9,312
edits
Changes
Template:Networking rutos manual rs232 (view source)
Revision as of 08:54, 10 May 2022
, 08:54, 10 May 2022no edit summary
</tr>}}
</tr>}}
</table>
</table>
==Cables==
==Cables==
[[File:Straight cable pinout v2.png|400px]]
[[File:Straight cable pinout v2.png|400px]]
----
----
[[File:Straight crossed rs232 cable pinout v2.png|400px]]
[[File:Straight crossed rs232 cable pinout v2.png|400px]]
----
----
Maximum cable length is 15 meters or the cable length equal to a capacitance of 2500 pF (for a 19200 baud rate). Using lower capacitance cables can increase the distance. Reducing communication speed can also increase maximum cable length.|}}
Maximum cable length is 15 meters or the cable length equal to a capacitance of 2500 pF (for a 19200 baud rate). Using lower capacitance cables can increase the distance. Reducing communication speed can also increase maximum cable length.|}}
==RS232 Configuration==
==RS232 Configuration==
<td>0 {{!}} 1; default: <b>0</b></td>
<td>0 {{!}} 1; default: <b>0</b></td>
<td>Default output state value, when the application is started.</td>
<td>Default output state value, when the application is started.</td>
</tr>
</tr><!--
<tr>
<tr>
<td><span style="color: red;">Server settings</span> | <span style="color: green;">UDP</span>: Number of clients</td>
<td><span style="color: red;">Server settings</span> | <span style="color: green;">UDP</span>: Number of clients</td>
<td>port; default: <b>none</b></td>
<td>port; default: <b>none</b></td>
<td>Specifies port number for predefined connection 2.</td>
<td>Specifies port number for predefined connection 2.</td>
</tr>
</tr>-->
<tr>
<tr>
<td><span style="color: purple;">Client settings</span>: Server Address</td>
<td><span style="color: purple;">Client settings</span>: Server Address</td>
<td>off | on; default: <b>off</b></td>
<td>off | on; default: <b>off</b></td>
<td>Turns RS232 echo on or off. RS232 echo is a loopback test usually used to check whether the RS232 cable is working properly.</td>
<td>Turns RS232 echo on or off. RS232 echo is a loopback test usually used to check whether the RS232 cable is working properly.</td>
</tr>
</tr><!--
<tr>
<tr>
<td><span style="color: red;">Server settings</span> | <span style="color: blue;">TCP</span>: Max clients</td>
<td><span style="color: red;">Server settings</span> | <span style="color: blue;">TCP</span>: Max clients</td>
<td>off | on; default: <b>off</b></td>
<td>off | on; default: <b>off</b></td>
<td>When enabled, a new TCP connection will be made after sending every data package.</td>
<td>When enabled, a new TCP connection will be made after sending every data package.</td>
</tr>
</tr>-->
</table>
</table>
