1,244
edits
Changes
Template:Networking rutos manual usb tools (view source)
Revision as of 14:10, 5 March 2021
, 14:10, 5 March 2021no edit summary
The '<b>Refresh</b>' is used to refresh the information in the Mounted File Systems list. If you attach a new USB device and cannot see it in the list, try clicking the 'Refresh' button.
The '<b>Refresh</b>' is used to refresh the information in the Mounted File Systems list. If you attach a new USB device and cannot see it in the list, try clicking the 'Refresh' button.
{{#ifeq:{{{printer}}}|0||
==Printer Server==
==Printer Server==
<tr>
<tr>
<td>Enable</td>
<td>Enable</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Turns USB printer support on or off.</td>
<td>Turns USB printer support on or off.</td>
</tr>
</tr>
<tr>
<tr>
<td>Bidirectional mode</td>
<td>Bidirectional mode</td>
<td>off | on; default: <b>on</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Turns bidirectional mode on or off.</td>
<td>Turns bidirectional mode on or off.</td>
</tr>
</tr>
For step-by-step instructions on how to use a printer with {{{name}}}, <b>[[How to set up a USB printer (Windows, {{{name}}})|click here]]</b>
For step-by-step instructions on how to use a printer with {{{name}}}, <b>[[How to set up a USB printer (Windows, {{{name}}})|click here]]</b>
}}{{#ifeq:{{{serial}}}|0||
==USB to Serial==
==USB to Serial==
<tr>
<tr>
<td>Enabled</td>
<td>Enabled</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Turns the USB to Serial service on or off.</td>
<td>Turns the USB to Serial service on or off.</td>
</tr>
</tr>
<tr>
<tr>
<td>Baud rate</td>
<td>Baud rate</td>
<td>300 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200; default: <b>115200</b></td>
<td>300 {{!}} 1200 {{!}} 2400 {{!}} 4800 {{!}} 9600 {{!}} 19200 {{!}} 38400 {{!}} 57600 {{!}} 115200; default: <b>115200</b></td>
<td>Data rate for serial data transmission (in bits per second).</td>
<td>Data rate for serial data transmission (in bits per second).</td>
</tr>
</tr>
<tr>
<tr>
<td>Data bits</td>
<td>Data bits</td>
<td>5 | 6 | 7 | 8; default: <b>8</b></td>
<td>5 {{!}} 6 {{!}} 7 {{!}} 8; default: <b>8</b></td>
<td>Number of data bits for each character</td>
<td>Number of data bits for each character</td>
</tr>
</tr>
<tr>
<tr>
<td>Parity</td>
<td>Parity</td>
<td>None | Odd | Even; default: <b>None</b></td>
<td>None {{!}} Odd {{!}} Even; default: <b>None</b></td>
<td>In serial transmission, parity is a method of detecting errors. An extra data bit is sent with each data character, arranged so that the number of 1 bits in each character, including the parity bit, is always odd or always even. If a byte is received with the wrong number of 1s, then it must have been corrupted. However, an even number of errors can pass the parity check.
<td>In serial transmission, parity is a method of detecting errors. An extra data bit is sent with each data character, arranged so that the number of 1 bits in each character, including the parity bit, is always odd or always even. If a byte is received with the wrong number of 1s, then it must have been corrupted. However, an even number of errors can pass the parity check.
<ul>
<ul>
<tr>
<tr>
<td>Stop bits</td>
<td>Stop bits</td>
<td>1 | 2; default: <b>1</b></td>
<td>1 {{!}} 2; default: <b>1</b></td>
<td>Stop bits sent at the end of every character allow the receiving signal hardware to detect the end of a character and to resynchronise with the character stream. Electronic devices usually use one stop bit. Two stop bits are required if slow electromechanical devices are used.</td>
<td>Stop bits sent at the end of every character allow the receiving signal hardware to detect the end of a character and to resynchronise with the character stream. Electronic devices usually use one stop bit. Two stop bits are required if slow electromechanical devices are used.</td>
</tr>
</tr>
<tr>
<tr>
<td>Flow control</td>
<td>Flow control</td>
<td>None | RTS/CTS | Xon/Xoff; default: <b>None</b></td>
<td>None {{!}} RTS/CTS {{!}} Xon/Xoff; default: <b>None</b></td>
<td>In many circumstances a transmitter might be able to send data faster than the receiver is able to process it. To cope with this, serial lines often incorporate a "handshaking" method, usually distinguished between hardware and software handshaking.
<td>In many circumstances a transmitter might be able to send data faster than the receiver is able to process it. To cope with this, serial lines often incorporate a "handshaking" method, usually distinguished between hardware and software handshaking.
<ul>
<ul>
<tr>
<tr>
<td>Protocol</td>
<td>Protocol</td>
<td>TCP | UDP; default: <b>TCP</b></td>
<td>TCP {{!}} UDP; default: <b>TCP</b></td>
<td>Protocol used in the communication process.</td>
<td>Protocol used in the communication process.</td>
</tr>
</tr>
<tr>
<tr>
<td>Mode</td>
<td>Mode</td>
<td><span style="color: purple;">Server</span> | <span style="color: red;">Client</span> | <span style="color: blue;">Bidirect</span>; default: <b>Server</b></td>
<td><span style="color: purple;">Server</span> {{!}} <span style="color: red;">Client</span> {{!}} <span style="color: blue;">Bidirect</span>; default: <b>Server</b></td>
<td>The role of this device in the serial connection:
<td>The role of this device in the serial connection:
<ul>
<ul>
<tr>
<tr>
<td>No leading zeros</td>
<td>No leading zeros</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>When checked, indicates that the first hex zeros should be skipped.</td>
<td>When checked, indicates that the first hex zeros should be skipped.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color: red;">Server settings</span>: Open port automatically</td>
<td><span style="color: red;">Server settings</span>: Open port automatically</td>
<td>off | on; default: <b>on</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Automatically adds a traffic rule in the firewall configuration to open the required port for NTRIP communication.</td>
<td>Automatically adds a traffic rule in the firewall configuration to open the required port for NTRIP communication.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color: purple;">Client settings</span>: Server Address</td>
<td><span style="color: purple;">Client settings</span>: Server Address</td>
<td>ip | host; default: <b>none</b></td>
<td>ip {{!}} host; default: <b>none</b></td>
<td>IP address or hostname of the server that this client will connect to.</td>
<td>IP address or hostname of the server that this client will connect to.</td>
</tr>
</tr>
<tr>
<tr>
<td>Echo</td>
<td>Echo</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Turn USB to serial echo on or off.</td>
<td>Turn USB to serial echo on or off.</td>
</tr>
</tr>
<tr>
<tr>
<td>Slave ID configuration type</td>
<td>Slave ID configuration type</td>
<td><span style="color: red;">User defined</span> | <span style="color: purple;">Obtained from TCP</span>;<br>default: <b><span style="color: red;">User defined</span></b></td>
<td><span style="color: red;">User defined</span> {{!}} <span style="color: purple;">Obtained from TCP</span>;<br>default: <b><span style="color: red;">User defined</span></b></td>
<td>Specifies whether slave IDs are user defined or automatically obtained from TCP.</td>
<td>Specifies whether slave IDs are user defined or automatically obtained from TCP.</td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color: red;">Slave ID</span> | <span style="color: purple;">Permitted slave IDs</span></td>
<td><span style="color: red;">Slave ID</span> {{!}} <span style="color: purple;">Permitted slave IDs</span></td>
<td><span style="color: red;">integer </span> | <span style="color: purple;">range of integers</span>;<br>default: <b><span style="color: red;">1</span> or <span style="color: purple;">1-247</span></b></td>
<td><span style="color: red;">integer </span> {{!}} <span style="color: purple;">range of integers</span>;<br>default: <b><span style="color: red;">1</span> or <span style="color: purple;">1-247</span></b></td>
<td>Specifies the slave ID of range of permitted slave IDs. The way this field is named and its function depends on the value of the ''Slave ID configuration'' field. <br> A range of IDs can be specified by placing a hyphen (<i>-</i>) between two integer numbers. For example, if you permit slave IDs in the range of 10 to 20, you would specify it as: <i>10-20</i><br>You can also specify multiple values that are not connected in a range using commas (<i>,</i>). For example, to specify 6, 50 and 100 as permitted slave IDs, you would have to use: <i>6,50,100</i></td>
<td>Specifies the slave ID of range of permitted slave IDs. The way this field is named and its function depends on the value of the ''Slave ID configuration'' field. <br> A range of IDs can be specified by placing a hyphen (<i>-</i>) between two integer numbers. For example, if you permit slave IDs in the range of 10 to 20, you would specify it as: <i>10-20</i><br>You can also specify multiple values that are not connected in a range using commas (<i>,</i>). For example, to specify 6, 50 and 100 as permitted slave IDs, you would have to use: <i>6,50,100</i></td>
</tr>
</tr>
<tr>
<tr>
<td>Open port automatically</td>
<td>Open port automatically</td>
<td>off | on; default: <b>on</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Automatically adds a traffic rule in the firewall configuration to open the required port for serial communication.<br><b><u>Caution:</u></b> use with care if listening IP is left as the default value (<i>0.0.0.0</i>). Leaving it as such will leave the device open for remote connections on the specified port.</td>
<td>Automatically adds a traffic rule in the firewall configuration to open the required port for serial communication.<br><b><u>Caution:</u></b> use with care if listening IP is left as the default value (<i>0.0.0.0</i>). Leaving it as such will leave the device open for remote connections on the specified port.</td>
</tr>
</tr>
<tr>
<tr>
<td>Echo</td>
<td>Echo</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Turn USB to serial echo on or off.</td>
<td>Turn USB to serial echo on or off.</td>
</tr>
</tr>
<tr>
<tr>
<td>Mount point</td>
<td>Mount point</td>
<td>filepath | string; default: <b>none</b></td>
<td>filepath {{!}} string; default: <b>none</b></td>
<td>NTRIP mount point.</td>
<td>NTRIP mount point.</td>
</tr>
</tr>
<tr>
<tr>
<td>Data format</td>
<td>Data format</td>
<td>NTRIP V2.0 TCP/IP | NTRIP V2.0 RSTP/RTP | NTRIP V1.0 | Automatic detection | NTRIP V2.0 UDP; default: <b>NTRIP V1.0</b></td>
<td>NTRIP V2.0 TCP/IP {{!}} NTRIP V2.0 RSTP/RTP {{!}} NTRIP V1.0 {{!}} Automatic detection {{!}} NTRIP V2.0 UDP; default: <b>NTRIP V1.0</b></td>
<td>Version of NTRIP protocol.</td>
<td>Version of NTRIP protocol.</td>
</tr>
</tr>
<tr>
<tr>
<td>Use device GPS</td>
<td>Use device GPS</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Allows to obtain default NMEA string from the router's GPS device. Only works if GPS service is enabled and location fix is obtained at the time of NTRIP service start.</td>
<td>Allows to obtain default NMEA string from the router's GPS device. Only works if GPS service is enabled and location fix is obtained at the time of NTRIP service start.</td>
</tr>
</tr>
<tr>
<tr>
<td>Open port automatically</td>
<td>Open port automatically</td>
<td>off | on; default: <b>on</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Automatically adds a traffic rule in the firewall configuration to open the required port for serial communication.</td>
<td>Automatically adds a traffic rule in the firewall configuration to open the required port for serial communication.</td>
</tr>
</tr>
<tr>
<tr>
<td>Echo</td>
<td>Echo</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Turn USB to serial echo on or off.</td>
<td>Turn USB to serial echo on or off.</td>
</tr>
</tr>
</table>
</table>
}}
==Storage Memory Expansion==
==Storage Memory Expansion==
<li>Your device's flash memory will be restored to normal once the reboot has finished. In order to check, log in to the WebUI and look to the 'System' widget in the 'Overview' page. Hover your mouse cursor over the 'FLASH' memory indicator; you should see your device's flash memory return to its regular size.<br>[[File:Networking_rutos_manual_storage_memory_expansion_disable_4.png|border|class=tlt-border]]</li>
<li>Your device's flash memory will be restored to normal once the reboot has finished. In order to check, log in to the WebUI and look to the 'System' widget in the 'Overview' page. Hover your mouse cursor over the 'FLASH' memory indicator; you should see your device's flash memory return to its regular size.<br>[[File:Networking_rutos_manual_storage_memory_expansion_disable_4.png|border|class=tlt-border]]</li>
</ol>
</ol>
{{#ifeq:{{{shares}}}|0||
==Network Shares==
==Network Shares==
<tr>
<tr>
<td>Enable</td>
<td>Enable</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Turns Samba on or off.</td>
<td>Turns Samba on or off.</td>
</tr>
</tr>
<tr>
<tr>
<td>Share home-directories</td>
<td>Share home-directories</td>
<td>off | on; default: <b>on</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Allows system users to reach their home directories via network shares.</td>
<td>Allows system users to reach their home directories via network shares.</td>
</tr>
</tr>
===Edit Template===
===Edit Template===
----
----
The <b>Edit Template</b> section is used to make modifications to the template that is used for generating the Samba configuration. This is the content of the <i>/etc/samba/smb.conf.template</i> file from which your Samba configuration will be generated. Values enclosed by pipe symbols ('|') should not be changed. They get their values from the 'General Settings' tab.
The <b>Edit Template</b> section is used to make modifications to the template that is used for generating the Samba configuration. This is the content of the <i>/etc/samba/smb.conf.template</i> file from which your Samba configuration will be generated. Values enclosed by pipe symbols ('{{!}}') should not be changed. They get their values from the 'General Settings' tab.
[[File:Networking_rutos_manual_usb_tools_network_shares_general_samba_edit_template.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_usb_tools_network_shares_general_samba_edit_template.png|border|class=tlt-border]]
<tr>
<tr>
<td>Read-only</td>
<td>Read-only</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Makes a Shared Directory read-only, which means the directory can only be accessed to view and read files (not write).</td>
<td>Makes a Shared Directory read-only, which means the directory can only be accessed to view and read files (not write).</td>
</tr>
</tr>
<tr>
<tr>
<td>Browseable</td>
<td>Browseable</td>
<td>off | on; default: <b>on</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Makes a Shared Directory browsable; i.e., visible in shared directory network discovery.</td>
<td>Makes a Shared Directory browsable; i.e., visible in shared directory network discovery.</td>
</tr>
</tr>
<tr>
<tr>
<td>Allow guests</td>
<td>Allow guests</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Turns guest access on or off. Guest access allows anonymous connections to a Shared Directory.</td>
<td>Turns guest access on or off. Guest access allows anonymous connections to a Shared Directory.</td>
</tr>
</tr>
[[File:Networking_rutos_manual_usb_tools_network_shares_users_user_settings.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_usb_tools_network_shares_users_user_settings.png|border|class=tlt-border]]
}}
[[Category:{{{name}}} Services section]]
[[Category:{{{name}}} Services section]]
