Difference between revisions of "Template:Networking rutos manual setup wizard"

From Teltonika Networks Wiki
 
(33 intermediate revisions by 6 users not shown)
Line 1: Line 1:
 
<!-- Template uses {{{name}}}, {{{series}}}, {{{mobile}}} (0), {{{wireless}}} (0)-->
 
<!-- Template uses {{{name}}}, {{{series}}}, {{{mobile}}} (0), {{{wireless}}} (0)-->
−
{{Template:Networking_rutos_manual_fw_disclosure
+
{{Template: Networking_device_manual_fw_disclosure
−
| fw_version = {{{series}}}_R_00.02.03.1
+
| series = {{{series}}}
−
| series     = {{{series}}}
+
| name  = {{{name}}}
 +
| fw_version ={{Template: Networking_device_manual_latest_fw
 +
| series = {{{series}}}
 +
| name  = {{{name}}}
 +
}}
 
}}
 
}}
−
 
+
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} Setup Wizard (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
 +
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} Setup Wizard (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>|}}
 
==Summary==
 
==Summary==
  
Line 10: Line 15:
  
 
<ul>
 
<ul>
−
     <li>[[{{{name}}} NTP|Time]]</li>
+
     <li>[[{{{name}}} Administration#NTP|Time]]</li>
 
     <li>[[{{{name}}} LAN|LAN]]</li>                                                                                                                         
 
     <li>[[{{{name}}} LAN|LAN]]</li>                                                                                                                         
 
     {{#ifeq:{{{mobile}}}|0||<li>[[{{{name}}} WAN|WAN]]</li>}}                                                                                                   
 
     {{#ifeq:{{{mobile}}}|0||<li>[[{{{name}}} WAN|WAN]]</li>}}                                                                                                   
Line 34: Line 39:
 
</ul>
 
</ul>
  
−
[[File:Networking_rutx_manual_setup_wizard_password_v1.png]]
+
[[File:Networking_rutos_manual_setup_wizard_set_new_password_v1.png]]
  
 
After you have entered the new password, click 'Submit'. Afterwards you will be redirected to the first page of the Setup Wizard.
 
After you have entered the new password, click 'Submit'. Afterwards you will be redirected to the first page of the Setup Wizard.
Line 40: Line 45:
 
==General==
 
==General==
  
−
The <b>General</b> section is used to configure the device's time settings.
+
The <b>General</b> section is used to configure the device's time, language and WebUI mode settings.
  
−
[[File:Networking_rutx_manual_setup_wizard_general_v1.png]]
+
[[File:Networking_rutos_manual_setup_wizard_general_v3.png|border|class=tlt-border]]
  
−
If you wish to set the device's time zone settings later instead, you can do so via the <i>Services → [[{{{name}}} NTP|NTP]]</i> page.
+
If you wish to set the device's time zone settings later instead, you can do so via the <i>Administration → [[{{{name}}}_Administration#NTP|NTP]]</i> page.
 +
 
 +
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
 +
| series = {{{series}}}
 +
}}
  
 
==LAN==
 
==LAN==
Line 50: Line 59:
 
The <b>LAN</b> section is used to configure the device's local area network (LAN) and DHCP server settings. A DHCP (Dynamic Host Configuration Protocol) server can automatically configure the TCP/IP settings for any device that requests such a service. If you connect a device that has been configured to obtain an IP address automatically, the DHCP server will lease out an IP address from the available IP pool and the device will be able to communicate within the device's private network.
 
The <b>LAN</b> section is used to configure the device's local area network (LAN) and DHCP server settings. A DHCP (Dynamic Host Configuration Protocol) server can automatically configure the TCP/IP settings for any device that requests such a service. If you connect a device that has been configured to obtain an IP address automatically, the DHCP server will lease out an IP address from the available IP pool and the device will be able to communicate within the device's private network.
  
−
{{#ifeq:{{{series}}}|TRB14X|
+
[[File:Networking_rutos_manual_setup_wizard_lan_{{{lan}}}_v3.png|border|class=tlt-border]]
−
[[File:Networking_trb1_manual_setup_wizard_lan_v1.png|border|class=tlt-border]] <!-- 192.168.2.1 -->
 
−
|
 
−
[[File:Networking_rutx_manual_setup_wizard_lan_v3.png|border|class=tlt-border]] <!-- 192.168.1.1 -->
 
−
}}
 
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 63: Line 68:
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td>IP address</td>
+
         <td>IPv4 address</td>
−
         <td>ip; default: <b>{{#ifeq:{{{series}}}|TRB14X|192.168.2.1|192.168.1.1}}</b></td>
+
         <td>ip; default: <b>192.168.{{{lan}}}.1</b></td>
 
         <td>The LAN interface's IPv4 address. An IP address identifies a device on a network and allows it to communicate with other devices.</td>
 
         <td>The LAN interface's IPv4 address. An IP address identifies a device on a network and allows it to communicate with other devices.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td>Netmask</td>
+
         <td>IPv4 netmask</td>
 
         <td>netmask; default: <b>255.255.255.0</b></td>
 
         <td>netmask; default: <b>255.255.255.0</b></td>
 
         <td>A <b>[[What is a Netmask?|netmask]]</b> is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes the device.</td>
 
         <td>A <b>[[What is a Netmask?|netmask]]</b> is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes the device.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td>Enable DHCP</td>
+
         <td>Enable DHCPv4</td>
 
         <td>off {{!}} on; default: <b>on</b></td>
 
         <td>off {{!}} on; default: <b>on</b></td>
−
         <td>Turns the DHCP server on or off.</td>
+
         <td>Turns the DHCPv4 server on or off.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td>Start</td>
+
         <td>Enable DHCPv6</td>
−
         <td>integer [1..255]; default: <b>100</b></td>
+
         <td>off {{!}} on; default: <b>on</b></td>
−
        <td>The starting IP address value. e.g., if your device's LAN IP is 192.168.1.1 and your subnet mask is 255.255.255.0 that means that in your network a valid IP address has to be in the range of [192.168.1.0..192.168.1.254] (192.168.1.255 is a special unavailable address). If the Start value is set to 100 then the DHCP server will only lease out addresses starting from 192.168.1.<b>100</b>.</td>
+
         <td>Turns the DHCPv6 server on or off.</td>
−
    </tr>
 
−
    <tr>
 
−
        <td>Limit</td>
 
−
        <td>integer [1..255]; default: <b>150</b></td>
 
−
        <td>How many addresses the DHCP server can lease out. Continuing from the example above: if the start address is 192.168.1.100 and the server can lease out 150 addresses, available addresses will be from 192.168.1.<b>100</b> to 192.168.1.<b>249</b> (<i>100 + 150 – 1 = 249</i>; this is because the first address is inclusive).</td>
 
−
    </tr>
 
−
    <tr>
 
−
        <td>Lease time</td>
 
−
        <td>interger [2..999999]; default: <b>12</b></td>
 
−
        <td>A DHCP lease will expire after the amount of time specified in this field and the device that was using the lease will have to request a new one. However, if the device stays connected, its lease will be renewed after half of the specified amount of time passes (e.g., if lease time is 12 hours, then every 6 hours the device will ask the DHCP server to renew its lease).<br>The minimal amount of time that can be specified is 2 minutes.</td>
 
−
    </tr>
 
−
    <tr>
 
−
        <td>Units</td>
 
−
        <td>Hours {{!}} Minutes; default: <b>Hours</b></td>
 
−
         <td>Lease time measuring units.</td>
 
 
     </tr>
 
     </tr>
 
</table>
 
</table>
  
−
If you wish to set the device's LAN and DHCP settings later instead, you can do so via the <i>Network → [[{{{name}}} LAN|LAN]]</i> page.
+
If you wish to set the device's LAN and DHCP settings later instead, you can do so via the <i>Network → [[{{{name}}}_DHCP]]</i> page.
−
{{#ifeq:{{{mobile}}}|0||  
+
{{#ifeq: {{{mobile}}} | 1 |  
 
==Mobile==
 
==Mobile==
  
 
The <b>Mobile</b> section is used to configure the device's SIM card parameters.
 
The <b>Mobile</b> section is used to configure the device's SIM card parameters.
  
−
[[File:Networking_rutx_manual_setup_wizard_wan_v3.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_setup_wizard_mobile_v1.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 130: Line 120:
 
     <tr>
 
     <tr>
 
         <td><span style="color:chocolate">Custom:</span> Authentication Type</td>
 
         <td><span style="color:chocolate">Custom:</span> Authentication Type</td>
−
         <td>None {{!}} PAP/CHAP (both) {{!}} PAP {{!}} CHAP; default: <b>None</b></td>
+
         <td>None {{!}} <span style="color:red">PAP</span> {{!}} <span style="color:red">CHAP</span>; default: <b>None</b></td>
 
         <td>The method that your carrier uses to authenticate new connections on its network. If you select PAP, CHAP or
 
         <td>The method that your carrier uses to authenticate new connections on its network. If you select PAP, CHAP or
 
             both you will be required to enter a username and password.</td>
 
             both you will be required to enter a username and password.</td>
 +
    </tr>
 +
    <tr>
 +
        <td><span style="color:red">Username</span></td>
 +
        <td>string; default: <b>none</b></td>
 +
        <td>Your username that you would use to connect to your GSM carrier's network.</td>
 +
    </tr>
 +
    <tr>
 +
        <td><span style="color:red">Password</span></td>
 +
        <td>string; default: <b>none</b></td>
 +
        <td>Your password that you would use to connect to your GSM carrier's network.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 143: Line 143:
  
 
If you wish to set the device's Mobile WAN settings later instead, you can do so via the <i>Network → [[{{{name}}} WAN|WAN]]</i> page.
 
If you wish to set the device's Mobile WAN settings later instead, you can do so via the <i>Network → [[{{{name}}} WAN|WAN]]</i> page.
−
}}
+
|}}
−
{{#ifeq:{{{wireless}}}|0||  
+
{{#ifeq: {{{wireless}}} | 1 |  
 
==WiFi==
 
==WiFi==
  
−
The <b>WiFi</b> section is used to configure the device's WiFi access points (APs). The {{{name}}} supports two types of WiFi: 2.4 GHz and 5 GHz. 2.4 GHz WiFi provides better coverage and works at a longer range, but has lower data transfer speeds when compared to 5 GHz WiFi.
+
The <b>WiFi</b> section is used to configure the device's WiFi Access Point{{#ifeq:{{{wifi}}}|5|s|}} (AP{{#ifeq:{{{wifi}}}|5|s|}}). {{#ifeq:{{{wifi}}}|5|The {{{name}}} supports two types of WiFi: 2.4 GHz and 5 GHz. 2.4 GHz WiFi provides better coverage and works at a longer range, but has lower data transfer speeds when compared to 5 GHz WiFi.|}}
  
−
[[File:Networking_rutx_manual_setup_wizard_wifi_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_setup_wizard_wifi_{{{wifi}}}_v1.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 161: Line 161:
 
         <td>off {{!}} on; default: <b>on</b></td>
 
         <td>off {{!}} on; default: <b>on</b></td>
 
         <td>Turns the WiFi access point on or off.</td>
 
         <td>Turns the WiFi access point on or off.</td>
−
    </tr>
 
−
    <tr>
 
−
    <td>Channel</td>
 
−
        <td>WiFi channel number {{!}} auto; default: <b>auto</b></td>
 
−
        <td>WiFi channel used by the access point. When this field is set to 'auto', the access point will choose the least populated channel.</td>
 
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
     <td>SSID</td>
 
     <td>SSID</td>
−
         <td>string; default: <b>RUT_<last 4 symbols of WiFi MAC>_<frequency></b></td>
+
         <td>string; default: <b>RUT_<last 4 symbols of WiFi MAC>{{#ifeq:{{{wifi}}}|5|_<frequency>|}}</b></td>
−
         <td>The Service Set Identifier (SSID) is an identification string (name) for the access point. It is how the access point will be seen by connecting devices.</td>
+
         <td>An identification string (name) for the access point. It is how the access point will be seen by connecting devices.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
     <td>Encryption</td>
+
     <td>Password</td>
−
         <td>No encryption {{!}} WPA-PSK {{!}} WPA2-PSK {{!}} WPA-PSK/WPA2-PSK Mixed Mode {{!}} WPA-EAP {{!}} WPA2-EAP; default: <b>WPA2-PSK</b></td>
+
         <td>string; default: <b>unique to each device</b></td>
−
         <td>The type of encryption used by the access point.</td>
+
         <td>A password used to authenticate users to this access point.</td>
 
     </tr>
 
     </tr>
−
    <tr>
+
</table>
−
    <td>Cipher</td>
 
−
        <td>auto {{!}} Force CCMP (AES) {{!}} Force TKIP {{!}} Force TKIP and CCMP (AES); default: <b>Force TKIP and CCMP (AES)</b></td>
 
−
        <td>An algorithm for performing encryption and decryption.</td>
 
−
    </tr>
 
−
    <tr>
 
−
    <td>Key</td>
 
−
        <td>string; default: <b>unique to each device</b></td>
 
−
        <td>A password used to authenticate users to the access point.</td>
 
−
    </tr></table>
 
  
 
If you wish to set the device's WiFi settings later instead, you can do so via the <i>Network → [[{{{name}}} Wireless|Wireless]]</i> page.
 
If you wish to set the device's WiFi settings later instead, you can do so via the <i>Network → [[{{{name}}} Wireless|Wireless]]</i> page.
−
}}
+
|}}
−
 
 
 
==RMS==
 
==RMS==
  
Line 197: Line 182:
 
In order to add a device(s) to RMS, get yourself acquainted by watching [https://www.youtube.com/watch?v=bZeqdrAcdVU this instructional video] and register an account by [https://rms.teltonika.lt/ clicking here]. <b>Each unique device receives a free month-long RMS license</b> when added to RMS for the first time.  
 
In order to add a device(s) to RMS, get yourself acquainted by watching [https://www.youtube.com/watch?v=bZeqdrAcdVU this instructional video] and register an account by [https://rms.teltonika.lt/ clicking here]. <b>Each unique device receives a free month-long RMS license</b> when added to RMS for the first time.  
  
−
{{#ifeq:{{{series}}}|RUTX|
+
[[File:Networking_rutos_manual_setup_wizard_rms_{{{rms}}}_v4.png|border|class=tlt-border]]
−
[[File:Networking_rutx_manual_setup_wizard_rms_v2.png]]
 
−
|
 
−
[[File:Networking_trb1_manual_setup_wizard_rms_v1.png|border|class=tlt-border]]
 
−
}}
 
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 208: Line 189:
 
       <th>Value</th>
 
       <th>Value</th>
 
       <th>Description</th>
 
       <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
        <td>Connect</td>
 +
        <td>- (interactive button)</td>
 +
        <td>Initiates communication with RMS.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Connection type</td>
 
         <td>Connection type</td>
−
         <td>Enabled {{!}} Standby {{!}} Disabled; default: <b>Enabled</b></td>
+
         <td>Enabled | Standby | Disabled; default: <b>Enabled</b></td>
 
         <td>Defines how the device will connect to RMS:
 
         <td>Defines how the device will connect to RMS:
 
             <ul>
 
             <ul>
Line 222: Line 208:
 
     <tr>
 
     <tr>
 
         <td>Hostname</td>
 
         <td>Hostname</td>
−
         <td>host {{!}} ip; default: <b>rms.teltonika.lt</b></td>
+
         <td>host | ip; default: <b>rms.teltonika.lt</b></td>
 
         <td>Address of the RMS server. If you're using regular RMS, just leave the default address (<i>rms.teltonika.lt</i>).</td>
 
         <td>Address of the RMS server. If you're using regular RMS, just leave the default address (<i>rms.teltonika.lt</i>).</td>
 
     </tr>
 
     </tr>
Line 229: Line 215:
 
         <td>integer [0..65535]; default: <b>15009</b></td>
 
         <td>integer [0..65535]; default: <b>15009</b></td>
 
         <td>Port number for connecting to RMS. If you're using regular RMS, just leave the default port (<i>15009</i>).</td>
 
         <td>Port number for connecting to RMS. If you're using regular RMS, just leave the default port (<i>15009</i>).</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Authentication code</td>
 +
        <td>string; default: <b>none</b></td>
 +
        <td>Authentication code provided by RMS after adding the device.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>

Latest revision as of 14:58, 18 April 2024

The information in this page is updated in accordance with firmware version .


Summary

The Setup Wizard is a tool that offers a simplified version of other WebUI pages used to set some of the most relevant device parameters:

  • [[{{{name}}} Administration#NTP|Time]]
  • [[{{{name}}} LAN|LAN]]
  • [[{{{name}}} WAN|WAN]]
  • [[{{{name}}} Wireless|WiFi]]
  • [[{{{name}}}_Cloud_Solutions#RMS|RMS]]

You will be greeted with the Setup Wizard the first time you login, after you have changed the device default password. On other logins you will be redirected to the [[{{{name}}} Overview|Overview]] page, but you can reach the Setup Wizard any time via the System → Setup Wizard page.

This page is an overview of the Setup Wizard tool for {{{name}}} devices.

Set new password

On your very first login you will be required to change the device default password. This is done for safety reasons. In many cases devices are used to provide access to remote networks and systems. Since many manufacturers use similar default passwords (like admin, admin01, admin123, etc.) it is easy for attackers to gain access to devices that use such passwords and compromise the systems behind them. Therefore, to avoid such malicious attacks, this step is mandatory and you will not able to access the rest of the WebUI before you change the password.

The new password must contain:

  • 8-32 characters;
  • at least one upper case letter;
  • at least one lower case letter;
  • at least one digit.

Networking rutos manual setup wizard set new password v1.png

After you have entered the new password, click 'Submit'. Afterwards you will be redirected to the first page of the Setup Wizard.

General

The General section is used to configure the device's time, language and WebUI mode settings.

Networking rutos manual setup wizard general v3.png

If you wish to set the device's time zone settings later instead, you can do so via the Administration → [[{{{name}}}_Administration#NTP|NTP]] page.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Networking rutos manual webui basic advanced mode 75.gif

LAN

The LAN section is used to configure the device's local area network (LAN) and DHCP server settings. A DHCP (Dynamic Host Configuration Protocol) server can automatically configure the TCP/IP settings for any device that requests such a service. If you connect a device that has been configured to obtain an IP address automatically, the DHCP server will lease out an IP address from the available IP pool and the device will be able to communicate within the device's private network.

[[File:Networking_rutos_manual_setup_wizard_lan_{{{lan}}}_v3.png|border|class=tlt-border]]

Field Value Description
IPv4 address ip; default: 192.168.{{{lan}}}.1 The LAN interface's IPv4 address. An IP address identifies a device on a network and allows it to communicate with other devices.
IPv4 netmask netmask; default: 255.255.255.0 A netmask is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes the device.
Enable DHCPv4 off | on; default: on Turns the DHCPv4 server on or off.
Enable DHCPv6 off | on; default: on Turns the DHCPv6 server on or off.

If you wish to set the device's LAN and DHCP settings later instead, you can do so via the Network → [[{{{name}}}_DHCP]] page.


RMS

This section is used to configure the settings required to connect the device to the RMS (Remote Management System) - a cloud system designed by Teltonika and intended for remote monitoring and management of Teltonika-Networks products.

In order to add a device(s) to RMS, get yourself acquainted by watching this instructional video and register an account by clicking here. Each unique device receives a free month-long RMS license when added to RMS for the first time.

[[File:Networking_rutos_manual_setup_wizard_rms_{{{rms}}}_v4.png|border|class=tlt-border]]

Field Value Description
Connect - (interactive button) Initiates communication with RMS.
Connection type Enabled | Standby | Disabled; default: Enabled Defines how the device will connect to RMS:
  • Enabled - the device attempts to connect to RMS every 2-5 minutes (every 2 minutes the first hour; then every 5 minutes). If it cannot connect for 14 days, it will enter Standby mode.
  • Standby - the device attempts to connect to RMS every 6 hours.
  • Disabled - RMS functionality is disabled.
Hostname host | ip; default: rms.teltonika.lt Address of the RMS server. If you're using regular RMS, just leave the default address (rms.teltonika.lt).
Port integer [0..65535]; default: 15009 Port number for connecting to RMS. If you're using regular RMS, just leave the default port (15009).
Authentication code string; default: none Authentication code provided by RMS after adding the device.

If you wish to set the device's RMS settings later instead, you can do so via the Services → Cloud Solutions → [[{{{name}}}_Cloud_Solutions#RMS|RMS]] page.

[[Category:{{{name}}} System section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_setup_wizard&oldid=124046"