Changes

{{#switch:{{{series}}}

{{#switch:{{{series}}}

|TCR1 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tcr1_v2.png|border|class=tlt-border]]

|TCR1 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tcr1_v2.png|border|class=tlt-border]]

|#default = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_v2.png|border|class=tlt-border]]

|#default = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_v2.png|border|class=tlt-border]]

}}

}}

Many home networks utilize routers that by default run on channel 6 on the 2.4 GHz band. Neighboring WiFi home networks that run over the same channel generate radio interference that can cause significant network performance slowdowns for users. Reconfiguring a network to run on a different wireless channel helps minimize these slowdowns. Therefore, pick a channel with no other active Access Points and preferably one that has no active Access Point on two adjacent channels on each side as well. If you don't feel like doing this, set the 'Channel' field to <i>Auto</i> and the device will pick the least busy channel in your location automatically.  

Many home networks utilize routers that by default run on channel 6 on the 2.4 GHz band. Neighboring WiFi home networks that run over the same channel generate radio interference that can cause significant network performance slowdowns for users. Reconfiguring a network to run on a different wireless channel helps minimize these slowdowns. Therefore, pick a channel with no other active Access Points and preferably one that has no active Access Point on two adjacent channels on each side as well. If you don't feel like doing this, set the 'Channel' field to <i>Auto</i> and the device will pick the least busy channel in your location automatically.  

{{#switch:{{{series}}}

{{#switch:{{{series}}}

|TAP100 = [[File:Networking_rutos_manual_wireless_global_settings_general_setup__tap100_v2.png|border|class=tlt-border]]

|TAP100 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tap100_v2.png|border|class=tlt-border]]

|#default = [[File:Networking_rutos_manual_wireless_global_settings_general_setup_v2.png|border|class=tlt-border]]

|#default = [[File:Networking_rutos_manual_wireless_global_settings_general_setup_v2.png|border|class=tlt-border]]

}}

}}