Difference between revisions of "Template:Networking rutos manual modbus modbus tcp set parameters table"
From Teltonika Networks Wiki
Gytispieze (talk | contribs) |
|||
Line 36: | Line 36: | ||
<td>Relay output status</td> | <td>Relay output status</td> | ||
<td>202</td> | <td>202</td> | ||
− | <td> | + | <td>203</td> |
<td>1 {{!}} 0</td> | <td>1 {{!}} 0</td> | ||
<td>Toggles DOUT2 ON or OFF</td> | <td>Toggles DOUT2 ON or OFF</td> |
Revision as of 13:30, 27 January 2023
Set Parameters
The Modbus daemon can also set some device parameters.
value to set | register address | register number | register value | description |
---|---|---|---|---|
Hostname | 7 | 8 | Hostname (in decimal form) | Changes hostname |
Device name | 71 | 72 | Device name (in decimal form) | Changes device name |
Reboot | 206 | 207 | 1 | Reboots the router |
Switch PIN 3 state | 324 | 325 | 1|0 | Toggles PIN 3 ON or OFF, when output is selected |
Switch PIN 4 state | 325 | 326 | 1|0 | Toggles PIN 4 ON or OFF, when output is selected |
Switch PIN 3 direction | 326 | 327 | 1|0 | Toggles PIN 3 direction between INPUT (0) or OUTPUT (1) |
Switch PIN 4 direction | 327 | 328 | 1|0 | Toggles PIN 4 direction between INPUT (0) or OUTPUT (1) |
Change LAN IP | 394 | 395 | IPv4 (in decimal form) | Changes device LAN IP |