Difference between revisions of "Template:Networking rutos manual modbus modbus tcp set parameters table"

From Teltonika Networks Wiki
Line 60: Line 60:
 
                 <li>1 - switch to SIM1</li>
 
                 <li>1 - switch to SIM1</li>
 
                 <li>2 - switch to SIM2</li>
 
                 <li>2 - switch to SIM2</li>
        <li>0 - switch from the the SIM card opposite of the one currently in use (SIM1 → SIM2 or SIM2 → SIM1</li>
+
    <li>0 - switch from the the SIM card opposite of the one currently in use (SIM1 → SIM2 or SIM2 → SIM1)</li>
 
             </ul>
 
             </ul>
 
    </td>
 
    </td>
Line 152: Line 152:
 
       <td>1{{!}}0</td>
 
       <td>1{{!}}0</td>
 
       <td>Switches PIN 2 state to 0 (dry) / 1 (wet)</td>
 
       <td>Switches PIN 2 state to 0 (dry) / 1 (wet)</td>
 +
  </tr>
 +
    <tr>
 +
      <td> Switch ACL activity </td>
 +
      <td>345</td>
 +
      <td>1{{!}}0</td>
 +
      <td>Turns ACL activity ON or OFF</td>
 
   </tr>
 
   </tr>
 
     <tr>
 
     <tr>
 
       <td> Switch ACL ON/OFF </td>
 
       <td> Switch ACL ON/OFF </td>
       <td>345</td>
+
       <td>346</td>
 
       <td>1{{!}}0</td>
 
       <td>1{{!}}0</td>
 
       <td>Turns ACL functionality ON or OFF</td>
 
       <td>Turns ACL functionality ON or OFF</td>

Revision as of 10:38, 2 December 2021

Set Parameters


The Modbus daemon can also set some device parameters.

value to set register address register value description
Hostname 7 Hostname (in decimal form) Changes hostname
Device name 71 Device name (in decimal form) Changes device name
Reboot 206 1 Reboots the router
Switch PIN 3 state 324 1|0 Toggles PIN 3 ON or OFF, when output is selected
Switch PIN 4 state 325 1|0 Toggles PIN 4 ON or OFF, when output is selected
Switch PIN 3 direction 324 1|0 Toggles PIN 3 direction between INPUT (0) or OUTPUT (1)
Switch PIN 4 direction 325 1|0 Toggles PIN 4 direction between INPUT (0) or OUTPUT (1)