Template:Networking rutos manual mobile

From Teltonika Networks Wiki
Revision as of 12:48, 15 September 2020 by Dziugas (talk | contribs)

Template:Networking rutos manual fw disclosure

Summary

The Mobile page is used to configure mobile connection settings.

This manual page provides an overview of the Mobile page in {{{name}}} devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Networking rutos manual webui basic advanced mode 75.gif

General

The General section is used to configure SIM card parameters that define how the device will establish a mobile connection.

SIM card settings


The SIM Card Settings section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.

[[File:Networking_{{{series}}}_manual_mobile_general_sim_card_settings.png|border|class=tlt-border]]

NB only
Field Value Description
Deny data roaming off | on; default: off Denies data connection on roaming conditions.
Service mode Auto | ; default: Auto Network connection type preference.
PIN integer [0000..999999999999]; default: none SIM card's PIN (Personal Identification Number) is a secret numeric password used authenticate the device to the SIM card. PIN codes are comprised of numbers only and the length can range from 4 to 12 symbols.

SMS limit settings


The SMS Limit Settings section provides you with the possibility to set up a maximum sent SMS message cap for your SIM card.

Networking rutos manual mobile general sms limit settings.png

Field Value Description
Enable SMS Limit off | on; default: off Turns SMS limiting on or off.
SMS limit count integer; default: none Sets the SMS sending cap, i.e., how many SMS messages can be sent from this SIM card during the specified period.
Period Day | Week | Month; default: Day Period for which SMS limiting should apply. After the period expires, the SMS limit counter will be reset.
Clear SMS Limit - (interactive button) Clears the SMS limit counter for the selected period.

Network operators

The Network operators section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to.

[[File:Networking_rutos_manual_mobile_network_operators_{{{dualsim}}}.png|border|class=tlt-border]]

Field Value Description
Active SIM SIM 1 | SIM 2; default: SIM 1 Displays which SIM card is currently active.
Current operator string; default: none Displays the name of the operator the which the device is currently connected.
Connection mode Auto | Manual; default: Auto Operator selection method.
  • Auto - selects the operator automatically.
  • Manual - requires you to select the operator manually. (More on this selection below.)

Manual operator selection


To select an operator manually, specify Connection mode: Manual and click 'Scan For Operators'.

[[File:Networking_rutos_manual_mobile_network_operators_scan_process_step_1_{{{dualsim}}}.png|border|class=tlt-border]]

Will be prompted with a pop-up asking if you're sure. Click 'Yes' if you wish to proceed.

Networking rutos manual mobile network operators scan process step 2.png

Wait for the scan to finish. As indicated by the onscreen message, the process can take up to 3 minutes.

Networking rutos manual mobile network operators scan proccess step 3.png


Once the scan has finished, you will see the results in the 'Operators List'.

Networking rutos manual mobile network operators operators list.png

In order to lock the SIM card to using a single operator, place a check mark next to the relevant entry in the list and click 'Save & Apply'.

[[Category:{{{name}}} Network section]]