Teltonika Networks Wiki

Changes

Template:Networking rutos manual wireless (view source)

Revision as of 13:56, 16 April 2024

2,767 bytes added ,  16 April
no edit summary
Line 30: Line 30:  
{{#switch:{{{name}}}
 
{{#switch:{{{name}}}
 
|TCR100 = [[File:Networking_rutos_manual_wireless_wifi_5_tcr1_v4.png|border|class=tlt-border]]
 
|TCR100 = [[File:Networking_rutos_manual_wireless_wifi_5_tcr1_v4.png|border|class=tlt-border]]
−
|TAP100 = [[File:Networking_rutos_manual_wireless_wifi_tap100.png|border|class=tlt-border]]
+
|TAP100 = [[File:Networking_rutos_manual_wireless_wifi_tap100_v1.png|border|class=tlt-border]]
 
|TAP200 = [[File:Networking_rutos_manual_wireless_wifi_tap200_v1.png|border|class=tlt-border]]
 
|TAP200 = [[File:Networking_rutos_manual_wireless_wifi_tap200_v1.png|border|class=tlt-border]]
−
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = [[File:Networking rutos manual wireless wifi 2 v2 mixed.png|border|class=tlt-border]]
+
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = [[File:Networking rutos manual wireless wifi 2 v4 mixed.png|border|class=tlt-border]]
−
|#default = [[File:Networking_rutos_manual_wireless_wifi_{{{wifi}}}_v3.png|border|class=tlt-border]]
+
|#default = [[File:Networking_rutos_manual_wireless_wifi_{{{wifi}}}_v4.png|border|class=tlt-border]]
 
}}
 
}}
   Line 52: Line 52:  
|TAP100 =
 
|TAP100 =
 
|TAP200 =
 
|TAP200 =
−
|TCR1 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tcr1_v3.png|border|class=tlt-border]]
+
|TCR1 = [[File:Networking rutos manual wireless wifi 5 tcr1 v4.png|border|class=tlt-border]]
−
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = [[File:Networking rutos manual wireless wifi 2 v2 mixed.png|border|class=tlt-border]]
+
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = [[File:Networking rutos manual wireless wifi 2 v4 mixed.png|border|class=tlt-border]]
−
|#default = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_v4.png|border|class=tlt-border]]
+
|#default = [[File:Networking_rutos_manual_wireless_wifi_{{{wifi}}}_v4.png|border|class=tlt-border]]
 
}}
 
}}
   Line 65: Line 65:  
Many home networks utilize routers that by default run on channel 6 on the 2.4 GHz band. Neighboring WiFi home networks that run over the same channel generate radio interference that can cause significant network performance slowdowns for users. Reconfiguring a network to run on a different wireless channel helps minimize these slowdowns. Therefore, pick a channel with no other active Access Points and preferably one that has no active Access Point on two adjacent channels on each side as well. If you don't feel like doing this, set the 'Channel' field to <i>Auto</i> and the device will pick the least busy channel in your location automatically.  
 
Many home networks utilize routers that by default run on channel 6 on the 2.4 GHz band. Neighboring WiFi home networks that run over the same channel generate radio interference that can cause significant network performance slowdowns for users. Reconfiguring a network to run on a different wireless channel helps minimize these slowdowns. Therefore, pick a channel with no other active Access Points and preferably one that has no active Access Point on two adjacent channels on each side as well. If you don't feel like doing this, set the 'Channel' field to <i>Auto</i> and the device will pick the least busy channel in your location automatically.  
 
{{#switch:{{{series}}}
 
{{#switch:{{{series}}}
−
|TAP100 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tap100_v2.png|border|class=tlt-border]]
+
|TAP100 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tap100_v3.png|border|class=tlt-border]]
 
|TAP200 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tap200_v1.png|border|class=tlt-border]]
 
|TAP200 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tap200_v1.png|border|class=tlt-border]]
−
|#default = [[File:Networking_rutos_manual_wireless_global_settings_general_setup_v2.png|border|class=tlt-border]]
+
|#default = [[File:Networking_rutos_manual_wireless_global_settings_general_setup_v3.png|border|class=tlt-border]]
 
}}
 
}}
   Line 143: Line 143:     
{{#switch:{{{series}}}
 
{{#switch:{{{series}}}
−
|TAP100|TAP200 = [[File:Networking_rutos_manual_wireless_global_settings_advanced_settings_tap100.png|border|class=tlt-border]]
+
|TAP100|TAP200 = [[File:Networking_rutos_manual_wireless_global_settings_advanced_settings_tap100_v1.png|border|class=tlt-border]]
−
|#default =[[File:Networking_rutos_manual_wireless_global_settings_advanced_settings_v1.png|border|class=tlt-border]]
+
|#default =[[File:Networking_rutos_manual_wireless_global_settings_advanced_settings_v2.png|border|class=tlt-border]]
 
}}
 
}}
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 223: Line 223:  
     </tr>|}}
 
     </tr>|}}
 
</table>
 
</table>
−
  −
{{#switch:{{{series}}}|TAP100|TAP200= |#default= =====WiFi Scanner=====
  −
----
  −
The <b>WiFi Scanner</b> provides you with the possibility to scan and collect information about connected devices and surrounding access points. The collected data is sent using the [[{{{name}}} Data to Server|Data to Server]] functionality with Kinesis argument.
  −
{{#switch: {{{series}}}
  −
  | #default =
  −
  | RUT36X|RUT9|TCR1|RUT2|RUT2M|RUT9M = <u><b>Note:</b> WiFi Scanner is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.</u>
  −
}}
  −
[[File:Networking_rutos_manual_wireless_global_settings_wifi_scanner_v1.png|border|class=tlt-border]]
  −
  −
<table class="nd-mantable">
  −
    <tr>
  −
        <th>Field</th>
  −
        <th>Value</th>
  −
        <th>Description</th>
  −
    </tr>
  −
    <tr>
  −
      <td>Enable</td>
  −
      <td>off {{!}} on; default: <b>off</b></td>
  −
      <td>Enables or disables WiFi scanner.</td>
  −
    </tr>
  −
      <tr>
  −
      <td>Interval</td>
  −
      <td>integer; default: <b>10</b></td>
  −
      <td>Interval between scans in seconds.</td>
  −
    </tr>
  −
</table>}}
      
====Interface Configuration====
 
====Interface Configuration====
Line 255: Line 228:  
The <b>Interface Configuration</b> section is used to configure the parameters of Wireless Access Points{{#switch:{{{series}}}|TAP100|TAP200=|#default= or Clients}}. You can find this section by clicking the 'Edit' button next to a wireless device (<u>not an interface</u>) in the Network → SSIDs page:
 
The <b>Interface Configuration</b> section is used to configure the parameters of Wireless Access Points{{#switch:{{{series}}}|TAP100|TAP200=|#default= or Clients}}. You can find this section by clicking the 'Edit' button next to a wireless device (<u>not an interface</u>) in the Network → SSIDs page:
 
{{#switch: {{{name}}}
 
{{#switch: {{{name}}}
−
|#default = [[File:Networking_rutos_manual_wireless_interface_configuration_edit_button_v3.png|border|class=tlt-border]]
+
|#default = [[File:Networking_rutos_manual_wireless_wifi_{{{wifi}}}_v4.png|border|class=tlt-border]]
−
|TCR100 = [[File:Networking_rutos_manual_wireless_interface_configuration_edit_button_tcr1_v3.png|border|class=tlt-border]]
+
|TCR100 = [[File:Networking rutos manual wireless wifi 5 tcr1 v4.png|border|class=tlt-border]]
−
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_edit_button_tap100_v3.png|border|class=tlt-border]]
+
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_edit_button_tap100_v5.png|border|class=tlt-border]]
−
|TAP200 = [[File:Networking_rutos_manual_wireless_wifi_tap200_v1.png|border|class=tlt-border]]
+
|TAP200 = [[File:Networking_rutos_manual_wireless_wifi_tap200_v2.png|border|class=tlt-border]]
−
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = [[File:Networking rutos manual wireless interface configuration edit button mixed v2.png|border|class=tlt-border]]
+
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = [[File:Networking rutos manual wireless wifi 2 v4 mixed.png|border|class=tlt-border]]
 
}}
 
}}
 
=====General Setup=====
 
=====General Setup=====
Line 265: Line 238:  
The <b>General Setup</b> tab contains basic options for ESSID and network interface.
 
The <b>General Setup</b> tab contains basic options for ESSID and network interface.
 
{{#switch: {{{series}}}
 
{{#switch: {{{series}}}
−
|#default = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_v2.png|border|class=tlt-border]]
+
|#default = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_v4.png|border|class=tlt-border]]
−
|TCR1 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tcr1_v2.png|border|class=tlt-border]]
+
|TCR1 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tcr1_v4.png|border|class=tlt-border]]
−
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tap100_v2.png|border|class=tlt-border]]
+
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tap100_v4.png|border|class=tlt-border]]
−
|TAP200 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tap200_v1.png|border|class=tlt-border]]
+
|TAP200 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tap200_v2.png|border|class=tlt-border]]
 
}}
 
}}
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 309: Line 282:  
         <td>Password</td>
 
         <td>Password</td>
 
         <td>string; default: <b>none</b></td>
 
         <td>string; default: <b>none</b></td>
−
         <td>Custom passphrase used for authentication (at least 8 characters long).</td>
+
         <td><li>Custom passphrase used for authentication (at least 8 characters long).</li><li>Another option is to use the 'Dice' icon, which generates random passwords.</li></td>
 
     </tr>{{#switch:{{{series}}}|TAP100|TAP200=
 
     </tr>{{#switch:{{{series}}}|TAP100|TAP200=
 
     <tr>
 
     <tr>
Line 349: Line 322:  
         <th></th>
 
         <th></th>
 
         <th></th>     
 
         <th></th>     
 +
    </tr>
 +
    <tr>
 +
        <td>Auto-reconnect</td>
 +
        <td>on {{!}} off; default: <b>on</b></td>
 +
        <td>Enables automatic reconnection to the configured access point on connection loss.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 363: Line 341:  
         <td>Password</td>
 
         <td>Password</td>
 
         <td>string; default: <b>none</b></td>
 
         <td>string; default: <b>none</b></td>
−
         <td>Custom passphrase used for authentication (at least 8 characters long).</td>
+
         <td><li>Custom passphrase used for authentication (at least 8 characters long).</li><li>Another option is to use the 'Dice' icon, which generates random passwords.</li></td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 369: Line 347:  
         <td>network interfaces; default: <b>Auto</b></td>
 
         <td>network interfaces; default: <b>Auto</b></td>
 
         <td>Choose the network you want to attach to this wireless interface or fill out the Custom field to define a new network (you will be redirected to the newly created network configuration page).</td>
 
         <td>Choose the network you want to attach to this wireless interface or fill out the Custom field to define a new network (you will be redirected to the newly created network configuration page).</td>
−
     </tr>}}{{#switch:{{{series}}}|TAP100|TAP200=|#default=
+
     </tr>}}{{#switch:{{{series}}}|TAP100|TAP200=
 +
    <tr>
 +
        <th>Mesh mode</th>
 +
        <th></th>
 +
        <th></th>   
 +
    </tr>
 +
    <tr>
 +
        <td>Mesh ID</td>
 +
        <td>integer; default: <b>none</b></td>
 +
        <td>Mesh network identifier.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Password</td>
 +
        <td>string; default: <b>none</b></td>
 +
        <td><li>Custom passphrase used for authentication (at least 8 characters long).</li><li>Another option is to use the 'Dice' icon, which generates random passwords.</li></td>
 +
    </tr>
 +
    |#default=
 
     <tr>
 
     <tr>
 
         <th>Mesh mode</th>
 
         <th>Mesh mode</th>
Line 383: Line 377:  
         <td>Password</td>
 
         <td>Password</td>
 
         <td>string; default: <b>none</b></td>
 
         <td>string; default: <b>none</b></td>
−
         <td>Custom passphrase used for authentication (at least 8 characters long).</td>
+
         <td><li>Custom passphrase used for authentication (at least 8 characters long).</li><li>Another option is to use the 'Dice' icon, which generates random passwords.</li></td>
 
     </tr>
 
     </tr>
 
         <tr>
 
         <tr>
Line 411: Line 405:  
     </tr>}}
 
     </tr>}}
 
</table>
 
</table>
 +
 +
=====Additional Settings=====
 +
----
 +
 +
[[File:Networking rutos manual wireless interface configuration additional settings access point v1.png|border|class=tlt-border]]
 +
 +
<table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <th>Access point</th>
 +
        <th></th>
 +
        <th></th>   
 +
    </tr>
 +
    <tr>
 +
        <td>Hide SSID</td>
 +
        <td>on {{!}} off; default: <b>off</b></td>
 +
        <td>Hide Service Set Identifier </td>
 +
    </tr>
 +
    <tr>
 +
      <td>Isolate Clients</td>
 +
      <td>off {{!}} on; default: <b>off</b></td>
 +
      <td>Prevents client to client communication on the same subnet.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>802.11v BSS Transition Management</td>
 +
        <td>on {{!}} off; default: <b>off</b></td>
 +
        <td>A suggestion (or advice) given to a client, which the client can choose to follow or ignore</td>
 +
    </tr>
 +
    <tr>
 +
        <td>802.11k Radio Resource Measurement</td>
 +
        <td>on {{!}} off; default: <b>off</b></td>
 +
        <td>Helps devices search quickly for nearby APs that are available as roaming targets by creating an optimized list of channels.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Disassociate On Low Acknowledgement</td>
 +
        <td>off {{!}} on; default: <b>on</b></td>
 +
        <td>Allow AP mode to disconnect stations/clients based on low Acknowledgement condition.</td>
 +
    </tr>
 +
</table>
 +
{{#switch:{{{series}}}|TAP100|TAP200=|#default=
 +
----
 +
[[File:Networking rutos manual wireless interface configuration additional settings client multi ap v1.png|border|class=tlt-border]]
 +
 +
<table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <th>Client & Multi AP</th>
 +
        <th></th>
 +
        <th></th>   
 +
    </tr>
 +
    <tr>
 +
        <td>Disassociate On Low Acknowledgement</td>
 +
        <td>off {{!}} on; default: <b>on</b></td>
 +
        <td>Allow AP mode to disconnect stations/clients based on low Acknowledgement condition.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Enable fast roaming</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Requests background scans for the purpose of roaming within an ESS.</td>
 +
    </tr>
 +
    </table>
 +
   
 +
----
 +
 +
[[File:Networking rutos manual wireless interface configuration mesh additional settings v1.png|border|class=tlt-border]]
 +
 +
<table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <th>Mesh</th>
 +
        <th></th>
 +
        <th></th>   
 +
    </tr>
 +
    <tr>
 +
        <td>Forward mesh peer traffic </td>
 +
        <td>off {{!}} on; default: <b>on</b></td>
 +
        <td>Enables mesh peer traffic forwarding.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>RSSI threshold for joining </td>
 +
        <td>integer [0..1]; default: <b>0</b></td>
 +
        <td>0 = not using RSSI threshold, 1 = do not change driver default.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Enable fast roaming</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Requests background scans for the purpose of roaming within an ESS.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Disassociate On Low Acknowledgement</td>
 +
        <td>off {{!}} on; default: <b>on</b></td>
 +
        <td>Allow AP mode to disconnect stations/clients based on low Acknowledgement condition.</td>
 +
    </tr>
 +
    </table>}}
    
{{#switch:{{{series}}}|TAP100|TAP200=|#default= =====Wireless Security=====
 
{{#switch:{{{series}}}|TAP100|TAP200=|#default= =====Wireless Security=====
Line 416: Line 516:  
The <b>Wireless Security</b> tab is used to determine what kind of encryption your WLAN will use.  
 
The <b>Wireless Security</b> tab is used to determine what kind of encryption your WLAN will use.  
   −
[[File:Networking_rutos_manual_wireless_interface_configuration_wireless_security_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_wireless_interface_configuration_wireless_security_v4.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 455: Line 555:  
     <td>Password</td>
 
     <td>Password</td>
 
         <td>string; default: <b>none</b> </td>
 
         <td>string; default: <b>none</b> </td>
−
         <td>A custom passphrase used for authentication (at least 8 characters long).</td>
+
         <td><li>Custom passphrase used for authentication (at least 8 characters long).</li><li>Another option is to use the 'Dice' icon, which generates random passwords.</li></td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 504: Line 604:  
This tab is only visible when Wireless interface Mode is set to <b>Access Point</b>.
 
This tab is only visible when Wireless interface Mode is set to <b>Access Point</b>.
 
{{#switch:{{{series}}}
 
{{#switch:{{{series}}}
−
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_mac_filter_tap100.png|border|class=tlt-border]]
+
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_mac_filter_tap100_v1.png|border|class=tlt-border]]
−
|#default = [[File:Networking_rutos_manual_wireless_interface_configuration_mac_filter_v2.png|border|class=tlt-border]]}}
+
|#default = [[File:Networking_rutos_manual_wireless_interface_configuration_mac_filter_v3.png|border|class=tlt-border]]}}
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 538: Line 638:  
----
 
----
 
{{#switch:{{{series}}}
 
{{#switch:{{{series}}}
−
|TAP100 = [[File:Networking rutos manual wireless interface configuration advanced settings tap100.png|border|class=tlt-border]]
+
|TAP100 = [[File:Networking rutos manual wireless interface configuration advanced settings tap100_v1.png|border|class=tlt-border]]
 
|TAP200 = [[File:Networking rutos manual wireless interface configuration advanced settings tap200_v1.png|border|class=tlt-border]]
 
|TAP200 = [[File:Networking rutos manual wireless interface configuration advanced settings tap200_v1.png|border|class=tlt-border]]
−
|#default = [[File:Networking rutos manual wireless interface configuration advanced settings access_point.png|border|class=tlt-border]]}}
+
|#default = [[File:Networking rutos manual wireless interface configuration advanced settings access_point_v1.png|border|class=tlt-border]]}}
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 552: Line 652:  
         <th></th>
 
         <th></th>
 
         <th></th>     
 
         <th></th>     
−
    </tr>
  −
    <tr>
  −
      <td>Isolate Clients</td>
  −
      <td>off {{!}} on; default: <b>off</b></td>
  −
      <td>Prevents client to client communication on the same subnet.</td>
   
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 587: Line 682:  
         <td>positive integer; default: <b>none</b> </td>
 
         <td>positive integer; default: <b>none</b> </td>
 
         <td>Association will be refused if a client/station attempts to associate with a listen interval greater than this value.</td>
 
         <td>Association will be refused if a client/station attempts to associate with a listen interval greater than this value.</td>
−
    </tr>
  −
    <tr>
  −
        <td>Disassociate On Low Acknowledgement</td>
  −
        <td>off {{!}} on; default: <b>on</b></td>
  −
        <td>Allow AP mode to disconnect stations/clients based on low Acknowledgement condition.</td>
   
     </tr>{{#switch:{{{series}}}|TAP100|TAP200=|#default=
 
     </tr>{{#switch:{{{series}}}|TAP100|TAP200=|#default=
 
     <tr>
 
     <tr>
Line 611: Line 701:     
{{#switch:{{{series}}}|TAP100|TAP200 =
 
{{#switch:{{{series}}}|TAP100|TAP200 =
−
|#default = [[File:Networking rutos manual wireless interface configuration advanced settings client_multi_ap.png|border|class=tlt-border]]
+
|#default = [[File:Networking rutos manual wireless interface configuration advanced settings client_multi_ap_v1.png|border|class=tlt-border]]
 
<table class="nd-mantable">
 
<table class="nd-mantable">
 
     <tr>
 
     <tr>
Line 671: Line 761:     
{{#switch:{{{series}}}|TAP100|TAP200 =
 
{{#switch:{{{series}}}|TAP100|TAP200 =
−
|#default = [[File:Networking rutos manual wireless interface configuration advanced settings tap200 v1.png|border|class=tlt-border]]
+
|#default = [[File:Networking rutos manual wireless interface configuration mesh advanced settings v1.png|border|class=tlt-border]]
 
<table class="nd-mantable">
 
<table class="nd-mantable">
 
     <tr>
 
     <tr>
Line 739: Line 829:  
The <b>Fast Transition</b> tab is only available when in <b>General setup</b> section <b>802.11r Fast Transition</b> option is enabled.
 
The <b>Fast Transition</b> tab is only available when in <b>General setup</b> section <b>802.11r Fast Transition</b> option is enabled.
   −
[[File:Networking rutos manual wireless interface configuration fast transition settings.png|border|class=tlt-border]]
+
[[File:Networking rutos manual wireless interface configuration fast transition settings_v1.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 773: Line 863:  
The <b>Fast Roaming</b> tab is only available when in <b>General setup</b> section <b>Client</b> mode is selected and in <b>Advanced settings</b> tab <b>Enable fast roaming</b> option is enabled.
 
The <b>Fast Roaming</b> tab is only available when in <b>General setup</b> section <b>Client</b> mode is selected and in <b>Advanced settings</b> tab <b>Enable fast roaming</b> option is enabled.
   −
[[File:Networking rutos manual wireless interface configuration fast roaming settings.png|border|class=tlt-border]]
+
[[File:Networking rutos manual wireless interface configuration fast roaming settings_v1.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 817: Line 907:  
To begin configuring WiFi Client first click the 'Scan' button to scan the surrounding area and attempt to connect to a new wireless access point.
 
To begin configuring WiFi Client first click the 'Scan' button to scan the surrounding area and attempt to connect to a new wireless access point.
   −
[[File:Networking_rutos_manual_wireless_scan_button.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_wireless_scan_button_v1.png|border|class=tlt-border]]
    
After which you will be redirected to the window shown below, where you will see list of available WiFi Access Points in the area. Choose one according to your liking and press the '''Join Network''' button next to it.
 
After which you will be redirected to the window shown below, where you will see list of available WiFi Access Points in the area. Choose one according to your liking and press the '''Join Network''' button next to it.
Line 829: Line 919:  
Next window that opens will be '''Device Configuration'''. Values there, mostly, should be left unchanged to avoid connection problems, because they are dictated by Access Point. Other than that, only difference from Access Point settings are in ''Interface Configuration → General Setup'' section, where '''Mode''' is set to '''Client''', and '''Network''' attached to this wireless interface is '''wifi1''' instead of LAN
 
Next window that opens will be '''Device Configuration'''. Values there, mostly, should be left unchanged to avoid connection problems, because they are dictated by Access Point. Other than that, only difference from Access Point settings are in ''Interface Configuration → General Setup'' section, where '''Mode''' is set to '''Client''', and '''Network''' attached to this wireless interface is '''wifi1''' instead of LAN
   −
[[File:Networking_rutos_manual_wireless_scan_button_results_join_network_general_setup_v3.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_wireless_scan_button_results_join_network_general_setup_v4.png|border|class=tlt-border]]
    
Click '''Save & Apply''' and if you configured correctly, you will have Wireless Client working.
 
Click '''Save & Apply''' and if you configured correctly, you will have Wireless Client working.
Line 847: Line 937:  
To begin click the 'Add' button below of wireless interface in the Network → Wireless page:
 
To begin click the 'Add' button below of wireless interface in the Network → Wireless page:
   −
[[File:Networking rutos manual wireless mesh gateway add button v4.png|border|class=tlt-border]]
+
[[File:Networking rutos manual wireless mesh gateway add button v5.png|border|class=tlt-border]]
    
In '''General Setup''' tab change '''Mode''' to '''Mesh''', set '''Mesh ID''' (this number has to be the same in all nodes that connect to this wireless mesh network) and select desired '''Network''' which will be attached to the interface. Click '''Save & Apply'''.
 
In '''General Setup''' tab change '''Mode''' to '''Mesh''', set '''Mesh ID''' (this number has to be the same in all nodes that connect to this wireless mesh network) and select desired '''Network''' which will be attached to the interface. Click '''Save & Apply'''.
   −
[[File:Networking rutos manual wireless mesh gateway 1_v2.png|Networking rutos manual wireless mesh gateway general settings|border|class=tlt-border]]
+
[[File:Networking rutos manual wireless mesh gateway 1_v3.png|Networking rutos manual wireless mesh gateway general settings|border|class=tlt-border]]
    
Next navigate to '''Wireless Security''' tab and select '''WPA3-SAE''' encryption to add authentication layer. The password must match in all devices within the mesh network.
 
Next navigate to '''Wireless Security''' tab and select '''WPA3-SAE''' encryption to add authentication layer. The password must match in all devices within the mesh network.
   −
[[File:Networking rutos manual wireless mesh gateway 2_v2.png|Networking rutos manual wireless mesh gateway security|border|class=tlt-border]]
+
[[File:Networking rutos manual wireless mesh gateway 2_v3.png|Networking rutos manual wireless mesh gateway security|border|class=tlt-border]]
    
Lastly, in '''Advanced Settings''' tab enable '''Forward mesh peer traffic''' and set '''RSSI threshold for joining''' to -80. Leave the rest as set by default.
 
Lastly, in '''Advanced Settings''' tab enable '''Forward mesh peer traffic''' and set '''RSSI threshold for joining''' to -80. Leave the rest as set by default.
   −
[[File:Networking rutos manual wireless mesh gateway 3_v2.png|Networking rutos manual wireless mesh gateway advanced settings|border|class=tlt-border]]
+
[[File:Networking rutos manual wireless mesh gateway 3_v4.png|Networking rutos manual wireless mesh gateway advanced settings|border|class=tlt-border]]
    
Click '''Save & Apply''' and if you configured correctly, you will have wireless mesh gateway ready.
 
Click '''Save & Apply''' and if you configured correctly, you will have wireless mesh gateway ready.
Line 865: Line 955:  
=====Mesh Node=====
 
=====Mesh Node=====
   −
Mesh node is configured the same way as mesh gateway. Node has to match gateway's wireless mesh interface configuration. Additionally, LAN interface has to be setup as DHCP client:
+
Mesh node is configured the same way as mesh gateway. Node has to match gateway's wireless mesh interface configuration. Additionally, WAN interface has to be setup as DHCP client:
−
 
  −
1. Access router‘s WebUI. Navigate to Network → Interfaces.
  −
 
  −
2. Press pencil icon on the right of the LAN interface.
     −
[[File:Networking rutx11 configuration example wireless mesh mesh node configuration 1 v3.png|border|class=tlt-border]]
+
1. Access router‘s WebUI. Navigate to Network → WAN.
   −
3. Change Protocol to DHCP.
+
2. Press edit button on the right of the WAN interface.
   −
[[File:Networking rutx11 configuration example wireless mesh mesh node configuration 2 v3.png|border|class=tlt-border]]
+
[[File:Networking rutx11 configuration example wireless mesh mesh node configuration 1 v5.png|border|class=tlt-border]]
   −
Click '''Save & Apply''' and If everything was setup correctly, mesh node should be ready use.
+
3. Change Protocol to DHCP and select necessary device . Click '''Save & Apply''' and If everything was setup correctly, mesh node should be ready use.
    
====Multi AP====
 
====Multi AP====
Line 883: Line 969:  
The <b>Multi AP</b> feature is used to configure access to multiple wireless access points from one page. To create Multi AP wireless interface click the 'Add' button below of wireless interface in the Network → Wireless page:
 
The <b>Multi AP</b> feature is used to configure access to multiple wireless access points from one page. To create Multi AP wireless interface click the 'Add' button below of wireless interface in the Network → Wireless page:
   −
[[File:Networking rutos manual wireless mesh gateway add button v4.png|border|class=tlt-border]]
+
[[File:Networking rutos manual wireless mesh gateway add button v5.png|border|class=tlt-border]]
    
In General Setup tab change Mode to Multi AP, select desired Network which will be attached to the interface. You can also select scan time and upload file with Access Points list.
 
In General Setup tab change Mode to Multi AP, select desired Network which will be attached to the interface. You can also select scan time and upload file with Access Points list.
   −
[[File:Networking_rutos_manual_wireless_multi_ap_create_network_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_wireless_multi_ap_create_network_v3.png|border|class=tlt-border]]
    
=====Access Points=====
 
=====Access Points=====
Line 893: Line 979:  
You can either configure multiple <b>access points</b> from this page of the WebUI or you can upload a file with a list of access point configurations. The file should contains WiFi access point configuration options and values, which should be defined as <b>option: value</b> (for example, <i>ssid: home_wifi</i>). The SSID option is mandatory.
 
You can either configure multiple <b>access points</b> from this page of the WebUI or you can upload a file with a list of access point configurations. The file should contains WiFi access point configuration options and values, which should be defined as <b>option: value</b> (for example, <i>ssid: home_wifi</i>). The SSID option is mandatory.
   −
[[File:Networking_rutos_manual_wireless_multi_ap_access_points.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_wireless_multi_ap_access_points_v1.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 938: Line 1,024:  
Each WiFi interface has a specially designed QR code that contains information about the SSID and password of the WiFi network. After pressing the button [[File:Networking_rutos_manual_wireless_qr_code_button.png]], a QR code appears with the network's SSID and password, which you can download locally by pressing the 'Download' button. If you only want a QR code without additional information, uncheck the 'Include credentials' box.
 
Each WiFi interface has a specially designed QR code that contains information about the SSID and password of the WiFi network. After pressing the button [[File:Networking_rutos_manual_wireless_qr_code_button.png]], a QR code appears with the network's SSID and password, which you can download locally by pressing the 'Download' button. If you only want a QR code without additional information, uncheck the 'Include credentials' box.
   −
[[File:Networking_rutos_manual_wireless_qr_code.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_wireless_qr_code_v1.png|border|class=tlt-border]]
    
{{#switch:{{{series}}}|TAP100|TAP200=|#default= ==Relay Configuration==
 
{{#switch:{{{series}}}|TAP100|TAP200=|#default= ==Relay Configuration==
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/117783...123812"