Teltonika Networks Wiki

Changes

Template:Networking rutos manual wireless (view source)

Revision as of 13:56, 16 April 2024

4,053 bytes added ,  16 April
no edit summary
Line 230: Line 230:  
|#default = [[File:Networking_rutos_manual_wireless_wifi_{{{wifi}}}_v4.png|border|class=tlt-border]]
 
|#default = [[File:Networking_rutos_manual_wireless_wifi_{{{wifi}}}_v4.png|border|class=tlt-border]]
 
|TCR100 = [[File:Networking rutos manual wireless wifi 5 tcr1 v4.png|border|class=tlt-border]]
 
|TCR100 = [[File:Networking rutos manual wireless wifi 5 tcr1 v4.png|border|class=tlt-border]]
−
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_edit_button_tap100_v4.png|border|class=tlt-border]]
+
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_edit_button_tap100_v5.png|border|class=tlt-border]]
−
|TAP200 = [[File:Networking_rutos_manual_wireless_wifi_tap200_v1.png|border|class=tlt-border]]
+
|TAP200 = [[File:Networking_rutos_manual_wireless_wifi_tap200_v2.png|border|class=tlt-border]]
 
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = [[File:Networking rutos manual wireless wifi 2 v4 mixed.png|border|class=tlt-border]]
 
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = [[File:Networking rutos manual wireless wifi 2 v4 mixed.png|border|class=tlt-border]]
 
}}
 
}}
Line 238: Line 238:  
The <b>General Setup</b> tab contains basic options for ESSID and network interface.
 
The <b>General Setup</b> tab contains basic options for ESSID and network interface.
 
{{#switch: {{{series}}}
 
{{#switch: {{{series}}}
−
|#default = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_v3.png|border|class=tlt-border]]
+
|#default = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_v4.png|border|class=tlt-border]]
−
|TCR1 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tcr1_v3.png|border|class=tlt-border]]
+
|TCR1 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tcr1_v4.png|border|class=tlt-border]]
−
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tap100_v3.png|border|class=tlt-border]]
+
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tap100_v4.png|border|class=tlt-border]]
−
|TAP200 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tap200_v1.png|border|class=tlt-border]]
+
|TAP200 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tap200_v2.png|border|class=tlt-border]]
 
}}
 
}}
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 282: Line 282:  
         <td>Password</td>
 
         <td>Password</td>
 
         <td>string; default: <b>none</b></td>
 
         <td>string; default: <b>none</b></td>
−
         <td>Custom passphrase used for authentication (at least 8 characters long).</td>
+
         <td><li>Custom passphrase used for authentication (at least 8 characters long).</li><li>Another option is to use the 'Dice' icon, which generates random passwords.</li></td>
 
     </tr>{{#switch:{{{series}}}|TAP100|TAP200=
 
     </tr>{{#switch:{{{series}}}|TAP100|TAP200=
 
     <tr>
 
     <tr>
Line 322: Line 322:  
         <th></th>
 
         <th></th>
 
         <th></th>     
 
         <th></th>     
 +
    </tr>
 +
    <tr>
 +
        <td>Auto-reconnect</td>
 +
        <td>on {{!}} off; default: <b>on</b></td>
 +
        <td>Enables automatic reconnection to the configured access point on connection loss.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 336: Line 341:  
         <td>Password</td>
 
         <td>Password</td>
 
         <td>string; default: <b>none</b></td>
 
         <td>string; default: <b>none</b></td>
−
         <td>Custom passphrase used for authentication (at least 8 characters long).</td>
+
         <td><li>Custom passphrase used for authentication (at least 8 characters long).</li><li>Another option is to use the 'Dice' icon, which generates random passwords.</li></td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 342: Line 347:  
         <td>network interfaces; default: <b>Auto</b></td>
 
         <td>network interfaces; default: <b>Auto</b></td>
 
         <td>Choose the network you want to attach to this wireless interface or fill out the Custom field to define a new network (you will be redirected to the newly created network configuration page).</td>
 
         <td>Choose the network you want to attach to this wireless interface or fill out the Custom field to define a new network (you will be redirected to the newly created network configuration page).</td>
−
     </tr>}}{{#switch:{{{series}}}|TAP100|TAP200=|#default=
+
     </tr>}}{{#switch:{{{series}}}|TAP100|TAP200=
 +
    <tr>
 +
        <th>Mesh mode</th>
 +
        <th></th>
 +
        <th></th>   
 +
    </tr>
 +
    <tr>
 +
        <td>Mesh ID</td>
 +
        <td>integer; default: <b>none</b></td>
 +
        <td>Mesh network identifier.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Password</td>
 +
        <td>string; default: <b>none</b></td>
 +
        <td><li>Custom passphrase used for authentication (at least 8 characters long).</li><li>Another option is to use the 'Dice' icon, which generates random passwords.</li></td>
 +
    </tr>
 +
    |#default=
 
     <tr>
 
     <tr>
 
         <th>Mesh mode</th>
 
         <th>Mesh mode</th>
Line 356: Line 377:  
         <td>Password</td>
 
         <td>Password</td>
 
         <td>string; default: <b>none</b></td>
 
         <td>string; default: <b>none</b></td>
−
         <td>Custom passphrase used for authentication (at least 8 characters long).</td>
+
         <td><li>Custom passphrase used for authentication (at least 8 characters long).</li><li>Another option is to use the 'Dice' icon, which generates random passwords.</li></td>
 
     </tr>
 
     </tr>
 
         <tr>
 
         <tr>
Line 384: Line 405:  
     </tr>}}
 
     </tr>}}
 
</table>
 
</table>
 +
 +
=====Additional Settings=====
 +
----
 +
 +
[[File:Networking rutos manual wireless interface configuration additional settings access point v1.png|border|class=tlt-border]]
 +
 +
<table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <th>Access point</th>
 +
        <th></th>
 +
        <th></th>   
 +
    </tr>
 +
    <tr>
 +
        <td>Hide SSID</td>
 +
        <td>on {{!}} off; default: <b>off</b></td>
 +
        <td>Hide Service Set Identifier </td>
 +
    </tr>
 +
    <tr>
 +
      <td>Isolate Clients</td>
 +
      <td>off {{!}} on; default: <b>off</b></td>
 +
      <td>Prevents client to client communication on the same subnet.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>802.11v BSS Transition Management</td>
 +
        <td>on {{!}} off; default: <b>off</b></td>
 +
        <td>A suggestion (or advice) given to a client, which the client can choose to follow or ignore</td>
 +
    </tr>
 +
    <tr>
 +
        <td>802.11k Radio Resource Measurement</td>
 +
        <td>on {{!}} off; default: <b>off</b></td>
 +
        <td>Helps devices search quickly for nearby APs that are available as roaming targets by creating an optimized list of channels.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Disassociate On Low Acknowledgement</td>
 +
        <td>off {{!}} on; default: <b>on</b></td>
 +
        <td>Allow AP mode to disconnect stations/clients based on low Acknowledgement condition.</td>
 +
    </tr>
 +
</table>
 +
{{#switch:{{{series}}}|TAP100|TAP200=|#default=
 +
----
 +
[[File:Networking rutos manual wireless interface configuration additional settings client multi ap v1.png|border|class=tlt-border]]
 +
 +
<table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <th>Client & Multi AP</th>
 +
        <th></th>
 +
        <th></th>   
 +
    </tr>
 +
    <tr>
 +
        <td>Disassociate On Low Acknowledgement</td>
 +
        <td>off {{!}} on; default: <b>on</b></td>
 +
        <td>Allow AP mode to disconnect stations/clients based on low Acknowledgement condition.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Enable fast roaming</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Requests background scans for the purpose of roaming within an ESS.</td>
 +
    </tr>
 +
    </table>
 +
   
 +
----
 +
 +
[[File:Networking rutos manual wireless interface configuration mesh additional settings v1.png|border|class=tlt-border]]
 +
 +
<table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <th>Mesh</th>
 +
        <th></th>
 +
        <th></th>   
 +
    </tr>
 +
    <tr>
 +
        <td>Forward mesh peer traffic </td>
 +
        <td>off {{!}} on; default: <b>on</b></td>
 +
        <td>Enables mesh peer traffic forwarding.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>RSSI threshold for joining </td>
 +
        <td>integer [0..1]; default: <b>0</b></td>
 +
        <td>0 = not using RSSI threshold, 1 = do not change driver default.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Enable fast roaming</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Requests background scans for the purpose of roaming within an ESS.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Disassociate On Low Acknowledgement</td>
 +
        <td>off {{!}} on; default: <b>on</b></td>
 +
        <td>Allow AP mode to disconnect stations/clients based on low Acknowledgement condition.</td>
 +
    </tr>
 +
    </table>}}
    
{{#switch:{{{series}}}|TAP100|TAP200=|#default= =====Wireless Security=====
 
{{#switch:{{{series}}}|TAP100|TAP200=|#default= =====Wireless Security=====
Line 389: Line 516:  
The <b>Wireless Security</b> tab is used to determine what kind of encryption your WLAN will use.  
 
The <b>Wireless Security</b> tab is used to determine what kind of encryption your WLAN will use.  
   −
[[File:Networking_rutos_manual_wireless_interface_configuration_wireless_security_v3.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_wireless_interface_configuration_wireless_security_v4.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 428: Line 555:  
     <td>Password</td>
 
     <td>Password</td>
 
         <td>string; default: <b>none</b> </td>
 
         <td>string; default: <b>none</b> </td>
−
         <td>A custom passphrase used for authentication (at least 8 characters long).</td>
+
         <td><li>Custom passphrase used for authentication (at least 8 characters long).</li><li>Another option is to use the 'Dice' icon, which generates random passwords.</li></td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 525: Line 652:  
         <th></th>
 
         <th></th>
 
         <th></th>     
 
         <th></th>     
−
    </tr>
  −
    <tr>
  −
      <td>Isolate Clients</td>
  −
      <td>off {{!}} on; default: <b>off</b></td>
  −
      <td>Prevents client to client communication on the same subnet.</td>
   
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 560: Line 682:  
         <td>positive integer; default: <b>none</b> </td>
 
         <td>positive integer; default: <b>none</b> </td>
 
         <td>Association will be refused if a client/station attempts to associate with a listen interval greater than this value.</td>
 
         <td>Association will be refused if a client/station attempts to associate with a listen interval greater than this value.</td>
−
    </tr>
  −
    <tr>
  −
        <td>Disassociate On Low Acknowledgement</td>
  −
        <td>off {{!}} on; default: <b>on</b></td>
  −
        <td>Allow AP mode to disconnect stations/clients based on low Acknowledgement condition.</td>
   
     </tr>{{#switch:{{{series}}}|TAP100|TAP200=|#default=
 
     </tr>{{#switch:{{{series}}}|TAP100|TAP200=|#default=
 
     <tr>
 
     <tr>
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/117997...123812"