9,312
edits
Changes
Template:Networking rutos manual snmp (view source)
Revision as of 14:16, 1 September 2022
, 14:16, 1 September 2022→Summary
<!-- Template uses {{{name}}}, {{{series}}}, and if device doesnt have mobile then {{{mobile}}} = 0-->
<!-- Template uses {{{name}}}, {{{series}}}, and if device doesn't have mobile then {{{mobile}}} = 0-->
{{Template:Networking_rutos_manual_fw_disclosure
{{Template: Networking_rutos_manual_fw_disclosure
| fw_version = {{{series}}}_R_00.02.05
| fw_version ={{Template: Networking_rutos_manual_latest_fw
| series = {{{series}}}
| series = {{{series}}}
| name = {{{name}}}
}}
}}
}}
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} SNMP (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_rutos_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} SNMP (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_rutos_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>|}}
==Summary==
==Summary==
<b>Simple Network Management Protocol (SNMP)</b> is a network management protocol used for collecting information and configuring network devices. This page is an overview of the SNMP function in {{{name}}} devices.
<b>Simple Network Management Protocol (SNMP)</b> is a network management protocol used for collecting information and configuring network devices. This page is an overview of the SNMP function in {{{name}}} devices.
{{#switch: {{{series}}} | RUTX|TRB1|TRB5=|#default=
<u><b>
Note:</b> SNMP is additional software that can be installed from the <b>Services → [[{{{name}}} Package Manager|Package Manager]]</b> page.</u>
}}
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
</tr>
</tr>
<tr>
<tr>
<td>Protocol</td>
<td>IP family</td>
<td>UDP | TCP; default: '''UDP'''</td>
<td>IPv4 | IPv6 | IPv4v6; default: '''IPv4'''</td>
<td>SNMP service's protocol.</td>
<td>IP family used by SNMP.</td>
</tr>
</tr>
<tr>
<tr>
[[File:Networking_rutos_manual_snmp_snmp_v3_users_snmp_user_configuration.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_snmp_snmp_v3_users_snmp_user_configuration.png|border|class=tlt-border]]
<b>Note</b>: this table has coloring scheme to indicate which fields can be seen with different configuration.
<table class="nd-mantable">
<table class="nd-mantable">
</tr>
</tr>
</table>
</table>
==Communities==
==Communities==
<td>ip; default: <b>none</b></td>
<td>ip; default: <b>none</b></td>
<td>Netmask for IP of the community.</td>
<td>Netmask for IP of the community.</td>
</tr>
<tr>
<td>Access Mode</td>
<td>Read-Only | Read-Write; default: <b>Read-Only</b></td>
<td>Access mode for current community.</td>
</tr>
</table>
SNMPv6 community configuration page:
[[File:Networking_rutos_manual_snmp_communities_snmpv6_community_configuration.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Community name</td>
<td>string; default: <b>none</b></td>
<td>Name of the community.</td>
</tr>
<tr>
<td>Source</td>
<td>ip6 | domain name; default: <b>default</b></td>
<td>Source of the community.</td>
</tr>
</tr>
<tr>
<tr>
[[File:Networking_rutos_manual_snmp_trap_settings_trap_rules_add_button.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_snmp_trap_settings_trap_rules_add_button.png|border|class=tlt-border]]
You should be redirected to the rule's configuration page which should look something like this:
You should be redirected to the rule's configuration page which should look something like this:
To avoid redundancy, screenshots for the other rules will not be provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar. Instead, only tables containing information on how to edit each rule will be provided.
To avoid redundancy, screenshots for the other rules will not be provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar. Instead, only tables containing information on how to edit each rule will be provided.
{{#ifeq: {{{mobile}}} | 1 |
====Signal strength====
====Signal strength====
----
----
<tr>
<tr>
<td>Enable</td>
<td>Enable</td>
<td>off | on; default: <b>on</b></td>
<td>off <nowiki>|</nowiki> on; default: <b>on</b></td>
<td>Enable or disable this rule.</td>
<td>Enable or disable this rule.</td>
</tr>
</tr>
<tr>
<tr>
<td>Enable</td>
<td>Enable</td>
<td>off | on; default: <b>on</b></td>
<td>off <nowiki>|</nowiki> on; default: <b>on</b></td>
<td>Enable or disable this rule.</td>
<td>Enable or disable this rule.</td>
</tr>
</tr>
</tr>
</tr>
</table>
</table>
<br>
<br>|}}
====Input/Output====
====Input/Output====
----
----
<tr>
<tr>
<th>field name</th>
<th>field name</th>
<th>value</th>
<th>value1</th>
<th>description</th>
<th>description</th>
</tr>
</tr>
<tr>
<tr>
<td>Input/Output name</td>
<td>Input/Output name</td>
<td>Input(3) {{!}} Output(4); default: <b>Input(3)</b></td>
<td>Output(4) {{!}} Input(3); default: <b>Output(4)</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
</tr>
<td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td>
<td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td>
<td>On which Input/Output state will this rule be triggered.</td>
<td>On which Input/Output state will this rule be triggered.</td>
</tr>}}
|RUT36X =
<tr>
<td>Input/Output type</td>
<td>Input/Output; default: <b>Input/Output</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
<tr>
<td>Input/Output name</td>
<td>Input(3) {{!}} Output(4); default: <b>Input(3)</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
<tr>
<td>State change</td>
<td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td>
<td>On which Input/Output state will this rule be triggered.</td>
</tr>
|RUT9 =
{{#ifeq:{{{name}}}|RUT955|
<tr>
<td>Input/Output type</td>
<td><span style="color:blue">Input/Output</span> {{!}} <span style="color:forestgreen"><b>Relay</b></span> {{!}} <span style="color:darkred"><b>4–20 mA Current Loop</b></span> {{!}} <span style="color:chocolate">ADC</span>; default: <b>Input/Output</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
<tr>
<td><span style="color:blue">Input/Output:</span> Input/Output name</td>
<td>Input (3) {{!}} Input (1) {{!}} Output(4) {{!}} Isolated Output (3,4,8) {{!}} Isolate Input (2,7); default: <b>Input (3)</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
<tr>
<td><span style="color:blue">Input/Output:</span> State change</td>
<td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td>
<td>On which Input/Output state will this rule be triggered.</td>
</tr>
<tr>
<td><span style="color:forestgreen">Relay:</span> Input/Output name</td>
<td>Relay(5,10); default: <b>Relay(5,10)</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
<tr>
<td><span style="color:forestgreen">Relay:</span> State change</td>
<td>Open {{!}} Closed {{!}} Both; default: <b>Open</b></td>
<td>On which Input/Output state will this rule be triggered.</td>
</tr>
<tr>
<td><span style="color:darkred">4–20 mA Current Loop:</span> Input/Output name</td>
<td>Analog Current Loop (6,9); default: <b>Analog Current Loop (6,9)</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
<tr>
<td><span style="color:darkred">4–20 mA Current Loop:</span> Voltage</td>
<td>positive float [0..40]; default: <b>none</b></td>
<td>At which voltage value will this rule be triggered.</td>
</tr>
</tr>
|RUT3 =
<tr>
<td><span style="color:chocolate">ADC:</span> Input/Output name</td>
<td>Analog Input (6,9); default: <b>Analog Input (6,9)</b></td>
<td>Which type of Inputs and Outputs to use in this rule.</td>
</tr>
<tr>
<td><span style="color:chocolate">ADC:</span> Voltage</td>
<td>positive float [0..40]; default: <b>none</b></td>
<td>At which voltage value will this rule be triggered.</td>
</tr>
|
<tr>
<tr>
<td>Input/Output type</td>
<td>Input/Output type</td>
</tr>
</tr>
<tr>
<tr>
<td>ModemImei.0</td>
<th>Device</th>
<th></th>
<th></th>
</tr>
<tr>
<td>serial</td>
<td>.1.3.6.1.4.1.48690.1.1.0</td>
<td>.1.3.6.1.4.1.48690.1.1.0</td>
<td>Modem IMEI</td>
<td>Device serial number</td>
</tr>
</tr>
<tr>
<tr>
<td>ModemModel.0</td>
<td>routerName.0</td>
<td>.1.3.6.1.4.1.48690.1.2.0</td>
<td>.1.3.6.1.4.1.48690.1.2.0</td>
<td>Modem model</td>
<td>Device name</td>
</tr>
</tr>
<tr>
<tr>
<td>ModemManufacturer.0</td>
<td>productCode</td>
<td>.1.3.6.1.4.1.48690.1.3.0</td>
<td>.1.3.6.1.4.1.48690.1.3.0</td>
<td>Modem manufacturer</td>
<td>Device product (ordering) code</td>
</tr>
</tr>
<tr>
<tr>
<td>ModemRevision.0</td>
<td>batchNumber</td>
<td>.1.3.6.1.4.1.48690.1.4.0</td>
<td>.1.3.6.1.4.1.48690.1.4.0</td>
<td>Modem revision</td>
<td>Device batch number</td>
</tr>
</tr>
<tr>
<tr>
<td>ModemSerial.0</td>
<td>hardwareRevision</td>
<td>.1.3.6.1.4.1.48690.1.5.0</td>
<td>.1.3.6.1.4.1.48690.1.5.0</td>
<td>Modem serial number</td>
<td>Device hardware revision</td>
</tr>
</tr>
<tr>
<tr>
<td>Imsi.0</td>
<td>fwVersion</td>
<td>.1.3.6.1.4.1.48690.1.6.0</td>
<td>.1.3.6.1.4.1.48690.1.6.0</td>
<td>Modem IMSI</td>
<td>Device RutOS firmware version</td>
</tr>
</tr>{{#ifeq: {{{mobile}}} | 1 |
<tr>
<tr>
<td>HardwareRevision.0</td>
<th>Mobile</th>
<td>.1.3.6.1.4.1.48690.1.10.0</td>
<th></th>
<td>Router's Hardware Revision number</td>
<th></th>
</tr>
</tr>
<tr>
<tr>
<td>SimState.0</td>
<td>modemNum</td>
<td>.1.3.6.1.4.1.48690.2.1.0</td>
<td>.1.3.6.1.4.1.48690.2.1.0</td>
<td>SIM card status</td>
<td>The number of modems (regardless of their current state) present on this system</td>
</tr>
</tr>
<tr>
<tr>
<td>PinState.0</td>
<td>mIndex</td>
<td>.1.3.6.1.4.1.48690.2.2.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.1.1</td>
<td>PIN status</td>
<td>Available modem indexes; used to index OIDs between when the device has multiple modems</td>
</tr>
</tr>
<tr>
<tr>
<td>NetState.0</td>
<td>mDescr</td>
<td>.1.3.6.1.4.1.48690.2.3.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.2.1</td>
<td>Mobile network registration status</td>
<td>Modem description</td>
</tr>
</tr>
<tr>
<tr>
<td>Signal.0</td>
<td>mImei</td>
<td>.1.3.6.1.4.1.48690.2.4.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.3.1</td>
<td>Signal strength level</td>
<td>Modem IMEI</td>
</tr>
</tr>
<tr>
<tr>
<td>Operator.0</td>
<td>mModel</td>
<td>.1.3.6.1.4.1.48690.2.5.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.4.1</td>
<td>Operator currently in use</td>
<td>Modem model</td>
</tr>
</tr>
<tr>
<tr>
<td>OperatorNumber.0</td>
<td>mManufacturer</td>
<td>.1.3.6.1.4.1.48690.2.6.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.5.1</td>
<td>Operator number (MCC+MNC)</td>
<td>Modem manufacturer</td>
</tr>
</tr>
<tr>
<tr>
<td>ConnectionState.0</td>
<td>mRevision</td>
<td>.1.3.6.1.4.1.48690.2.7.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.6.1</td>
<td>Data session connection state</td>
<td>Modem firmware version</td>
</tr>
</tr>
<tr>
<tr>
<td>ConnectionType.0</td>
<td>mSerial</td>
<td>.1.3.6.1.4.1.48690.2.8.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.7.1</td>
<td>Data session connection type</td>
<td>Modem serial number</td>
</tr>
</tr>
<tr>
<tr>
<td>Temperature.0</td>
<td>mIMSI</td>
<td>.1.3.6.1.4.1.48690.2.9.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.8.1</td>
<td>Modem's temperature in 0.1 degrees Celsius</td>
<td>Modem IMSI number</td>
</tr>
</tr>
<tr>
<tr>
<td>ReceivedToday.0</td>
<td>mSimState</td>
<td>.1.3.6.1.4.1.48690.2.10.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.9.1</td>
<td>Tee current day's RX packet count</td>
<td>SIM card status</td>
</tr>
</tr>
<tr>
<tr>
<td>SentToday.0</td>
<td>mPinState</td>
<td>.1.3.6.1.4.1.48690.2.11.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.10.1</td>
<td>The current day's TX packet count</td>
<td>PIN status</td>
</tr>
</tr>
<tr>
<tr>
<td>ReceivedYesterday.0</td>
<td>mNetState</td>
<td>.1.3.6.1.4.1.48690.2.12.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.11.1</td>
<td>Yesterday's RX packet count</td>
<td>Mobile network registration status</td>
</tr>
</tr>
<tr>
<tr>
<td>SentYesterday.0</td>
<td>mSignal</td>
<td>.1.3.6.1.4.1.48690.2.13.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.12.1</td>
<td>Yesterday's TX packet count</td>
<td>Signal strength level</td>
</tr>
</tr>
<tr>
<tr>
<td>FirmwareVersion.0</td>
<td>mOperator</td>
<td>.1.3.6.1.4.1.48690.2.14.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.13.1</td>
<td>Router's Firmware version</td>
<td>Current mobile network operator</td>
</tr>
</tr>
<tr>
<tr>
<td>SimSlot.0</td>
<td>mOperatorNumber</td>
<td>.1.3.6.1.4.1.48690.2.15.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.14.1</td>
<td>SIM slot currently in use</td>
<td>Mobile operator number (MCC+MNC)</td>
</tr>
</tr>
<tr>
<tr>
<td>RouterUptime.0</td>
<td>mConnectionState</td>
<td>.1.3.6.1.4.1.48690.2.16.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.15.1</td>
<td>Router up-time in seconds</td>
<td>Mobile data connection state</td>
</tr>
</tr>
<tr>
<tr>
<td>ConnectionUptime.0</td>
<td>mConnectionType</td>
<td>.1.3.6.1.4.1.48690.2.17.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.16.1</td>
<td>Mobile connection up-time in seconds</td>
<td>Mobile data connection type</td>
</tr>
</tr>
<tr>
<tr>
<td>MobileIP.0</td>
<td>mTemperature</td>
<td>.1.3.6.1.4.1.48690.2.18.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.17.1</td>
<td>Modem's temperature in 0.1 degrees Celsius</td>
<td>The amount of data sent through the mobile interface</td>
</tr>
</tr>
<tr>
<tr>
<td>CellID.0</td>
<td>mCellID</td>
<td>.1.3.6.1.4.1.48690.2.21.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.18.1</td>
<td>ID of the current mobile operator's cell </td>
<td>Cell (Base transceiver station) ID</td>
</tr>
</tr>
<tr>
<tr>
<td>SINR.0</td>
<td>mSINR</td>
<td>.1.3.6.1.4.1.48690.2.22.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.19.1</td>
<td>SINR value in dB</td>
<td>SINR value in dB</td>
</tr>
</tr>
<tr>
<tr>
<td>RSRP.0</td>
<td>mRSRP</td>
<td>.1.3.6.1.4.1.48690.2.23.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.20.1</td>
<td>RSRP value in dBm</td>
<td>RSRP value in dBm</td>
</tr>
</tr>
<tr>
<tr>
<td>RSRQ.0</td>
<td>mRSRQ</td>
<td>.1.3.6.1.4.1.48690.2.24.0</td>
<td>.1.3.6.1.4.1.48690.2.2.1.21.1</td>
<td>RSRQ value in dB</td>
<td>RSRQ value in dB</td>
</tr>
</tr>|}}{{#ifeq: {{{gps}}} | 1 |
<tr>
<tr>
<td>hotSpotId.0</td>
<th>GPS</th>
<td>.1.3.6.1.4.1.48690.3.4.1.0</td>
<th></th>
<td>Hotspot ID</td>
<th></th>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotSsid.0</td>
<td>latitude</td>
<td>.1.3.6.1.4.1.48690.3.4.2.0</td>
<td>.1.3.6.1.4.1.48690.3.1.0</td>
<td>Hotspot SSID</td>
<td>GPS Latitude value</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotEnableState.0</td>
<td>longitude</td>
<td>.1.3.6.1.4.1.48690.3.4.3.0</td>
<td>.1.3.6.1.4.1.48690.3.2.0</td>
<td>Hotspot status (enabled or disabled)</td>
<td>GPS Longitude value</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotIP.0</td>
<td>accuracy</td>
<td>.1.3.6.1.4.1.48690.3.4.4.0</td>
<td>.1.3.6.1.4.1.48690.3.3.0</td>
<td>Hotspot interface IP address</td>
<td>GPS coordinate accuracy</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotDownloadBandWidth.0</td>
<td>datetime</td>
<td>.1.3.6.1.4.1.48690.3.4.5.0</td>
<td>.1.3.6.1.4.1.48690.3.4.0</td>
<td>GPS coordinate fix time</td>
<td>Hotspot upload bandwidth</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotUsers.0</td>
<td>numSatellites</td>
<td>.1.3.6.1.4.1.48690.3.4.7.0</td>
<td>.1.3.6.1.4.1.48690.3.5.0</td>
<td>Hotspot users list</td>
<td>Number of available GPS satelites</td>
</tr>
</tr>|}}{{#ifeq: {{{hotspot}}} | 1 |
<tr>
<tr>
<td>hotSpotUsersPass.0</td>
<th>Hotspot</th>
<td>.1.3.6.1.4.1.48690.3.4.8.0 </td>
<th></th>
<td>Hotspot users password list </td>
<th></th>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotUsersActive.0</td>
<td>hsState</td>
<td>.1.3.6.1.4.1.48690.3.4.9.0</td>
<td>.1.3.6.1.4.1.48690.5.1.0</td>
<td>List of active Hotspot users</td>
<td>Current Hotspot state</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotUsersMac.0</td>
<td>hsIP</td>
<td>.1.3.6.1.4.1.48690.3.4.10.0</td>
<td>.1.3.6.1.4.1.48690.5.2.0</td>
<td>Hotspot users MAC address list</td>
<td>Hotspot IP address</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotUsersIp.0</td>
<td>hsNet</td>
<td>.1.3.6.1.4.1.48690.3.4.11.0</td>
<td>.1.3.6.1.4.1.48690.5.3.0</td>
<td>Hotspot users IP address list</td>
<td>WiFi interface ID</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotUsersStartTime.0</td>
<td>hsAuth</td>
<td>.1.3.6.1.4.1.48690.3.4.12.0</td>
<td>.1.3.6.1.4.1.48690.5.4.0</td>
<td>Hotspot users log in time list</td>
<td>Hotspot authentication type</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotUsersUseTime.0</td>
<td>hsSessionCount</td>
<td>.1.3.6.1.4.1.48690.3.4.13.0</td>
<td>.1.3.6.1.4.1.48690.5.5.0</td>
<td>Hotspot users log in up-time list</td>
<td>Hotspot current active session (connected user) count</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotUsersDownload</td>
<th>Hotspot Sessions</th>
<td>.0.1.3.6.1.4.1.48690.3.4.14.0</td>
<th></th>
<td>Hotspot users downloaded data count</td>
<th></th>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotUsersUpload.0</td>
<td>hssIndex</td>
<td>.1.3.6.1.4.1.48690.3.4.15.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.1.1</td>
<td>Hotspot users uploaded data count</td>
<td>Connected Hotspot user indexes</td>
</tr>
</tr>
<tr>
<tr>
<td>hotSpotEndTime.0</td>
<td>hssMAC</td>
<td>.1.3.6.1.4.1.48690.3.4.16.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.2.1</td>
<td>Hotspot</td>
<td>Hotspot user MAC addresses</td>
</tr>
</tr>
<tr>
<tr>
<td>DigitalInput.0</td>
<td>hssIP</td>
<td>.1.3.6.1.4.1.48690.5.1.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.3.1</td>
<td>Digital input state</td>
<td>Hotspot user local IP addresses</td>
</tr>
</tr>
<tr>
<tr>
<td>DigitalIsolatedInput.0</td>
<td>hssID</td>
<td>.1.3.6.1.4.1.48690.5.2.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.4.1</td>
<td>Digital isolated input state</td>
<td>Hotspot user session unique IDs</td>
</tr>
</tr>
<tr>
<tr>
<td>AnalogInput.0</td>
<td>hssUsername</td>
<td>.1.3.6.1.4.1.48690.5.3.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.5.1</td>
<td>Analog input state</td>
<td>Hotspot connected user usernames</td>
</tr>
</tr>
<tr>
<tr>
<td>DigitalOCOutput.0</td>
<td>hssState</td>
<td>.1.3.6.1.4.1.48690.5.4.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.6.1</td>
<td>Digital OC output state</td>
<td>Hotspot user session states</td>
</tr>
</tr>
<tr>
<tr>
<td>DigitalRelayOutput.0</td>
<td>hssDwLimit</td>
<td>.1.3.6.1.4.1.48690.5.5.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.7.1</td>
<td>Digital Relay output state</td>
<td>Hotspot user download limits</td>
</tr>
</tr>
<tr>
<tr>
<td>AnalogInputCalc.0</td>
<td>hssUpLimit</td>
<td>.1.3.6.1.4.1.48690.5.6.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.8.1</td>
<td>Analog input value</td>
<td>Hotspot user upload limits</td>
</tr>
</tr>
<tr>
<tr>
<td>Longtitude.0</td>
<td>hssTimeLimit</td>
<td>.1.3.6.1.4.1.48690.6.1.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.9.1</td>
<td>GPS Longitude value</td>
<td>Hotspot user session time limit</td>
</tr>
</tr>
<tr>
<tr>
<td>Latitude.0</td>
<td>hssIdleTimeout</td>
<td>.1.3.6.1.4.1.48690.6.2.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.10.1</td>
<td>GPS Latitude value</td>
<td>Hotspot user maximum idle timeout values</td>
</tr>
</tr>
<tr>
<tr>
<td>Accuracy.0</td>
<td>hssDwBandwidth</td>
<td>.1.3.6.1.4.1.48690.6.3.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.11.1</td>
<td>GPS coordinate accuracy</td>
<td>Hotspot user maximum download speed</td>
</tr>
</tr>
<tr>
<tr>
<td>Datetime.0</td>
<td>hssUpBandwidth</td>
<td>.1.3.6.1.4.1.48690.6.4.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.12.1</td>
<td>GPS coordinate fix time</td>
<td>Hotspot user maximum upload speed</td>
</tr>
</tr>
<tr>
<tr>
<td>NumSatellites.0</td>
<td>hssURL</td>
<td>.1.3.6.1.4.1.48690.6.5.0</td>
<td>.1.3.6.1.4.1.48690.5.6.1.13.1</td>
<td>Number of GPS satelites</td>
<td>Hotspot URL</td>
</tr>
</tr>|}}
</table>
</table>
[[Category:{{{name}}} Services section]]
[[Category:{{{name}}} Services section]]
