Changes

         <td>Disable connected check</td>

         <td>Disable connected check</td>

         <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>

         <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>

         <td>One-hop away EBGP peer using loopback address</td>

         <td>One-hop away EBGP peer using loopback address.</td>

     </tr>

     </tr>

</table>

</table>

     <tr>

     <tr>

     <td>Action</td>

     <td>Action</td>

         <td>Permit | Deny; default: <b>Permit</b></td>

         <td>Permit <nowiki>|</nowiki> Deny; default: <b>Permit</b></td>

         <td>When BGP traffic matches this rule, the device will take the action specified in this field, which is to either allow or block traffic.</td>

         <td>When BGP traffic matches this rule, the device will take the action specified in this field, which is to either allow or block traffic.</td>

     </tr>

     </tr>

     <tr>

     <tr>

     <td>Network</td>

     <td>Network</td>

         <td>ip/netmask | Any; default: <b>none</b></td>

         <td>ip/netmask <nowiki>|</nowiki> Any; default: <b>none</b></td>

         <td>Matches traffic destined or originating from (depends on 'Direction' selection) to the network specified in this field.</td>

         <td>Matches traffic destined or originating from (depends on 'Direction' selection) to the network specified in this field.</td>

     </tr>

     </tr>

     <tr>

     <tr>

     <td>Direction</td>

     <td>Direction</td>

         <td>Inbound | Outbound; default: <b>Inbound</b></td>

         <td>Inbound <nowiki>|</nowiki> Outbound; default: <b>Inbound</b></td>

         <td>Matches network traffic direction, which can either be traffic destined to this device (Inbound) or traffic originating from this device (Outbound).</td>

         <td>Matches network traffic direction, which can either be traffic destined to this device (Inbound) or traffic originating from this device (Outbound).</td>

     </tr>

     </tr>