0
edits
Changes
Template:Networking rutos manual vpn (view source)
Revision as of 11:53, 2 July 2020
, 11:53, 2 July 2020add wireguard
<td>ip; default: <b>none</b></td>
<td>ip; default: <b>none</b></td>
<td>Assigns an IP address to the client that uses the adjacent authentication info. This field is optional and if left empty the client will simply receive an IP address from the IP pool defined above.</td>
<td>Assigns an IP address to the client that uses the adjacent authentication info. This field is optional and if left empty the client will simply receive an IP address from the IP pool defined above.</td>
</tr>
</table>
==WireGuard==
'''WireGuard''' is simple, fast, lean, and modern VPN that utilizes secure and trusted cryptography.
It intends to be more performant than OpenVPN. WireGuard is designed as general purpose VPN, fit for
many different circumstances and while it is currently under heavy development, it already
might be regarded as the most secure, easiest to use, and simplest VPN solution.
<u><b>Note:</b> WireGuard is additional software that can be installed from the <b>Services → [[{{{name}}} Package Manager|Package Manager]]</b> page.</u>
WireGuard works by adding an interface which acts as a tunnel. To create one enter its name and click the <b>Add</b> button.
To configure it click the <b>Edit</b> [[File:Networking_rutx_manual_edit_button_v1.png]] button.
[[File:Networking_rutx_vpn_wireguard_v1.png|border|class=tlt-border]]
===General Instance Settings===
----
This section contains General settings of created WireGuard Instance. Here you can find its Public and
Private keys and generate them, specify Port and IP addresses for communication.
[[File:Networking_rutx_vpn_wireguard_instance_general_v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Enable</td>
<td>off | on; default: <b>off</b></td>
<td>Turns WireGuard Instance on or off.</td>
</tr>
<tr>
<td>Private Key</td>
<td>string; default: <b>none</b></td>
<td>Private Key used in authentication.</td>
</tr>
<tr>
<td>Public Key</td>
<td>string; default: <b>-</b></td>
<td>Public Key used in authentication.</td>
</tr>
<tr>
<td>Generate</td>
<td>-(interactive button)</td>
<td>Click to generate Public Key and Private Key.</td>
</tr>
<tr>
<td>Listen Port</td>
<td>integer [0..65535]; default: <b>none</b></td>
<td>Specify port to listen for incomming connections. It will be set to a random integer if left empty.</td>
</tr>
<tr>
<td>IP Addresses</td>
<td>ip; default: <b>none</b></td>
<td>A single IP address or a list of them for this instance associated with public keys.</td>
</tr>
</table>
====Advanced Settings====
----
Advanced Settings section contains Metric and MTU configuration for this WireGuard interface.
[[File:Networking_rutx_vpn_wireguard_instance_advanced_v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Metric</td>
<td>positive integer; default: <b>none</b></td>
<td>Specify metric for this tunnel interface. Lower number means higher priority.</td>
</tr>
<tr>
<td>MTU</td>
<td>integer [1280..1420]; default: <b>none</b></td>
<td>Maximum Transmission Unit for this tunnel interface.</td>
</tr>
</table>
===Peers===
----
The Peers section is used to create and configure all the peers for this interface.
To create one enter its name and click the <b>Add</b> button.
To configure it click the <b>Edit</b> [[File:Networking_rutx_manual_edit_button_v1.png]] button.
[[File:Networking_rutx_vpn_wireguard_instance_peer_v2.png|border|class=tlt-border]]
====General Peer Settings====
----
In the General section of Peer instance you can configure basic information about the endpoint to allow communications.
[[File:Networking_rutx_vpn_wireguard_instance_peer_instance_general_v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Public Key</td>
<td>string; default: <b>none</b></td>
<td>Endpoint's Public Key.</td>
</tr>
<tr>
<td>Allowed IPs</td>
<td>ip; default: <b>none</b></td>
<td>A single IP address or a list of them which are allowed to communicate with this peer.</td>
</tr>
</table>
====Advanced Peer Settings====
----
In the Advanced section of Peer instance you are able to configure additional
settings such as its Description, Endpoint Host and Port, Preshared Key and other.
See more information below.
[[File:Networking_rutx_vpn_wireguard_instance_peer_instance_advanced_v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Description</td>
<td>string; default: <b>none</b></td>
<td>Description of this peer.</td>
</tr>
<tr>
<td>Pre-Shared Key</td>
<td>string; default: <b>none</b></td>
<td>Base64-encoded preshared key. Adds in an additional layer of symmetric-key cryptography for post-quantum resistance.</td>
</tr>
<tr>
<td>Route Allowed IPs</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Enable to create routes for <b>Allowed IPs</b> for this peer.</td>
</tr>
<tr>
<td>Endpoint Host</td>
<td>ip {{!}} url; default: <b>none</b></td>
<td>IP or URL of Remote Endpoint.</td>
</tr>
<tr>
<td>Endpoint Port</td>
<td>integer [0..65535]; default: <b>none</b></td>
<td>Specify port to connect to Remote Endpoint. It will be set to <b>51820</b> if left empty.</td>
</tr>
<tr>
<td>Persistent Keep Alive</td>
<td>integer [0..65535]; default: <b>none</b></td>
<td>Specify time amount in seconds between Keep Alive messages. By default this option is <b>0</b> which means it is disabled. Recommended value for a device behind NAT is 25.</td>
</tr>
</tr>
</table>
</table>
[[Category:{{{name}}} Services section]]
[[Category:{{{name}}} Services section]]
