Changes

</table>

</table>

==Check Internet connection==

==Check connection==

The <b>Check Internet connection</b> section is used to set the parameters that  

The <b>Check connection</b> section is used to set the parameters that  

define how the router will determine whether the Internet connection is still  

define how the router will determine whether the connection is still  

available or not. This is done by periodically sending ICMP packets from interface,  

available or not. This is done by periodically sending ICMP packets from interface,  

configured in [[#link|VRRP Configuration]] section, to a defined  

configured in [[#link|VRRP Configuration]] section, to a defined  

assumed by another router in the network.  

assumed by another router in the network.  

Refer to the figure and table below for information on the fields contained in the Check Internet connection section.

Refer to the figure and table below for information on the fields contained in the Check connection section.

[[File:Networking_rutos_manual_vrrp_vrrp_configuration_check_conn_v1.png|border|class=tlt-border]]

[[File:Networking_rutos_manual_vrrp_vrrp_configuration_check_conn_v2.png|border|class=tlt-border]]

<table class="nd-mantable">

<table class="nd-mantable">

       <td>Enable</td>

       <td>Enable</td>

       <td>yes | no; default: <b>no</b></td>

       <td>yes | no; default: <b>no</b></td>

       <td>Turns Internet connection checking on or off.</td>

       <td>Turns connection checking on or off.</td>

     </tr>

     </tr>

     <tr>

     <tr>

       <td>IP address or hostname</td>

       <td>IP address or hostname</td>

       <td>ip | host; default: <b>none</b></td>

       <td>ip | host; default: <b>none</b></td>

       <td>IP address or hostname to which the router will send ICMP packets. This is used to determine whether the Internet connection is still available or not. ICMP packets will be send from interface, configured in [[#link|VRRP Configuration]] section, therefore make sure you enter reachable IP address or hostname.</td>

       <td>IP address or hostname to which the router will send ICMP packets. This is used to determine whether the connection is still available or not. ICMP packets will be send from interface, configured in [[#link|VRRP Configuration]] section, therefore make sure you enter reachable IP address or hostname.</td>

     </tr>

     </tr>

     <tr>

     <tr>

     <td>Ping retry count</td>

     <td>Ping retry count</td>

         <td>integer; default: <b>5</b></td>

         <td>integer; default: <b>5</b></td>

         <td>How many times the router will retry sending ping requests before determining that the Internet connection has failed.</td>

         <td>How many times the router will retry sending ping requests before determining that the connection has failed.</td>

     </tr>

     </tr>

</table>

</table>