Changes

Template:Networking rutos manual modbus (view source)

Revision as of 08:28, 24 April 2024

2,247 bytes added ,  24 April
no edit summary
Line 344: Line 344:  
     <tr>
 
     <tr>
 
         <td>Data type</td>
 
         <td>Data type</td>
−
         <td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool {{!}} PDU; default: <b>16bit INT, high byte first</b></td>
+
         <td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} 64bit INT (various Byte order) {{!}} 64bit UINT (various Byte order) {{!}} 64bit float (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool {{!}} PDU; default: <b>16bit INT, high byte first</b></td>
 
         <td>Defines how read data will be stored.</td>
 
         <td>Defines how read data will be stored.</td>
 
     </tr>
 
     </tr>
Line 418: Line 418:  
     <tr>
 
     <tr>
 
         <td>Compared condition data type</td>
 
         <td>Compared condition data type</td>
−
         <td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>16bit INT, high byte first</b></td>
+
         <td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} 64bit INT (various Byte order) {{!}} 64bit UINT (various Byte order) {{!}} 64bit float (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>16bit INT, high byte first</b></td>
 
         <td>Select data type that will be used for checking conditions.</td>
 
         <td>Select data type that will be used for checking conditions.</td>
 
     </tr>
 
     </tr>
Line 453: Line 453:  
     <tr>
 
     <tr>
 
         <td>Action</td>
 
         <td>Action</td>
−
         <td>Ubus event {{!}} {{#ifeq:{{{mobile}}}|1|<span style="color: #0054a6;">SMS</span> {{!}}|}} <span style="color: purple;">MODBUS Write Request</span>{{#switch:{{{series}}}|TCR1|TRB2|TRB2M=|#default= {{!}} Trigger output}} | <span style="color: red;">MQTT message</span>; default: <b>MODBUS Write Request</b></td>
+
         <td>Ubus event {{!}} {{#ifeq:{{{mobile}}}|1|<span style="color: #0054a6;">SMS</span> {{!}}|}} <span style="color: purple;">MODBUS Write Request</span>{{#switch:{{{series}}}|TCR1|OTD140|OTD160|OTD500|RUT14X=|#default= {{!}} <span style="color: green;">Trigger output</span>}} | <span style="color: red;">MQTT message</span>; default: <b>MODBUS Write Request</b></td>
 
         <td>Action that will be taken if the condition is met. Possible actions:
 
         <td>Action that will be taken if the condition is met. Possible actions:
 
             <ul>{{#ifeq: {{{mobile}}} | 1 |
 
             <ul>{{#ifeq: {{{mobile}}} | 1 |
 
                 <li><b>SMS</b> - sends and SMS message to a specified recipient(s).</li>|}}
 
                 <li><b>SMS</b> - sends and SMS message to a specified recipient(s).</li>|}}
 
                 <li><b>Modbus Request</b> - sends a Modbus Write request to a specified server.</li>
 
                 <li><b>Modbus Request</b> - sends a Modbus Write request to a specified server.</li>
−
{{#switch:{{{series}}}|TCR1|TRB2|TRB2M=|#default=<li><b>Trigger output</b> - changes state of selected I/O output pin.</li>}}
+
{{#switch:{{{series}}}|TCR1|OTD140|OTD160|OTD500|RUT14X=|#default=<li><b>Trigger output</b> - changes state of selected I/O output pin.</li>}}
 
             </ul>
 
             </ul>
 
         </td>
 
         </td>
Line 499: Line 499:  
     <tr>
 
     <tr>
 
         <td><span style="color: purple;">MODBUS Write Request: Executed action data type</span></td>
 
         <td><span style="color: purple;">MODBUS Write Request: Executed action data type</span></td>
−
         <td>8bit INT | 8bit UINT | 16bit INT, high byte first | 16bit INT, low byte first | 16bit UINT, high byte first | 16bit UINT, low byte first | 32bit float (various Byte order) | 32bit INT (various Byte order) | 32bit UNIT (various Byte order) | ASCII | Hex | Bool; default: <b>Bool</b></td>
+
         <td>8bit INT | 8bit UINT | 16bit INT, high byte first | 16bit INT, low byte first | 16bit UINT, high byte first | 16bit UINT, low byte first | 32bit float (various Byte order) | 32bit INT (various Byte order) | 32bit UNIT (various Byte order) 64bit INT (various Byte order) {{!}} 64bit UINT (various Byte order) {{!}} 64bit float (various Byte order) {{!}} ASCII | Hex | Bool; default: <b>Bool</b></td>
 
         <td>Select data type that will be used for executing action.</td>
 
         <td>Select data type that will be used for executing action.</td>
 
     </tr>
 
     </tr>
Line 511: Line 511:  
         <td>integer [0..65535]; default: <b>none</b></td>
 
         <td>integer [0..65535]; default: <b>none</b></td>
 
         <td>Register/Coil values to be written (multiple values must be separated by space character).</td>
 
         <td>Register/Coil values to be written (multiple values must be separated by space character).</td>
−
     </tr>{{#switch:{{{series}}}|TCR1|TRB2|TRB2M=|#default=
+
     </tr>{{#switch:{{{series}}}|TCR1|OTD140|OTD160|OTD500|RUT14X=|#default=
 
     <tr>
 
     <tr>
 
         <td><span style="color: green;">Trigger output: Output</span></td>{{#switch:{{{series}}}
 
         <td><span style="color: green;">Trigger output: Output</span></td>{{#switch:{{{series}}}
−
| RUTX|RUT2 =<td>4PIN output; default: <b>4PIN output</b></td>
+
| RUTX|RUT2|RUT2M =<td>Output (4); default: <b>Output (4)</b></td>
−
| TRB1|RUT3 =<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (3)</b></td>
+
| TRB1={{#ifeq:{{{name}}}|TRB141|<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4) {{!}} Relay (3,4,5) {{!}} Latching Relay (11,12,13); default: <b>Configurable Input/Output (3)</b></td>|<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (3)</b></td>}}|RUT30X|RUT301|RUT36X|RUT361|TRB5 =<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (3)</b></td>
−
| RUT9 =<td>Open collector output {{!}} Relay output {{!}} 4PIN output; default: <b>Open collector output</b></td>}}
+
| TRB2|TRB2M =<td>Configurable Input/Output (2) {{!}} Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (2)</b></td>
 +
| RUT9|RUT9M =<td>Output (4) {{!}} Isolated Output (3,4,8)  {{!}} Relay (5,10); default: <b>Output (4)</b></td>}}
 
         <td>Selects which output will be triggered.</td>
 
         <td>Selects which output will be triggered.</td>
 
     </tr>
 
     </tr>
Line 767: Line 768:  
     <tr>
 
     <tr>
 
         <td>Data type</td>
 
         <td>Data type</td>
−
         <td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool {{!}} PDU; default: <b>16bit INT, high byte first</b></td>
+
         <td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} 64bit INT (various Byte order) {{!}} 64bit UINT (various Byte order) {{!}} 64bit float (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool {{!}} PDU; default: <b>16bit INT, high byte first</b></td>
 
         <td>Defines how read data will be stored.</td>
 
         <td>Defines how read data will be stored.</td>
 
     </tr>
 
     </tr>
Line 841: Line 842:  
     <tr>
 
     <tr>
 
         <td>Compared condition data type</td>
 
         <td>Compared condition data type</td>
−
         <td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>16bit INT, high byte first</b></td>
+
         <td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} 64bit INT (various Byte order) {{!}} 64bit UINT (various Byte order) {{!}} 64bit float (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>16bit INT, high byte first</b></td>
 
         <td>Select data type that will be used for checking conditions.</td>
 
         <td>Select data type that will be used for checking conditions.</td>
 
     </tr>
 
     </tr>
Line 876: Line 877:  
     <tr>
 
     <tr>
 
         <td>Action</td>
 
         <td>Action</td>
−
         <td>{{#ifeq:{{{mobile}}}|1|SMS {{!}}|}} MODBUS Write Request{{#switch:{{{series}}}|TCR1|TRB2|TRB2M=|#default= {{!}} Trigger output}}; default: <b>MODBUS Write Request</b></td>
+
         <td>{{#ifeq:{{{mobile}}}|1|SMS {{!}}|}} MODBUS Write Request{{#switch:{{{series}}}|TCR1|OTD140|OTD160|OTD500|RUT14X=|#default= {{!}} <span style="color: green;">Trigger output</span>}}; default: <b>MODBUS Write Request</b></td>
 
         <td>Action that will be taken if the condition is met. Possible actions:
 
         <td>Action that will be taken if the condition is met. Possible actions:
 
             <ul>{{#ifeq: {{{mobile}}} | 1 |
 
             <ul>{{#ifeq: {{{mobile}}} | 1 |
 
                 <li><b>SMS</b> - sends and SMS message to a specified recipient(s).</li>|}}
 
                 <li><b>SMS</b> - sends and SMS message to a specified recipient(s).</li>|}}
 
                 <li><b>Modbus Request</b> - sends a Modbus Write request to a specified server.</li>
 
                 <li><b>Modbus Request</b> - sends a Modbus Write request to a specified server.</li>
−
{{#switch:{{{series}}}|TCR1|TRB2|TRB2M|#default=<li><b>Trigger output</b> - changes state of selected I/O output pin.</li>}}
+
{{#switch:{{{series}}}|TCR1|OTD140|OTD160|OTD500|RUT14X=|#default=<li><b>Trigger output</b> - changes state of selected I/O output pin.</li>}}
 
             </ul>
 
             </ul>
 
         </td>
 
         </td>
Line 912: Line 913:  
     <tr>
 
     <tr>
 
         <td><span style="color: purple;">MODBUS Write Request: Executed action data type</span></td>
 
         <td><span style="color: purple;">MODBUS Write Request: Executed action data type</span></td>
−
         <td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UNIT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>Bool</b></td>
+
         <td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UNIT (various Byte order) {{!}} 64bit INT (various Byte order) {{!}} 64bit UINT (various Byte order) {{!}} 64bit float (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>Bool</b></td>
 
         <td>Select data type that will be used for executing action.</td>
 
         <td>Select data type that will be used for executing action.</td>
 
     </tr>
 
     </tr>
Line 924: Line 925:  
         <td>integer [0..65535]; default: <b>none</b></td>
 
         <td>integer [0..65535]; default: <b>none</b></td>
 
         <td>Register/Coil values to be written (multiple values must be separated by space character).</td>
 
         <td>Register/Coil values to be written (multiple values must be separated by space character).</td>
−
     </tr>{{#switch:{{{series}}}|TCR1|TRB2|TRB2M=|#default=
+
     </tr>{{#switch:{{{series}}}|TCR1|OTD140|OTD160|OTD500|RUT14X=|#default=
 
     <tr>
 
     <tr>
 
         <td><span style="color: green;">Trigger output: Output</span></td>{{#switch:{{{series}}}
 
         <td><span style="color: green;">Trigger output: Output</span></td>{{#switch:{{{series}}}
−
| RUTX|RUT2 =<td>4PIN output; default: <b>4PIN output</b></td>
+
| RUTX|RUT2|RUT2M =<td>Output (4); default: <b>Output (4)</b></td>
−
| TRB1|RUT3 =<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (3)</b></td>
+
| TRB1={{#ifeq:{{{name}}}|TRB141|<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4) {{!}} Relay (3,4,5) {{!}} Latching Relay (11,12,13); default: <b>Configurable Input/Output (3)</b></td>|<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (3)</b></td>}}|RUT30X|RUT301|RUT36X|RUT361|TRB5 =<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (3)</b></td>
−
| RUT9 =<td>Open collector output {{!}} Relay output {{!}} 4PIN output; default: <b>Open collector output</b></td>}}
+
| TRB2|TRB2M =<td>Configurable Input/Output (2) {{!}} Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (2)</b></td>
 +
| RUT9|RUT9M =<td>Output (4) {{!}} Isolated Output (3,4,8)  {{!}} Relay (5,10); default: <b>Output (4)</b></td>}}
 
         <td>Selects which output will be triggered.</td>
 
         <td>Selects which output will be triggered.</td>
 
     </tr>
 
     </tr>
Line 1,068: Line 1,070:  
     <tr>
 
     <tr>
 
         <td>Data type</td>
 
         <td>Data type</td>
−
         <td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>16bit INT, high byte first</b></td>
+
         <td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} 64bit INT (various Byte order) {{!}} 64bit UINT (various Byte order) {{!}} 64bit float (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>16bit INT, high byte first</b></td>
 
         <td>Defines how read data will be stored.</td>
 
         <td>Defines how read data will be stored.</td>
 
     </tr>
 
     </tr>
Line 1,142: Line 1,144:  
     <tr>
 
     <tr>
 
         <td>Compared condition data type</td>
 
         <td>Compared condition data type</td>
−
         <td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>16bit INT, high byte first</b></td>
+
         <td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UINT (various Byte order) {{!}} 64bit INT (various Byte order) {{!}} 64bit UINT (various Byte order) {{!}} 64bit float (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>16bit INT, high byte first</b></td>
 
         <td>Select data type that will be used for checking conditions.</td>
 
         <td>Select data type that will be used for checking conditions.</td>
 
     </tr>
 
     </tr>
Line 1,212: Line 1,214:  
     <tr>
 
     <tr>
 
         <td><span style="color: purple;">MODBUS Write Request: Executed action data type</span></td>
 
         <td><span style="color: purple;">MODBUS Write Request: Executed action data type</span></td>
−
         <td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UNIT (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>Bool</b></td>
+
         <td>8bit INT {{!}} 8bit UINT {{!}} 16bit INT, high byte first {{!}} 16bit INT, low byte first {{!}} 16bit UINT, high byte first {{!}} 16bit UINT, low byte first {{!}} 32bit float (various Byte order) {{!}} 32bit INT (various Byte order) {{!}} 32bit UNIT (various Byte order) {{!}} 64bit INT (various Byte order) {{!}} 64bit UINT (various Byte order) {{!}} 64bit float (various Byte order) {{!}} ASCII {{!}} Hex {{!}} Bool; default: <b>Bool</b></td>
 
         <td>Select data type that will be used for executing action.</td>
 
         <td>Select data type that will be used for executing action.</td>
 
     </tr>
 
     </tr>
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/123933...124296"

Navigation menu