Changes

Template:Networking rutos manual wireless (view source)

Revision as of 15:31, 22 December 2023

1,204 bytes removed ,  15:31, 22 December 2023
no edit summary
Line 52: Line 52:  
|TAP100 =
 
|TAP100 =
 
|TAP200 =
 
|TAP200 =
−
|TCR1 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tcr1_v3.png|border|class=tlt-border]]
+
|TCR1 = [[File:Networking rutos manual wireless wifi 5 tcr1 v4.png|border|class=tlt-border]]
−
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = [[File:Networking rutos manual wireless wifi 2 v2 mixed.png|border|class=tlt-border]]
+
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = [[File:Networking rutos manual wireless wifi 2 v4 mixed.png|border|class=tlt-border]]
−
|#default = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_v4.png|border|class=tlt-border]]
+
|#default = [[File:Networking_rutos_manual_wireless_wifi_{{{wifi}}}_v4.png|border|class=tlt-border]]
 
}}
 
}}
   Line 67: Line 67:  
|TAP100 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tap100_v3.png|border|class=tlt-border]]
 
|TAP100 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tap100_v3.png|border|class=tlt-border]]
 
|TAP200 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tap200_v1.png|border|class=tlt-border]]
 
|TAP200 = [[File:Networking_rutos_manual_wireless_global_settings_edit_button_tap200_v1.png|border|class=tlt-border]]
−
|#default = [[File:Networking_rutos_manual_wireless_global_settings_general_setup_v2.png|border|class=tlt-border]]
+
|#default = [[File:Networking_rutos_manual_wireless_global_settings_general_setup_v3.png|border|class=tlt-border]]
 
}}
 
}}
   Line 144: Line 144:  
{{#switch:{{{series}}}
 
{{#switch:{{{series}}}
 
|TAP100|TAP200 = [[File:Networking_rutos_manual_wireless_global_settings_advanced_settings_tap100_v1.png|border|class=tlt-border]]
 
|TAP100|TAP200 = [[File:Networking_rutos_manual_wireless_global_settings_advanced_settings_tap100_v1.png|border|class=tlt-border]]
−
|#default =[[File:Networking_rutos_manual_wireless_global_settings_advanced_settings_v1.png|border|class=tlt-border]]
+
|#default =[[File:Networking_rutos_manual_wireless_global_settings_advanced_settings_v2.png|border|class=tlt-border]]
 
}}
 
}}
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 223: Line 223:  
     </tr>|}}
 
     </tr>|}}
 
</table>
 
</table>
−
  −
{{#switch:{{{series}}}|TAP100|TAP200= |#default= =====WiFi Scanner=====
  −
----
  −
The <b>WiFi Scanner</b> provides you with the possibility to scan and collect information about connected devices and surrounding access points. The collected data is sent using the [[{{{name}}} Data to Server|Data to Server]] functionality with Kinesis argument.
  −
{{#switch: {{{series}}}
  −
  | #default =
  −
  | RUT36X|RUT9|TCR1|RUT2|RUT2M|RUT9M = <u><b>Note:</b> WiFi Scanner is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.</u>
  −
}}
  −
[[File:Networking_rutos_manual_wireless_global_settings_wifi_scanner_v1.png|border|class=tlt-border]]
  −
  −
<table class="nd-mantable">
  −
    <tr>
  −
        <th>Field</th>
  −
        <th>Value</th>
  −
        <th>Description</th>
  −
    </tr>
  −
    <tr>
  −
      <td>Enable</td>
  −
      <td>off {{!}} on; default: <b>off</b></td>
  −
      <td>Enables or disables WiFi scanner.</td>
  −
    </tr>
  −
      <tr>
  −
      <td>Interval</td>
  −
      <td>integer; default: <b>10</b></td>
  −
      <td>Interval between scans in seconds.</td>
  −
    </tr>
  −
</table>}}
      
====Interface Configuration====
 
====Interface Configuration====
Line 255: Line 228:  
The <b>Interface Configuration</b> section is used to configure the parameters of Wireless Access Points{{#switch:{{{series}}}|TAP100|TAP200=|#default= or Clients}}. You can find this section by clicking the 'Edit' button next to a wireless device (<u>not an interface</u>) in the Network → SSIDs page:
 
The <b>Interface Configuration</b> section is used to configure the parameters of Wireless Access Points{{#switch:{{{series}}}|TAP100|TAP200=|#default= or Clients}}. You can find this section by clicking the 'Edit' button next to a wireless device (<u>not an interface</u>) in the Network → SSIDs page:
 
{{#switch: {{{name}}}
 
{{#switch: {{{name}}}
−
|#default = [[File:Networking_rutos_manual_wireless_interface_configuration_edit_button_v3.png|border|class=tlt-border]]
+
|#default = [[File:Networking_rutos_manual_wireless_wifi_{{{wifi}}}_v4.png|border|class=tlt-border]]
−
|TCR100 = [[File:Networking_rutos_manual_wireless_interface_configuration_edit_button_tcr1_v3.png|border|class=tlt-border]]
+
|TCR100 = [[File:Networking rutos manual wireless wifi 5 tcr1 v4.png|border|class=tlt-border]]
 
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_edit_button_tap100_v4.png|border|class=tlt-border]]
 
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_edit_button_tap100_v4.png|border|class=tlt-border]]
 
|TAP200 = [[File:Networking_rutos_manual_wireless_wifi_tap200_v1.png|border|class=tlt-border]]
 
|TAP200 = [[File:Networking_rutos_manual_wireless_wifi_tap200_v1.png|border|class=tlt-border]]
−
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = [[File:Networking rutos manual wireless interface configuration edit button mixed v2.png|border|class=tlt-border]]
+
|RUT241|RUT200|RUT951|RUT956|RUT906|RUT901 = [[File:Networking rutos manual wireless wifi 2 v4 mixed.png|border|class=tlt-border]]
 
}}
 
}}
 
=====General Setup=====
 
=====General Setup=====
Line 265: Line 238:  
The <b>General Setup</b> tab contains basic options for ESSID and network interface.
 
The <b>General Setup</b> tab contains basic options for ESSID and network interface.
 
{{#switch: {{{series}}}
 
{{#switch: {{{series}}}
−
|#default = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_v2.png|border|class=tlt-border]]
+
|#default = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_v3.png|border|class=tlt-border]]
−
|TCR1 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tcr1_v2.png|border|class=tlt-border]]
+
|TCR1 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tcr1_v3.png|border|class=tlt-border]]
 
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tap100_v3.png|border|class=tlt-border]]
 
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tap100_v3.png|border|class=tlt-border]]
 
|TAP200 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tap200_v1.png|border|class=tlt-border]]
 
|TAP200 = [[File:Networking_rutos_manual_wireless_interface_configuration_general_setup_tap200_v1.png|border|class=tlt-border]]
Line 416: Line 389:  
The <b>Wireless Security</b> tab is used to determine what kind of encryption your WLAN will use.  
 
The <b>Wireless Security</b> tab is used to determine what kind of encryption your WLAN will use.  
   −
[[File:Networking_rutos_manual_wireless_interface_configuration_wireless_security_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_wireless_interface_configuration_wireless_security_v3.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 505: Line 478:  
{{#switch:{{{series}}}
 
{{#switch:{{{series}}}
 
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_mac_filter_tap100_v1.png|border|class=tlt-border]]
 
|TAP100 = [[File:Networking_rutos_manual_wireless_interface_configuration_mac_filter_tap100_v1.png|border|class=tlt-border]]
−
|#default = [[File:Networking_rutos_manual_wireless_interface_configuration_mac_filter_v2.png|border|class=tlt-border]]}}
+
|#default = [[File:Networking_rutos_manual_wireless_interface_configuration_mac_filter_v3.png|border|class=tlt-border]]}}
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 540: Line 513:  
|TAP100 = [[File:Networking rutos manual wireless interface configuration advanced settings tap100_v1.png|border|class=tlt-border]]
 
|TAP100 = [[File:Networking rutos manual wireless interface configuration advanced settings tap100_v1.png|border|class=tlt-border]]
 
|TAP200 = [[File:Networking rutos manual wireless interface configuration advanced settings tap200_v1.png|border|class=tlt-border]]
 
|TAP200 = [[File:Networking rutos manual wireless interface configuration advanced settings tap200_v1.png|border|class=tlt-border]]
−
|#default = [[File:Networking rutos manual wireless interface configuration advanced settings access_point.png|border|class=tlt-border]]}}
+
|#default = [[File:Networking rutos manual wireless interface configuration advanced settings access_point_v1.png|border|class=tlt-border]]}}
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 611: Line 584:     
{{#switch:{{{series}}}|TAP100|TAP200 =
 
{{#switch:{{{series}}}|TAP100|TAP200 =
−
|#default = [[File:Networking rutos manual wireless interface configuration advanced settings client_multi_ap.png|border|class=tlt-border]]
+
|#default = [[File:Networking rutos manual wireless interface configuration advanced settings client_multi_ap_v1.png|border|class=tlt-border]]
 
<table class="nd-mantable">
 
<table class="nd-mantable">
 
     <tr>
 
     <tr>
Line 671: Line 644:     
{{#switch:{{{series}}}|TAP100|TAP200 =
 
{{#switch:{{{series}}}|TAP100|TAP200 =
−
|#default = [[File:Networking rutos manual wireless interface configuration advanced settings tap200 v1.png|border|class=tlt-border]]
+
|#default = [[File:Networking rutos manual wireless interface configuration mesh advanced settings v1.png|border|class=tlt-border]]
 
<table class="nd-mantable">
 
<table class="nd-mantable">
 
     <tr>
 
     <tr>
Line 739: Line 712:  
The <b>Fast Transition</b> tab is only available when in <b>General setup</b> section <b>802.11r Fast Transition</b> option is enabled.
 
The <b>Fast Transition</b> tab is only available when in <b>General setup</b> section <b>802.11r Fast Transition</b> option is enabled.
   −
[[File:Networking rutos manual wireless interface configuration fast transition settings.png|border|class=tlt-border]]
+
[[File:Networking rutos manual wireless interface configuration fast transition settings_v1.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 773: Line 746:  
The <b>Fast Roaming</b> tab is only available when in <b>General setup</b> section <b>Client</b> mode is selected and in <b>Advanced settings</b> tab <b>Enable fast roaming</b> option is enabled.
 
The <b>Fast Roaming</b> tab is only available when in <b>General setup</b> section <b>Client</b> mode is selected and in <b>Advanced settings</b> tab <b>Enable fast roaming</b> option is enabled.
   −
[[File:Networking rutos manual wireless interface configuration fast roaming settings.png|border|class=tlt-border]]
+
[[File:Networking rutos manual wireless interface configuration fast roaming settings_v1.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 817: Line 790:  
To begin configuring WiFi Client first click the 'Scan' button to scan the surrounding area and attempt to connect to a new wireless access point.
 
To begin configuring WiFi Client first click the 'Scan' button to scan the surrounding area and attempt to connect to a new wireless access point.
   −
[[File:Networking_rutos_manual_wireless_scan_button.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_wireless_scan_button_v1.png|border|class=tlt-border]]
    
After which you will be redirected to the window shown below, where you will see list of available WiFi Access Points in the area. Choose one according to your liking and press the '''Join Network''' button next to it.
 
After which you will be redirected to the window shown below, where you will see list of available WiFi Access Points in the area. Choose one according to your liking and press the '''Join Network''' button next to it.
Line 829: Line 802:  
Next window that opens will be '''Device Configuration'''. Values there, mostly, should be left unchanged to avoid connection problems, because they are dictated by Access Point. Other than that, only difference from Access Point settings are in ''Interface Configuration → General Setup'' section, where '''Mode''' is set to '''Client''', and '''Network''' attached to this wireless interface is '''wifi1''' instead of LAN
 
Next window that opens will be '''Device Configuration'''. Values there, mostly, should be left unchanged to avoid connection problems, because they are dictated by Access Point. Other than that, only difference from Access Point settings are in ''Interface Configuration → General Setup'' section, where '''Mode''' is set to '''Client''', and '''Network''' attached to this wireless interface is '''wifi1''' instead of LAN
   −
[[File:Networking_rutos_manual_wireless_scan_button_results_join_network_general_setup_v3.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_wireless_scan_button_results_join_network_general_setup_v4.png|border|class=tlt-border]]
    
Click '''Save & Apply''' and if you configured correctly, you will have Wireless Client working.
 
Click '''Save & Apply''' and if you configured correctly, you will have Wireless Client working.
Line 847: Line 820:  
To begin click the 'Add' button below of wireless interface in the Network → Wireless page:
 
To begin click the 'Add' button below of wireless interface in the Network → Wireless page:
   −
[[File:Networking rutos manual wireless mesh gateway add button v4.png|border|class=tlt-border]]
+
[[File:Networking rutos manual wireless mesh gateway add button v5.png|border|class=tlt-border]]
    
In '''General Setup''' tab change '''Mode''' to '''Mesh''', set '''Mesh ID''' (this number has to be the same in all nodes that connect to this wireless mesh network) and select desired '''Network''' which will be attached to the interface. Click '''Save & Apply'''.
 
In '''General Setup''' tab change '''Mode''' to '''Mesh''', set '''Mesh ID''' (this number has to be the same in all nodes that connect to this wireless mesh network) and select desired '''Network''' which will be attached to the interface. Click '''Save & Apply'''.
   −
[[File:Networking rutos manual wireless mesh gateway 1_v2.png|Networking rutos manual wireless mesh gateway general settings|border|class=tlt-border]]
+
[[File:Networking rutos manual wireless mesh gateway 1_v3.png|Networking rutos manual wireless mesh gateway general settings|border|class=tlt-border]]
    
Next navigate to '''Wireless Security''' tab and select '''WPA3-SAE''' encryption to add authentication layer. The password must match in all devices within the mesh network.
 
Next navigate to '''Wireless Security''' tab and select '''WPA3-SAE''' encryption to add authentication layer. The password must match in all devices within the mesh network.
   −
[[File:Networking rutos manual wireless mesh gateway 2_v2.png|Networking rutos manual wireless mesh gateway security|border|class=tlt-border]]
+
[[File:Networking rutos manual wireless mesh gateway 2_v3.png|Networking rutos manual wireless mesh gateway security|border|class=tlt-border]]
    
Lastly, in '''Advanced Settings''' tab enable '''Forward mesh peer traffic''' and set '''RSSI threshold for joining''' to -80. Leave the rest as set by default.
 
Lastly, in '''Advanced Settings''' tab enable '''Forward mesh peer traffic''' and set '''RSSI threshold for joining''' to -80. Leave the rest as set by default.
   −
[[File:Networking rutos manual wireless mesh gateway 3_v2.png|Networking rutos manual wireless mesh gateway advanced settings|border|class=tlt-border]]
+
[[File:Networking rutos manual wireless mesh gateway 3_v3.png|Networking rutos manual wireless mesh gateway advanced settings|border|class=tlt-border]]
    
Click '''Save & Apply''' and if you configured correctly, you will have wireless mesh gateway ready.
 
Click '''Save & Apply''' and if you configured correctly, you will have wireless mesh gateway ready.
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/117864"

Navigation menu