Teltonika Networks Wiki

Changes

Template:Networking rutos manual setup wizard (view source)

Revision as of 14:58, 18 April 2024

239 bytes removed ,  18 April
no edit summary
Line 1: Line 1:  
<!-- Template uses {{{name}}}, {{{series}}}, {{{mobile}}} (0), {{{wireless}}} (0)-->
 
<!-- Template uses {{{name}}}, {{{series}}}, {{{mobile}}} (0), {{{wireless}}} (0)-->
−
{{Template: Networking_rutos_manual_fw_disclosure
+
{{Template: Networking_device_manual_fw_disclosure
−
| fw_version ={{Template: Networking_rutos_manual_latest_fw
+
| series = {{{series}}}
 +
| name  = {{{name}}}
 +
| fw_version ={{Template: Networking_device_manual_latest_fw
 
  | series = {{{series}}}
 
  | series = {{{series}}}
 
  | name  = {{{name}}}
 
  | name  = {{{name}}}
 
  }}
 
  }}
 
}}
 
}}
−
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} Setup Wizard (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_rutos_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
+
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} Setup Wizard (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
−
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} Setup Wizard (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_rutos_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>|}}
+
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} Setup Wizard (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>|}}
 
==Summary==
 
==Summary==
   Line 13: Line 15:     
<ul>
 
<ul>
−
     <li>[[{{{name}}} NTP|Time]]</li>
+
     <li>[[{{{name}}} Administration#NTP|Time]]</li>
 
     <li>[[{{{name}}} LAN|LAN]]</li>                                                                                                                         
 
     <li>[[{{{name}}} LAN|LAN]]</li>                                                                                                                         
 
     {{#ifeq:{{{mobile}}}|0||<li>[[{{{name}}} WAN|WAN]]</li>}}                                                                                                   
 
     {{#ifeq:{{{mobile}}}|0||<li>[[{{{name}}} WAN|WAN]]</li>}}                                                                                                   
Line 37: Line 39:  
</ul>
 
</ul>
   −
[[File:Networking_rutos_manual_setup_wizard_set_new_password.png]]
+
[[File:Networking_rutos_manual_setup_wizard_set_new_password_v1.png]]
    
After you have entered the new password, click 'Submit'. Afterwards you will be redirected to the first page of the Setup Wizard.
 
After you have entered the new password, click 'Submit'. Afterwards you will be redirected to the first page of the Setup Wizard.
Line 45: Line 47:  
The <b>General</b> section is used to configure the device's time, language and WebUI mode settings.
 
The <b>General</b> section is used to configure the device's time, language and WebUI mode settings.
   −
[[File:Networking_rutos_manual_setup_wizard_general_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_setup_wizard_general_v3.png|border|class=tlt-border]]
   −
If you wish to set the device's time zone settings later instead, you can do so via the <i>Services → [[{{{name}}} NTP|NTP]]</i> page.
+
If you wish to set the device's time zone settings later instead, you can do so via the <i>Administration → [[{{{name}}}_Administration#NTP|NTP]]</i> page.
   −
WebUI mode can be set in the <i>System → Administration → [[{{{name}}} Administration#General|General]]</i> page or by clicking the button under "Mode", which is located at the top-right corner of the WebUI:
+
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
−
 
+
| series = {{{series}}}
−
[[File:Networking_{{lc:{{{series}}}}}_manual_webui_basic_advanced_mode.gif|border|class=tlt-border]]
+
}}
    
==LAN==
 
==LAN==
Line 57: Line 59:  
The <b>LAN</b> section is used to configure the device's local area network (LAN) and DHCP server settings. A DHCP (Dynamic Host Configuration Protocol) server can automatically configure the TCP/IP settings for any device that requests such a service. If you connect a device that has been configured to obtain an IP address automatically, the DHCP server will lease out an IP address from the available IP pool and the device will be able to communicate within the device's private network.
 
The <b>LAN</b> section is used to configure the device's local area network (LAN) and DHCP server settings. A DHCP (Dynamic Host Configuration Protocol) server can automatically configure the TCP/IP settings for any device that requests such a service. If you connect a device that has been configured to obtain an IP address automatically, the DHCP server will lease out an IP address from the available IP pool and the device will be able to communicate within the device's private network.
   −
[[File:Networking_rutos_manual_setup_wizard_lan_{{{lan}}}_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_setup_wizard_lan_{{{lan}}}_v3.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 66: Line 68:  
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td>IP address</td>
+
         <td>IPv4 address</td>
 
         <td>ip; default: <b>192.168.{{{lan}}}.1</b></td>
 
         <td>ip; default: <b>192.168.{{{lan}}}.1</b></td>
 
         <td>The LAN interface's IPv4 address. An IP address identifies a device on a network and allows it to communicate with other devices.</td>
 
         <td>The LAN interface's IPv4 address. An IP address identifies a device on a network and allows it to communicate with other devices.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td>Netmask</td>
+
         <td>IPv4 netmask</td>
 
         <td>netmask; default: <b>255.255.255.0</b></td>
 
         <td>netmask; default: <b>255.255.255.0</b></td>
 
         <td>A <b>[[What is a Netmask?|netmask]]</b> is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes the device.</td>
 
         <td>A <b>[[What is a Netmask?|netmask]]</b> is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes the device.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td>Enable DHCP</td>
+
         <td>Enable DHCPv4</td>
−
         <td>off | on; default: <b>on</b></td>
+
         <td>off {{!}} on; default: <b>on</b></td>
−
         <td>Turns the DHCP server on or off.</td>
+
         <td>Turns the DHCPv4 server on or off.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td>Start IP</td>
+
         <td>Enable DHCPv6</td>
−
         <td>integer [1..255]; default: <b>100</b></td>
+
         <td>off {{!}} on; default: <b>on</b></td>
−
         <td>The DHCP server's IP address range start value.</td>
+
         <td>Turns the DHCPv6 server on or off.</td>
−
    </tr>
  −
    <tr>
  −
        <td>End IP</td>
  −
        <td>integer [1..255]; default: <b>150</b></td>
  −
        <td>End IP, i.e., the last possible IP in the selected range for the DHCP server.</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Lease time</td>
  −
        <td>integer [2..999999]; default: <b>12</b></td>
  −
        <td>A DHCP lease will expire after the amount of time specified in this field and the device that was using the lease will have to request a new one. However, if the device stays connected, its lease will be renewed after half of the specified amount of time passes (e.g., if lease time is 12 hours, then every 6 hours the device will ask the DHCP server to renew its lease).<br>The minimal amount of time that can be specified is 2 minutes.</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Units</td>
  −
        <td>Hours | Minutes; default: <b>Hours</b></td>
  −
        <td>Lease time measuring units.</td>
   
     </tr>
 
     </tr>
 
</table>
 
</table>
   −
If you wish to set the device's LAN and DHCP settings later instead, you can do so via the <i>Network → [[{{{name}}} LAN|LAN]]</i> page.
+
If you wish to set the device's LAN and DHCP settings later instead, you can do so via the <i>Network → [[{{{name}}}_DHCP]]</i> page.
 
{{#ifeq: {{{mobile}}} | 1 |  
 
{{#ifeq: {{{mobile}}} | 1 |  
 
==Mobile==
 
==Mobile==
Line 108: Line 95:  
The <b>Mobile</b> section is used to configure the device's SIM card parameters.
 
The <b>Mobile</b> section is used to configure the device's SIM card parameters.
   −
[[File:Networking_rutos_manual_setup_wizard_mobile.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_setup_wizard_mobile_v1.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 133: Line 120:  
     <tr>
 
     <tr>
 
         <td><span style="color:chocolate">Custom:</span> Authentication Type</td>
 
         <td><span style="color:chocolate">Custom:</span> Authentication Type</td>
−
         <td>None {{!}} PAP/CHAP (both) {{!}} PAP {{!}} CHAP; default: <b>None</b></td>
+
         <td>None {{!}} <span style="color:red">PAP</span> {{!}} <span style="color:red">CHAP</span>; default: <b>None</b></td>
 
         <td>The method that your carrier uses to authenticate new connections on its network. If you select PAP, CHAP or
 
         <td>The method that your carrier uses to authenticate new connections on its network. If you select PAP, CHAP or
 
             both you will be required to enter a username and password.</td>
 
             both you will be required to enter a username and password.</td>
 +
    </tr>
 +
    <tr>
 +
        <td><span style="color:red">Username</span></td>
 +
        <td>string; default: <b>none</b></td>
 +
        <td>Your username that you would use to connect to your GSM carrier's network.</td>
 +
    </tr>
 +
    <tr>
 +
        <td><span style="color:red">Password</span></td>
 +
        <td>string; default: <b>none</b></td>
 +
        <td>Your password that you would use to connect to your GSM carrier's network.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 152: Line 149:  
The <b>WiFi</b> section is used to configure the device's WiFi Access Point{{#ifeq:{{{wifi}}}|5|s|}} (AP{{#ifeq:{{{wifi}}}|5|s|}}). {{#ifeq:{{{wifi}}}|5|The {{{name}}} supports two types of WiFi: 2.4 GHz and 5 GHz. 2.4 GHz WiFi provides better coverage and works at a longer range, but has lower data transfer speeds when compared to 5 GHz WiFi.|}}
 
The <b>WiFi</b> section is used to configure the device's WiFi Access Point{{#ifeq:{{{wifi}}}|5|s|}} (AP{{#ifeq:{{{wifi}}}|5|s|}}). {{#ifeq:{{{wifi}}}|5|The {{{name}}} supports two types of WiFi: 2.4 GHz and 5 GHz. 2.4 GHz WiFi provides better coverage and works at a longer range, but has lower data transfer speeds when compared to 5 GHz WiFi.|}}
   −
[[File:Networking_rutos_manual_setup_wizard_wifi_{{{wifi}}}.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_setup_wizard_wifi_{{{wifi}}}_v1.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 166: Line 163:  
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
     <td>ESSID</td>
+
     <td>SSID</td>
 
         <td>string; default: <b>RUT_<last 4 symbols of WiFi MAC>{{#ifeq:{{{wifi}}}|5|_<frequency>|}}</b></td>
 
         <td>string; default: <b>RUT_<last 4 symbols of WiFi MAC>{{#ifeq:{{{wifi}}}|5|_<frequency>|}}</b></td>
 
         <td>An identification string (name) for the access point. It is how the access point will be seen by connecting devices.</td>
 
         <td>An identification string (name) for the access point. It is how the access point will be seen by connecting devices.</td>
Line 185: Line 182:  
In order to add a device(s) to RMS, get yourself acquainted by watching [https://www.youtube.com/watch?v=bZeqdrAcdVU this instructional video] and register an account by [https://rms.teltonika.lt/ clicking here]. <b>Each unique device receives a free month-long RMS license</b> when added to RMS for the first time.  
 
In order to add a device(s) to RMS, get yourself acquainted by watching [https://www.youtube.com/watch?v=bZeqdrAcdVU this instructional video] and register an account by [https://rms.teltonika.lt/ clicking here]. <b>Each unique device receives a free month-long RMS license</b> when added to RMS for the first time.  
   −
[[File:Networking_rutos_manual_setup_wizard_rms_{{{rms}}}_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_setup_wizard_rms_{{{rms}}}_v4.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 192: Line 189:  
       <th>Value</th>
 
       <th>Value</th>
 
       <th>Description</th>
 
       <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
        <td>Connect</td>
 +
        <td>- (interactive button)</td>
 +
        <td>Initiates communication with RMS.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 213: Line 215:  
         <td>integer [0..65535]; default: <b>15009</b></td>
 
         <td>integer [0..65535]; default: <b>15009</b></td>
 
         <td>Port number for connecting to RMS. If you're using regular RMS, just leave the default port (<i>15009</i>).</td>
 
         <td>Port number for connecting to RMS. If you're using regular RMS, just leave the default port (<i>15009</i>).</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Authentication code</td>
 +
        <td>string; default: <b>none</b></td>
 +
        <td>Authentication code provided by RMS after adding the device.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/98880...124046"