31,703
edits
Changes
Template:Networking rutos manual modbus (view source)
Revision as of 10:10, 5 October 2020
, 10:10, 5 October 2020→Request messages
<li><b>IP</b> - IP address of a Modbus TCP slave. IPv6 must be presented in full form (e.g., <i>2001:0db8:0000:0000:0000:8a2e:0370:7334</i>).</li>
<li><b>IP</b> - IP address of a Modbus TCP slave. IPv6 must be presented in full form (e.g., <i>2001:0db8:0000:0000:0000:8a2e:0370:7334</i>).</li>
<li><b>Port</b> - port number of the Modbus TCP slave.</li>
<li><b>Port</b> - port number of the Modbus TCP slave.</li>
<li><b>Timeout</b> - timeoutfor Modbus TCP connection, in seconds. Range [1..999].</li>
<li><b>Timeout</b> - timeout for Modbus TCP connection, in seconds. Range [1..999].</li>
<li><b>Slave ID</b> - Modbus TCP slave ID. Range [1..255].</li>
<li><b>Slave ID</b> - Modbus TCP slave ID. Range [1..255].</li>
<li><b>Modbus function</b> - Only these are supported at the moment:
<li><b>Modbus function</b> - Modbus task type that will be executed. Possible values are:
<ul>
<ul>
<li><b>3</b> - read holding registers;</li>
<li><b>3</b> - read holding registers;</li>
