1,223
edits
Changes
Template:Networking rutos manual wireless (view source)
Revision as of 13:42, 2 January 2024
, 2 Januaryno edit summary
{{Template: Networking_rutos_manual_fw_disclosure
{{Template: Networking_device_manual_fw_disclosure
| fw_version ={{Template: Networking_rutos_manual_latest_fw
| series = {{{series}}}
| name = {{{name}}}
| fw_version ={{Template: Networking_device_manual_latest_fw
| series = {{{series}}}
| series = {{{series}}}
| name = {{{name}}}
| name = {{{name}}}
}}
}}
}}
}}
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} Wireless (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_rutos_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} Wireless (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} Wireless (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_rutos_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>|}}
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} Wireless (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>|}}
__TOC__
__TOC__
==Summary==
==Summary==
The <b>Wireless</b> section of the Network tab can be used to manage and configure WiFi Access Points and WiFi Stations (clients) . This chapter of the user manual provides an overview of the Wireless section for {{{name}}} devices.
The <b>Wireless</b> section of the Network tab can be used to manage and configure WiFi Access Points and WiFi Stations (clients) . This chapter of the user manual provides an overview of the Wireless section for {{{name}}} devices.
{{#switch: {{{series}}} | TAP100 | TAP200= | #default= {{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
| series = {{{series}}}
| series = {{{series}}}
}}
}}}}
==Wireless technology==
==Wireless ==
{{#switch: {{{wifi}}}
{{#switch: {{{wifi}}}
}}
}}
==WiFi 2.4 GHz {{#ifeq:{{{wifi}}}|5|& 5 GHz|}}==
===SSIDS===
----
The <b>SSIDs</b> section is used to configure your wireless access points (AP) and wireless clients (STA).
{{#switch:{{{name}}}
|TCR100 = [[File:Networking_rutos_manual_wireless_wifi_5_tcr1_v4.png|border|class=tlt-border]]
|TAP100 = [[File:Networking_rutos_manual_wireless_wifi_tap100_v1.png|border|class=tlt-border]]
|TAP200 = [[File:Networking_rutos_manual_wireless_wifi_tap200_v1.png|border|class=tlt-border]]
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = [[File:Networking rutos manual wireless wifi 2 v4 mixed.png|border|class=tlt-border]]
|#default = [[File:Networking_rutos_manual_wireless_wifi_{{{wifi}}}_v4.png|border|class=tlt-border]]
}}
Above is the overview of the SSIDS Overview window. It displays active access points{{#switch:{{{series}}}|TAP100|TAP200=.|#default= and stations.}}
Here you can turn on or off your WiFi interfaces, remove them or start configuring by clicking on
Here you can turn on or off your WiFi interfaces, remove them or start configuring by clicking on
<b>Edit</b> button on the right side of interface.{{#switch:{{{series}}}|TAP100|TAP200=|#default= You can also configure your WiFi devices by clicking <b>Edit</b> button in the right side of each table header. To configure your Wireless device as Client press '''Scan''' button to scan the surrounding area and attempt to connect to a new wireless access point.}}
You can also configure your WiFi devices by clicking [[File:Networking rutx manual edit button v1.png]] <b>Edit</b> button
in the right side of each table header.
To configure your Wireless device as Client press '''Scan''' button to scan the surrounding area and attempt to connect to a new wireless access point.
{{#ifeq: {{{series}}} | TCR1 |
{{#ifeq: {{{series}}} | TCR1 |
====Guest Network====
Most of us are aware, that network security is extremely important. If your WiFi network is not properly secured, it makes you and all of your home or office resources vulnerable to a variety of security threats. To stay ahead of the curve, many companies and home users have guest WiFi. Unlike your regular WiFi network that you or your company members use, the guest WiFi network restricts what your guests can do in your network. It gives visitors access to the Internet connection, but nothing else making you or your company a lot more secure.
|}}
{{#switch:{{{series}}}|TAP100|TAP200= ===Radio Settings===|#default= ====Global Settings====}}
|
----
The <b>{{#switch:{{{series}}}|TAP100|TAP200=Radio|#default=Global}} Settings</b> section is used for configuring WiFi hardware parameters. You can find this section {{#switch:{{{series}}}|TAP100|TAP200=|#default=by clicking the 'Edit' button next to a wireless device (<u>not an interface</u>)}} in the Network → {{#switch:{{{series}}}|TAP100|TAP200=Wireless → Radio page.|#default=SSIDS page:}}
{{#switch:{{{name}}}
|TAP100 =
|TAP200 =
|TCR1 = [[File:Networking rutos manual wireless wifi 5 tcr1 v4.png|border|class=tlt-border]]
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = [[File:Networking rutos manual wireless wifi 2 v4 mixed.png|border|class=tlt-border]]
|#default = [[File:Networking_rutos_manual_wireless_wifi_{{{wifi}}}_v4.png|border|class=tlt-border]]
}}
}}
==Global Settings==
{{#switch:{{{series}}}|TAP100|TAP200= ====General Setup====|#default= =====General Setup=====}}
The <b>General Setup</b> section is used to turn a wireless device on or off, select the operating frequency (WiFi mode and channel), transmit power and define a country code.
The <b>General Setup</b> section is used to turn a wireless device on or off, select the operating frequency (WiFi mode and channel), transmit power and define a country code.
Many home networks utilize routers that by default run on channel 6 on the 2.4 GHz band. Neighboring WiFi home networks that run over the same channel generate radio interference that can cause significant network performance slowdowns for users. Reconfiguring a network to run on a different wireless channel helps minimize these slowdowns. Therefore, pick a channel with no other active Access Points and preferably one that has no active Access Point on two adjacent channels on each side as well. If you don't feel like doing this, set the 'Channel' field to <i>Auto</i> and the device will pick the least busy channel in your location automatically.
Many home networks utilize routers that by default run on channel 6 on the 2.4 GHz band. Neighboring WiFi home networks that run over the same channel generate radio interference that can cause significant network performance slowdowns for users. Reconfiguring a network to run on a different wireless channel helps minimize these slowdowns. Therefore, pick a channel with no other active Access Points and preferably one that has no active Access Point on two adjacent channels on each side as well. If you don't feel like doing this, set the 'Channel' field to <i>Auto</i> and the device will pick the least busy channel in your location automatically.
{{#switch:{{{series}}}
[[File:Networking_rutos_manual_wireless_global_settings_general_setup.png|border|class=tlt-border]]
|TAP100 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tap100_v3.png|border|class=tlt-border]]
|TAP200 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tap200_v1.png|border|class=tlt-border]]
|#default = [[File:Networking_rutos_manual_wireless_global_settings_general_setup_v3.png|border|class=tlt-border]]
}}
<table class="nd-mantable">
<table class="nd-mantable">
<tr>
<tr>
<td>Channel</td>
<td>Channel</td>
<td>Auto | 1 (2412 MHz) | 2 (2417 MHz) | 3 (2422 MHz) | 4 (2427 MHz) | 5 (2432 MHz) | 6 (2437 MHz) | 7 (2442 MHz) | 8 (2447 MHz) | 9 (2452 MHz) | 10 (2457 MHz) | 11 (2462 MHz); default: <b>11 (2462 MHz)</b></td>
<td>Auto | 1 (2412 MHz) | 2 (2417 MHz) | 3 (2422 MHz) | 4 (2427 MHz) | 5 (2432 MHz) | 6 (2437 MHz) | 7 (2442 MHz) | 8 (2447 MHz) | 9 (2452 MHz) | 10 (2457 MHz) | 11 (2462 MHz); default: <b>Auto</b></td>
<td>A wireless 2.4 GHz WiFi channel requires a signaling band roughly 22 MHz wide, radio frequencies of neighboring channels numbers significantly overlap each other. Therefore, pick a channel with no other active Access Points and preferably one that has no active Access Point on two adjacent channels on each side as well.</td>
<td>A wireless 2.4 GHz WiFi channel requires a signaling band roughly 22 MHz wide, radio frequencies of neighboring channels numbers significantly overlap each other. Therefore, pick a channel with no other active Access Points and preferably one that has no active Access Point on two adjacent channels on each side as well.</td>
</tr>
</tr>
<tr>
<tr>
<td>Transmit Power</td>
<td>Transmit Power</td>
<td>[5%...100%]; default: <b>100 %</b></td>
<td>[{{#switch:{{{series}}}|TAP100|TAP200=13%|#default=5%}}...100%]; default: <b>100 %</b></td>
<td>The transmit power of an access point radio is proportional to its effective range – the higher the transmit power, the more distance that a signal can travel, and/or the more physical materials that it can effectively penetrate and still have data successfully resolved at the receiver.</td>
<td>The transmit power of an access point radio is proportional to its effective range – the higher the transmit power, the more distance that a signal can travel, and/or the more physical materials that it can effectively penetrate and still have data successfully resolved at the receiver.</td>
</tr>
</tr>
<tr>
<tr>
<td>Country code</td>
<td>Country code</td>
<td>country code; default: <b>US - United States</b></td>
<td>country code; default: <b>{{#switch:{{{series}}}|TAP100|TAP200=00 - World|#default=US - United States}}</b></td>
<td>SO/IEC 3166 alpha2 country codes as defined in ISO 3166-1 standard.</td>
<td>SO/IEC 3166 alpha2 country codes as defined in ISO 3166-1 standard.</td>
</tr>
</tr>
</table>
</table>
===Advanced Settings===
{{#switch:{{{series}}}|TAP100|TAP200= ====Advanced Settings====|#default= =====Advanced Settings=====}}
The <b>Advanced Settings</b> section is used to configure how the wireless Access Point will work from a hardware perspective.
{{#switch:{{{series}}}
|TAP100|TAP200 = [[File:Networking_rutos_manual_wireless_global_settings_advanced_settings_tap100_v1.png|border|class=tlt-border]]
|#default =[[File:Networking_rutos_manual_wireless_global_settings_advanced_settings_v2.png|border|class=tlt-border]]
}}
<table class="nd-mantable">
<table class="nd-mantable">
<tr>
<tr>
<td>integer [15..65535]; default: <b>none</b></td>
<td>integer [15..65535]; default: <b>none</b></td>
<td>Beacon signal interval in seconds.</td>
<td>Beacon signal interval in seconds.</td>
</tr>
</tr>{{#ifeq:{{{wifi}}}|5|
{{#ifeq:{{{wifi}}}|5|
<tr>
<tr>
<th>Operating Frequency (5 GHz)</th>
<th>Operating Frequency (5 GHz)</th>
<td>off {{!}} on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Turn this option on to exclude DFS channels from automatic channel selection.</td>
<td>Turn this option on to exclude DFS channels from automatic channel selection.</td>
</tr>
</tr>|}}
|}}
</table>
</table>
===WiFi Scanner===
====Interface Configuration====
----
The <b>Interface Configuration</b> section is used to configure the parameters of Wireless Access Points{{#switch:{{{series}}}|TAP100|TAP200=|#default= or Clients}}. You can find this section by clicking the 'Edit' button next to a wireless device (<u>not an interface</u>) in the Network → SSIDs page:
{{#switch: {{{name}}}
|#default = [[File:Networking_rutos_manual_wireless_wifi_{{{wifi}}}_v4.png|border|class=tlt-border]]
|TCR100 = [[File:Networking rutos manual wireless wifi 5 tcr1 v4.png|border|class=tlt-border]]
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_edit_button_tap100_v4.png|border|class=tlt-border]]
|TAP200 = [[File:Networking_rutos_manual_wireless_wifi_tap200_v1.png|border|class=tlt-border]]
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = [[File:Networking rutos manual wireless wifi 2 v4 mixed.png|border|class=tlt-border]]
}}
=====General Setup=====
----
----
The <b>WiFi Scanner</b> provides you with the possibility to scan and collect information about connected devices and surrounding access points. The collected data is sent using the [[{{{name}}} Data to Server|Data to Server]] functionality with Kinesis argument.
The <b>General Setup</b> tab contains basic options for ESSID and network interface.
{{#switch: {{{series}}}
{{#switch: {{{series}}}
|#default = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_v3.png|border|class=tlt-border]]
|TCR1 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tcr1_v3.png|border|class=tlt-border]]
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tap100_v3.png|border|class=tlt-border]]
|TAP200 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tap200_v1.png|border|class=tlt-border]]
}}
}}
<table class="nd-mantable">
<table class="nd-mantable">
<tr>
<tr>
</tr>
</tr>
<tr>
<tr>
<td>Enable</td>
<td>Enable</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Enables or disables WiFi interface.</td>
</tr>{{#switch:{{{series}}}|TAP200=
<tr>
<td>Radios</td>
<td>2.4 GHz {{!}} 5GHz; default: <b>2.4 GHz</b></td>
<td>SSID will use these radios. Use one of them if you want seperate SSIDs for each radio or use all of them if you want combined SSID.</td>
</tr>|#default=}}{{#switch:{{{series}}}|TAP100|TAP200=|#default=
<tr>
<td>Mode</td>
<td>Client {{!}} Access Point {{!}} Mesh {{!}} Multi AP; default: <b>Access Point</b></td>
<td>Defines what role this interface will do, Access point to supply WiFi for other devices, Client to use other devices WiFi for WWAN and Mesh to act as mesh network gateway or a node in a mesh network.</td>
</tr>}}{{#switch:{{{series}}}|TAP100|TAP200=|#default=
<tr>
<th>Access Point mode</th>
<th></th>
<th></th>
</tr>}}
<tr>
<td>{{#switch:{{{series}}}|TAP100|TAP200=SSID|#default=ESSID}}</td>
<td>Factory {{#switch:{{{series}}}|TAP100|TAP200=SSID|#default=ESSID}} is different for every device; default: <b></b></td>
<td>{{#switch:{{{series}}}|TAP100|TAP200=Service Set Identifier.|#default=Extended Service Set Identifier is a name used to identify access point which is shown when client tries to connect to it.}}</td>
</tr>{{#switch:{{{series}}}|TAP200=
<tr>
<td>Chiper</td>
<td>Auto {{!}} Force CCMP (AES) {{!}} Force TKIP {{!}} Force TKIP and CCMP (AES); default: <b>Auto</b></td>
<td> An algorithm for performing encryption or decryption.</td>
</tr>|#default=}}
<tr>
<td>Password</td>
<td>string; default: <b>none</b></td>
<td>Custom passphrase used for authentication (at least 8 characters long).</td>
</tr>{{#switch:{{{series}}}|TAP100|TAP200=
<tr>
<td>Encryption</td>
<td>No encryption {{!}} WPA-PSK/WPA2-PSK Mixed Mode {{!}} WPA2-PSK {{!}} WPA2-EAP {{!}}
WPA2-EAP/WPA3-EAP Mixed Mode {{!}} WPA3-EAP {{!}} WPA2-PSK/WPA3-SAE Mixed Mode
{{!}} WPA3-SAE {{!}} OWE; default: <b>WPA2-PSK</b></td>
<td>The type of encryption used on this Wireless Interface.
Opportunistic Wireless Encryption (<b>OWE</b>) - no password is required and
all wireless traffic is encrypted (safer than <b>No Encryption</b>).</td>
</tr>
<tr>
<td>VLAN ID</td>
<td>integer [1..4094]; default: <b>Default</b></td>
<td>Choose default or define a network VLAN ID.</td>
</tr>|#default=}}{{#switch:{{{series}}}|TAP100|TAP200=|#default=
<tr>
<td>Network</td>
<td>network interfaces; default: <b>lan</b></td>
<td>Choose the network(s) you want to attach to this wireless interface or fill out the create field to define a new network.</td>
</tr>}}{{#switch:{{{series}}}|TAP100|TAP200=|#default=
<tr>
<td>Hide ESSID</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Hide extended Service Set Identifier.</td>
</tr>{{#ifeq:{{{series}}}|TCR1|
<tr>
<td>WPS</td>
<td>off {{!}} on; default: <b>on (2.4GHz) {{!}} off (5GHz)</b></td>
<td>Enable WPS push-button configuration method. It can only be enabled for a single wireless interface..</td>
</tr>|}}}}
<tr>
<td>802.11r Fast Transition</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Enables fast roaming among access points that belong to the same Mobility Domain </td>
</tr>{{#switch:{{{series}}}|TAP100|TAP200=|#default=
<tr>
<th>Client mode</th>
<th></th>
<th></th>
</tr>
<tr>
<td>ESSID</td>
<td>Factory ESSID is different for every device; default: <b></b></td>
<td>Extended Service Set Identifier is a name used to identify access point to which client will connect.</td>
</tr>
<tr>
<td>BSSID</td>
<td>mac address; default: <b>none</b></td>
<td>Basic service set identifier.</td>
</tr>
<tr>
<td>Password</td>
<td>string; default: <b>none</b></td>
<td>Custom passphrase used for authentication (at least 8 characters long).</td>
</tr>
<tr>
<td>Network</td>
<td>network interfaces; default: <b>Auto</b></td>
<td>Choose the network you want to attach to this wireless interface or fill out the Custom field to define a new network (you will be redirected to the newly created network configuration page).</td>
</tr>}}{{#switch:{{{series}}}|TAP100|TAP200=|#default=
<tr>
<th>Mesh mode</th>
<th></th>
<th></th>
</tr>
<tr>
<td>Mesh ID</td>
<td>integer; default: <b>none</b></td>
<td>Mesh network identifier.</td>
</tr>
<tr>
<td>Password</td>
<td>string; default: <b>none</b></td>
<td>Custom passphrase used for authentication (at least 8 characters long).</td>
</tr>
<tr>
<td>Network</td>
<td>network interfaces; default: <b>Auto</b></td>
<td>Choose the network you want to attach to this wireless interface or fill out the Custom field to define a new network (you will be redirected to the newly created network configuration page).</td>
</tr>}}{{#switch:{{{series}}}|TAP100|TAP200=|#default=
<tr>
<th>Multi AP</th>
<th></th>
<th></th>
</tr>
<tr>
<td>Network</td>
<td>network interfaces; default: <b>Auto</b></td>
<td>Choose the network you want to attach to this wireless interface or fill out the Custom field to define a new network (you will be redirected to the newly created network configuration page).</td>
</tr>
</tr>
<tr>
<tr>
<td>Scan time (sec)</td>
<td>number; default: <b>60</b></td>
<td>Time between scans of available access points (minimum 30 sec.)</td>
</tr>
</tr>
<tr>
<td>Upload AP list</td>
<td>- (interactive button)</td>
<td>Uploads a list of access point configurations.</td>
</tr>}}
</table>
</table>
==Interface Configuration==
=====Additional Settings=====
===General Setup===
----
----
[[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_{{#ifeq:{{{series}}}|TCR1|tcr1_|}}v1.png|border|class=tlt-border]]
[[File:Networking rutos manual wireless interface configuration additional settings access point v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<tr>
<tr>
<th>Field</th>
<th>Field</th>
<th>Value</th>
<th>Value</th>
<th>Description</th>
<th>Description</th>
</tr>
<tr>
<th>Access point</th>
<th></th>
<th></th>
</tr>
<tr>
<td>Hide SSID</td>
<td>on {{!}} off; default: <b>off</b></td>
<td>Hide Service Set Identifier </td>
</tr>
<tr>
<td>Isolate Clients</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Prevents client to client communication on the same subnet.</td>
</tr>
<tr>
<td>802.11v BSS Transition Management</td>
<td>on {{!}} off; default: <b>off</b></td>
<td>A suggestion (or advice) given to a client, which the client can choose to follow or ignore</td>
</tr>
</tr>
<tr>
<tr>
<td>Mode</td>
<td>802.11k Radio Resource Measurement</td>
<td>Access Point | Client; default: <b>Access Point</b></td>
<td>on {{!}} off; default: <b>off</b></td>
<td>Defines what role this interface will do, Access point to supply WiFi for other devices, or as Client to use other devices WiFi for WWAN.</td>
<td>Helps devices search quickly for nearby APs that are available as roaming targets by creating an optimized list of channels.</td>
</tr>
</tr>
<tr>
<tr>
<td>ESSID</td>
<td>Disassociate On Low Acknowledgement</td>
<td>Factory ESSID is different for every device; default: <b>none</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Extended Service Set Identifier.</td>
<td>Allow AP mode to disconnect stations/clients based on low Acknowledgement condition.</td>
</tr>
</tr>
</table>
{{#switch:{{{series}}}|TAP100|TAP200=|#default=
----
[[File:Networking rutos manual wireless interface configuration additional settings client multi ap v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<tr>
<td>Network</td>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
</tr>
<tr>
<tr>
<th>Access Point mode</th>
<th>Client & Multi AP</th>
<th></th>
<th></th>
<th></th>
<th></th>
</tr>
</tr>
<tr>
<tr>
<td>ESSID</td>
<td>Disassociate On Low Acknowledgement</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Hide extended Service Set Identifier.</td>
<td>Allow AP mode to disconnect stations/clients based on low Acknowledgement condition.</td>
</tr>
</tr>
<tr>
<tr>
<td>WMM Mode</td>
<td>Enable fast roaming</td>
<td>off | on; default: <b>on</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Wi-Fi Multimedia (WMM), previously known as Wireless Multimedia Extensions (WME), is a subset of the 802.11e wireless LAN (WLAN) specification that enhances quality of service (QoS) on a network by prioritizing data packets according to four categories.</td>
<td>Requests background scans for the purpose of roaming within an ESS.</td>
</tr>{{#ifeq:{{{series}}}|TCR1|
</tr>
</table>
----
[[File:Networking rutos manual wireless interface configuration mesh additional settings v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<tr>
<td>WPS</td>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>|}}
</tr>
<tr>
<tr>
<th>Client mode</th>
<th>Mesh</th>
<th></th>
<th></th>
<th></th>
<th></th>
</tr>
</tr>
<tr>
<tr>
<td>BSSID</td>
<td>Forward mesh peer traffic </td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Basic service set identifier.</td>
<td>Enables mesh peer traffic forwarding.</td>
</tr>
<tr>
<td>RSSI threshold for joining </td>
<td>integer [0..1]; default: <b>0</b></td>
<td>0 = not using RSSI threshold, 1 = do not change driver default.</td>
</tr>
<tr>
<td>Enable fast roaming</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Requests background scans for the purpose of roaming within an ESS.</td>
</tr>
<tr>
<td>Disassociate On Low Acknowledgement</td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Allow AP mode to disconnect stations/clients based on low Acknowledgement condition.</td>
</tr>
</tr>
</table>
</table>}}
===Wireless Security===
{{#switch:{{{series}}}|TAP100|TAP200=|#default= =====Wireless Security=====
----
----
The <b>Wireless Security</b> tab is used to determine what kind of encryption your WLAN will use.
The <b>Wireless Security</b> tab is used to determine what kind of encryption your WLAN will use.
[[File:Networking_rutos_manual_wireless_interface_configuration_wireless_security.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_wireless_interface_configuration_wireless_security_v3.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<tr>
<tr>
<td>Encryption</td>
<td>Encryption</td>
<td>No encryption | WPA-PSK/WPA2-PSK Mixed Mode | WPA2-PSK | WPA2-EAP |
WPA2-EAP/WPA3-EAP Mixed Mode | WPA3-EAP | WPA2-PSK/WPA3-SAE Mixed Mode
<td>No encryption {{!}} WPA-PSK {{!}} WPA2-PSK {{!}} WPA-PSK/WPA2-PSK Mixed Mode {{!}} WPA3-SAE {{!}} WPA2-PSK/WPA3-SAE Mixed Mode
| WPA3-SAE | OWE; default: <b>WPA2-PSK</b></td>
{{!}} WPA-EAP {{!}} WPA2-EAP {{!}} OWE {{#switch:{{{name}}}|RUT241|RUT200|RUT951|RUT956|RUT906 =
|#default = {{!}} WPA2-EAP/WPA3-EAP Mixed Mode {{!}} WPA3-EAP}}; default: {{#switch:{{{name}}}
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = <b>WPA2-PSK/WPA3-SAE Mixed Mode</b>
|#default = <b>WPA2-PSK</b>
}}</td>
<td>The type of encryption used on this Wireless Interface.
<td>The type of encryption used on this Wireless Interface.
Opportunistic Wireless Encryption (<b>OWE</b>) - no password is required and
Opportunistic Wireless Encryption (<b>OWE</b>) - no password is required and
<tr>
<tr>
<td>Cipher</td>
<td>Cipher</td>
<td>Auto | Force CCMP (AES) | Force TKIP | Force TKIP and CCMP (AES); default: <b>Force TKIP and CCMP (AES)</b></td>
<td>Auto {{!}} Force CCMP (AES) {{!}} Force TKIP {{!}} Force TKIP and CCMP (AES); default: <b>Auto</b></td>
<td>An algorithm for performing encryption or decryption.</td>
<td>An algorithm for performing encryption or decryption.</td>
</tr>
</tr>
<tr>
<tr>
<th>WPA-PSK/WPA2-PSK Mixed Mode, WPA2-PSK, WPA2-PSK/WPA3-SAE Mixed Mode, WPA3-SAE</th>
<th>WPA3-SAE, WPA2-PSK/WPA3-SAE Mixed Mode</th>
<th></th>
<th></th>
<th></th>
<th></th>
<tr>
<tr>
<td>Password</td>
<td>Password</td>
<td>string; default: <b>random</b> </td>
<td>string; default: <b>none</b> </td>
<td>A custom passphrase used for authentication (at least 8 characters long).</td>
<td>A custom passphrase used for authentication (at least 8 characters long).</td>
</tr>
</tr>
<tr>
<tr>
<th>WPA2-EAP, WPA2-EAP/WPA3-EAP Mixed Mode, WPA3-EAP</th>
<th>WPA-EAP, WPA2-EAP, WPA2-EAP/WPA3-EAP Mixed Mode, WPA3-EAP</th>
<th></th>
<th></th>
<th></th>
<th></th>
<td>Network access server identifier.</td>
<td>Network access server identifier.</td>
</tr>
</tr>
</table>}}
</table>
===MAC Filter===
=====MAC Filter=====
----
----
The <b>MAC Filter</b> tab is used for setting up rules that allow or exclude devices with specified MAC addresses from connecting to your WiFi network.
The <b>MAC Filter</b> tab is used for setting up rules that allow or exclude devices with specified MAC addresses from connecting to your WiFi network.
This tab is only visible when Wireless interface Mode is set to <b>Access Point</b>.
This tab is only visible when Wireless interface Mode is set to <b>Access Point</b>.
{{#switch:{{{series}}}
[[File:Networking_rutos_manual_wireless_interface_configuration_mac_filter.png|border|class=tlt-border]]
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_mac_filter_tap100_v1.png|border|class=tlt-border]]
|#default = [[File:Networking_rutos_manual_wireless_interface_configuration_mac_filter_v3.png|border|class=tlt-border]]}}
<table class="nd-mantable">
<table class="nd-mantable">
<tr>
<tr>
<td>MAC-address filter</td>
<td>MAC-address filter</td>
<td>Disable | Allow listed only | Allow all except listed; default: <b>Disable</b></td>
<td>Disable {{!}} Allow listed only {{!}} Allow all except listed; default: <b>Disable</b></td>
<td>Defines how the MAC Filter should function.<br>
<td>Defines how the MAC Filter should function.<br>
<ul>
<ul>
<li><b>Allow listed only</b> – only allows devices with specified MAC addresses to connect to your Wireless Access Point.</li>
<li><b><span style="color: red;">Allow listed only</span></b> – only allows devices with specified MAC addresses to connect to your Wireless Access Point.</li>
<li><b>Allow all except listed</b> - blocks devices with specified MAC addresses from connecting to your Wireless Access Point.</li>
<li><b>Allow all except listed</b> - blocks devices with specified MAC addresses from connecting to your Wireless Access Point.</li>
<ul>
</ul>
</td>
</td>
</tr>
</tr>
<td>MAC; default: <b>none</b> </td>
<td>MAC; default: <b>none</b> </td>
<td>List of MAC addresses to be included or excluded from connecting to your Wireless Access Point.</td>
<td>List of MAC addresses to be included or excluded from connecting to your Wireless Access Point.</td>
</tr>
<tr>
<td><span style="color: red;">Remove from whitelist</span></td>
<td>off {{!}} on; default: <b>off</b> </td>
<td>Enables MAC removal from whitelist when device reaches IP block counter. </td>
</tr>
</tr>
</table>
</table>
===Advanced Settings===
=====Advanced Settings=====
----
----
[[File:Networking_rutos_manual_wireless_interface_configuration_advanced_settings.png|border|class=tlt-border]]
{{#switch:{{{series}}}
|TAP100 = [[File:Networking rutos manual wireless interface configuration advanced settings tap100_v1.png|border|class=tlt-border]]
|TAP200 = [[File:Networking rutos manual wireless interface configuration advanced settings tap200_v1.png|border|class=tlt-border]]
|#default = [[File:Networking rutos manual wireless interface configuration advanced settings access_point_v1.png|border|class=tlt-border]]}}
<table class="nd-mantable">
<table class="nd-mantable">
</tr>
</tr>
<tr>
<tr>
<td>Isolate Clients</td>
<th>Access point</th>
<td>off | on; default: <b>off</b></td>
<th></th>
<td>Prevents client to client communication on the same subnet.</td>
<th></th>
</tr>
<tr>
<td>Short Preamble</td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Uses Short Preamble, it uses shorter data strings that adds less data to transmit the error redundancy check which means that it is much faster.</td>
</tr>
<tr>
<td>DTIM interval</td>
<td>seconds; default: <b>none</b> </td>
<td>Delivery Traffic Indication Message Interval.</td>
</tr>
<tr>
<td>Time interval for rekeying GTK</td>
<td>seconds; default: <b>none</b> </td>
<td>Period of time in between automatic changes of the group key, which all devices on the network share.</td>
</tr>
<tr>
<td>Disable Inactivity Polling</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Inactivity polling can be disabled to disconnect stations based on inactivity timeout so that idle stations are more likely to be disconnected even if they are still in range of the AP.</td>
</tr>
<tr>
<td>Station inactivity limit</td>
<td>seconds; default: <b>none</b> </td>
<td>Station inactivity limit in seconds. If a station/client does not send anything in st time frame, an empty data frame is sent to it in order to verify whether it is still in range. If this frame is not acknowledged, the station will be disassociated and then deauthenticated.</td>
</tr>
<tr>
<td>Maximum allowed Listen Interval</td>
<td>positive integer; default: <b>none</b> </td>
<td>Association will be refused if a client/station attempts to associate with a listen interval greater than this value.</td>
</tr>{{#switch:{{{series}}}|TAP100|TAP200=|#default=
<tr>
<td>WDS</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>A Wireless Distribution System (WDS) is a system that enables the wireless interconnection of access points (APs) in a network</td>
</tr>}}
<tr>
<td>WMM Mode</td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Wi-Fi Multimedia (WMM), previously known as Wireless Multimedia Extensions (WME), is a subset of the 802.11e wireless LAN (WLAN) specification that enhances quality of service (QoS) on a network by prioritizing data packets according to four categories. </td>
</tr>{{#switch:{{{series}}}|TAP100|TAP200=
<tr>
<td>Hide SSID</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Hide Service Set Identifier.</td>
</tr>|#default=}}
</table>
{{#switch:{{{series}}}|TAP100|TAP200 =
|#default = [[File:Networking rutos manual wireless interface configuration advanced settings client_multi_ap_v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<th>Client & Multi AP</th>
<th></th>
<th></th>
</tr>
<tr>
<td>Short Preamble</td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Uses Short Preamble, it uses shorter data strings that adds less data to transmit the error redundancy check which means that it is much faster.</td>
</tr>
<tr>
<td>DTIM interval</td>
<td>seconds; default: <b>none</b> </td>
<td>Delivery Traffic Indication Message Interval.</td>
</tr>
<tr>
<td>Time interval for rekeying GTK</td>
<td>seconds; default: <b>none</b> </td>
<td>Period of time in between automatic changes of the group key, which all devices on the network share.</td>
</tr>
<tr>
<td>Disable Inactivity Polling</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Inactivity polling can be disabled to disconnect stations based on inactivity timeout so that idle stations are more likely to be disconnected even if they are still in range of the AP.</td>
</tr>
<tr>
<td>Station inactivity limit</td>
<td>seconds; default: <b>none</b> </td>
<td>Station inactivity limit in seconds. If a station/client does not send anything in st time frame, an empty data frame is sent to it in order to verify whether it is still in range. If this frame is not acknowledged, the station will be disassociated and then deauthenticated.</td>
</tr>
<tr>
<td>Maximum allowed Listen Interval</td>
<td>positive integer; default: <b>none</b> </td>
<td>Association will be refused if a client/station attempts to associate with a listen interval greater than this value.</td>
</tr>
<tr>
<td>Disassociate On Low Acknowledgement</td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Allow AP mode to disconnect stations/clients based on low Acknowledgement condition.</td>
</tr>
<tr>
<td>WDS</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>A Wireless Distribution System (WDS) is a system that enables the wireless interconnection of access points (APs) in a network</td>
</tr>
<tr>
<td>Enable fast roaming</td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Requests background scans for the purpose of roaming within an ESS.</td>
</tr>
</table>}}
{{#switch:{{{series}}}|TAP100|TAP200 =
|#default = [[File:Networking rutos manual wireless interface configuration mesh advanced settings v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<th>Mesh</th>
<th></th>
<th></th>
</tr>
<tr>
<td>Forward mesh peer traffic</td>
<td>off {{!}} on; default: <b>off</b></td>
<td></td>
</tr>
<tr>
<td>RSSI threshold for joining</td>
<td>number; default: <b>none</b> </td>
<td>0 = not using RSSI threshold, 1 = do not change driver default.</td>
</tr>
</tr>
<tr>
<tr>
<td>Short Preamble</td>
<td>Short Preamble</td>
<td>off | on; default: <b>on</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Uses Short Preamble, it uses shorter data strings that adds less data to transmit the error redundancy check which means that it is much faster.</td>
<td>Uses Short Preamble, it uses shorter data strings that adds less data to transmit the error redundancy check which means that it is much faster.</td>
</tr>
</tr>
<tr>
<tr>
<td>Disable Inactivity Polling</td>
<td>Disable Inactivity Polling</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Inactivity polling can be disabled to disconnect stations based on inactivity timeout so that idle stations are more likely to be disconnected even if they are still in range of the AP.</td>
<td>Inactivity polling can be disabled to disconnect stations based on inactivity timeout so that idle stations are more likely to be disconnected even if they are still in range of the AP.</td>
</tr>
</tr>
<tr>
<tr>
<td>Disassociate On Low Acknowledgement</td>
<td>Disassociate On Low Acknowledgement</td>
<td>off | on; default: <b>on</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Allow AP mode to disconnect stations/clients based on low Acknowledgement condition.</td>
<td>Allow AP mode to disconnect stations/clients based on low Acknowledgement condition.</td>
</tr>
</tr>
</table>
<tr>
<td>WDS</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>A Wireless Distribution System (WDS) is a system that enables the wireless interconnection of access points (APs) in a network</td>
</tr>
</table>}}
=====Fast Transition=====
----
The <b>Fast Transition</b> tab is only available when in <b>General setup</b> section <b>802.11r Fast Transition</b> option is enabled.
[[File:Networking rutos manual wireless interface configuration fast transition settings_v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>NAS id</td>
<td>string; default: <b>empty</b></td>
<td>Used for fast transition and Radius server.</td>
</tr>
<tr>
<td>Mobility Domain</td>
<td>HEX string; default: <b>empty</b></td>
<td>4-character hexadecimal ID</td>
</tr>
<tr>
<td>Reassociation Deadline </td>
<td>integer [1000..65535]; default: <b>empty</b></td>
<td>Time units (TUs / 1.024 ms) </td>
</tr>
<tr>
<td>FT protocol</td>
<td>FT over DS {{!}} FT over Air; default: <b>FT over DS</b></td>
<td>Defines how nagotiation will happen using Fast Transition protocol.</td>
</tr>
</table>
{{#switch:{{{series}}}|TAP100|TAP200=|#default= =====Fast Roaming=====
----
The <b>Fast Roaming</b> tab is only available when in <b>General setup</b> section <b>Client</b> mode is selected and in <b>Advanced settings</b> tab <b>Enable fast roaming</b> option is enabled.
[[File:Networking rutos manual wireless interface configuration fast roaming settings_v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Mode</td>
<td>Simple {{!}} Learn; default: <b>Simple</b></td>
<td>Defines how the MAC Filter should function.<br>
<ul>
<li><b>Simple:</b> Periodic background scans based on signal strengt</li>
<li><b>Learn:</b> Learns channels used by the network and tries to avoid scans on other channels</li>
</ul>
</td>
</tr>
<tr>
<td>Short interval</td>
<td>integer [5..86400]; default: <b>30</b></td>
<td>Defines the interval between background scans (in seconds) if the actual signal level of the currently connected access point is worse than signal threshold </td>
</tr>
<tr>
<td>Long interval</td>
<td>integer [5..86400]; default: <b>300</b></td>
<td>Defines the interval between background scans (in seconds) if the actual signal level of the currently connected access point is better than signal threshold</td>
</tr>
<tr>
<td>Signal threshold</td>
<td>integer [-90..-30]; default: <b>-70</b></td>
<td>Defines a threshold (in dBm) that determines if short interval or longer interval will be used</td>
</tr>
</table>}}
==Client Mode==
{{#switch:{{{series}}}|TAP100|TAP200=|#default=
===Configuration examples===
----
====Client Mode====
{{{name}}} can also work as a WiFi client. Configuring client mode is nearly identical to Access Point, except for the fact that most of the options are dictated by the WiFi Access Point that the router is connecting to. Changing them can result in an interrupted connection to that router.
{{{name}}} can also work as a WiFi client. Configuring client mode is nearly identical to Access Point, except for the fact that most of the options are dictated by the WiFi Access Point that the router is connecting to. Changing them can result in an interrupted connection to that router.
To begin configuring WiFi Client first click the 'Scan' button to scan the surrounding area and attempt to connect to a new wireless access point.
To begin configuring WiFi Client first click the 'Scan' button to scan the surrounding area and attempt to connect to a new wireless access point.
[[File:Networking_rutos_manual_wireless_scan_button_wifi_{{{wifi}}}_{{#ifeq:{{{series}}}|TCR1|tcr1_|}}v1.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_wireless_scan_button_v1.png|border|class=tlt-border]]
After which you will be redirected to the window shown below, where you will see list of available WiFi Access Points in the area. Choose one according to your liking and press the '''Join Network''' button next to it.
After which you will be redirected to the window shown below, where you will see list of available WiFi Access Points in the area. Choose one according to your liking and press the '''Join Network''' button next to it.
[[File:Networking_rutos_manual_wireless_scan_button_results.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_wireless_scan_button_results_v2.png|border|class=tlt-border]]
You again will be redirected to following window, where you will need to enter WPA passphrase.
[[File:Networking_rutos_manual_wireless_scan_button_results_join_network_v2.png|border|class=tlt-border]]
Next window that opens will be '''Device Configuration'''. Values there, mostly, should be left unchanged to avoid connection problems, because they are dictated by Access Point. Other than that, only difference from Access Point settings are in ''Interface Configuration → General Setup'' section, where '''Mode''' is set to '''Client''', and '''Network''' attached to this wireless interface is '''wifi1''' instead of LAN
[[File:Networking_rutos_manual_wireless_scan_button_results_join_network_general_setup_v4.png|border|class=tlt-border]]
Click '''Save & Apply''' and if you configured correctly, you will have Wireless Client working.
====Mesh Mode====
{{{name}}} can also be configured as a mesh gateway or as a node (router) connecting to a mesh gateway.
When {{{name}}} is configured as '''mesh gateway''' it provides internet access to other mesh nodes. When configured as '''mesh node''' it acts as a mesh router which forwards traffic to and from mesh gateway. Nodes also connect other wireless devices to the network such as laptops and cellphones.
For complete wireless mesh network example please visit [[Wireless_Mesh_configuration_example|Wireless Mesh configuration example]].
=====Mesh Gateway=====
When configuring {{{name}}} as a '''mesh gateway''' internet connectivity is '''required'''.
To begin click the 'Add' button below of wireless interface in the Network → Wireless page:
[[File:Networking rutos manual wireless mesh gateway add button v5.png|border|class=tlt-border]]
In '''General Setup''' tab change '''Mode''' to '''Mesh''', set '''Mesh ID''' (this number has to be the same in all nodes that connect to this wireless mesh network) and select desired '''Network''' which will be attached to the interface. Click '''Save & Apply'''.
[[File:Networking rutos manual wireless mesh gateway 1_v3.png|Networking rutos manual wireless mesh gateway general settings|border|class=tlt-border]]
Next navigate to '''Wireless Security''' tab and select '''WPA3-SAE''' encryption to add authentication layer. The password must match in all devices within the mesh network.
[[File:Networking rutos manual wireless mesh gateway 2_v3.png|Networking rutos manual wireless mesh gateway security|border|class=tlt-border]]
Lastly, in '''Advanced Settings''' tab enable '''Forward mesh peer traffic''' and set '''RSSI threshold for joining''' to -80. Leave the rest as set by default.
[[File:Networking_rutos_manual_wireless_scan_button_results_join_network.png|border|class=tlt-border]]
[[File:Networking rutos manual wireless mesh gateway 3_v4.png|Networking rutos manual wireless mesh gateway advanced settings|border|class=tlt-border]]
Click '''Save & Apply''' and if you configured correctly, you will have wireless mesh gateway ready.
=====Mesh Node=====
Mesh node is configured the same way as mesh gateway. Node has to match gateway's wireless mesh interface configuration. Additionally, WAN interface has to be setup as DHCP client:
1. Access router‘s WebUI. Navigate to Network → WAN.
2. Press edit button on the right of the WAN interface.
[[File:Networking_rutos_manual_wireless_multi_ap_button_{{#ifeq:{{{series}}}|TCR1|tcr1_|}}v1.png|border|class=tlt-border]]
[[File:Networking rutx11 configuration example wireless mesh mesh node configuration 1 v5.png|border|class=tlt-border]]
3. Change Protocol to DHCP and select necessary device . Click '''Save & Apply''' and If everything was setup correctly, mesh node should be ready use.
====Multi AP====
The <b>Multi AP</b> feature is used to configure access to multiple wireless access points from one page. To create Multi AP wireless interface click the 'Add' button below of wireless interface in the Network → Wireless page:
===General Settings===
[[File:Networking rutos manual wireless mesh gateway add button v5.png|border|class=tlt-border]]
----
In General Setup tab change Mode to Multi AP, select desired Network which will be attached to the interface. You can also select scan time and upload file with Access Points list.
[[File:Networking_rutos_manual_wireless_multi_ap_create_network_v3.png|border|class=tlt-border]]
===Access Points===
=====Access Points=====
----
----
You can either configure multiple <b>access points</b> from this page of the WebUI or you can upload a file with a list of access point configurations. The file should contains WiFi access point configuration options and values, which should be defined as <b>option: value</b> (for example, <i>ssid: home_wifi</i>). The SSID option is mandatory.
You can either configure multiple <b>access points</b> from this page of the WebUI or you can upload a file with a list of access point configurations. The file should contains WiFi access point configuration options and values, which should be defined as <b>option: value</b> (for example, <i>ssid: home_wifi</i>). The SSID option is mandatory.
[[File:Networking_rutos_manual_wireless_multi_ap_access_points.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_wireless_multi_ap_access_points_v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<tr>
<tr>
<td>Enable</td>
<td>Enable</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Turns an access point configuration on or off.</td>
<td>Turns an access point configuration on or off.</td>
</tr>
</tr>
key: 87654321
key: 87654321
Once uploaded, the contents of the file should become visible in the Access Points list.
Once uploaded, the contents of the file should become visible in the Access Points list.}}
===WiFi QR codes===
----
Each WiFi interface has a specially designed QR code that contains information about the SSID and password of the WiFi network. After pressing the button [[File:Networking_rutos_manual_wireless_qr_code_button.png]], a QR code appears with the network's SSID and password, which you can download locally by pressing the 'Download' button. If you only want a QR code without additional information, uncheck the 'Include credentials' box.
[[File:Networking_rutos_manual_wireless_qr_code_v1.png|border|class=tlt-border]]
{{#switch:{{{series}}}|TAP100|TAP200=|#default= ==Relay Configuration==
The <b>Relay Configuration</b> section is used to relay and dynamically redirect incoming connections to a target host. Its main purpose is extending the wireless network. For example, when the device is in Wireless Station (client) mode, it can be used to bridge WAN and LAN interfaces to create a larger wireless network.<br>You can find a detailed usage example <b>[[RUTOS relay / Wi-Fi extender / repeater / bridge configuration|here]]</b>.
{{#switch: {{{series}}}
| #default =
| RUT36X|RUT9|TCR1 =
<u><b>
Note:</b> Relay is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.</u>
}}
[[File:Networking_rutos_manual_interfaces_interface_configuration_relay_configuration_v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Enabled</td>
<td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
<td>Turns the relay configuration on or off.</td>
</tr>
<tr>
<td>Interface</td>
<td>network interface; default: <b>none</b></td>
<td>Network interface associated with the wireless interface.</td>
</tr>
<tr>
<td>Wireless interface</td>
<td>network interface; default: <b>none</b></td>
<td>Wireless interface associated with the relay configuration.</td>
</tr>
</table>}}
[[Category:{{{name}}} Network section]]
[[Category:{{{name}}} Network section]]
