Difference between revisions of "Template:Networking rutx configuration examples printer server"
From Teltonika Networks Wiki
Line 21: | Line 21: | ||
<ol> | <ol> | ||
<li>Connect the printer to your router's USB port. Connect your computer to the router via Ethernet cable or wirelessly.</li><br> | <li>Connect the printer to your router's USB port. Connect your computer to the router via Ethernet cable or wirelessly.</li><br> | ||
− | <li>Login to the router's WebUI, go the <b>Services → [[{{{name}}} Printer_Server|Printer Server]]</b> page and configure the printer settings:<br>[[File:{{{file_printer_server}}}]]<br>Most importantly - <b>Enable</b> the printer.</li><br> | + | <li>Login to the router's WebUI, go the <b>Services → USB Tools → [[{{{name}}} USB Tools#Printer_Server|Printer Server]]</b> page and configure the printer settings:<br>[[File:{{{file_printer_server}}}]]<br>Most importantly - <b>Enable</b> the printer.</li><br> |
<li>Open the Printers & scanners page on your PC. Click the Add a printer or scanner button and wait until the note "The printer that I want isn't listed" appears; click it:<br>[[File:{{{file_windows_1}}}]]</li> | <li>Open the Printers & scanners page on your PC. Click the Add a printer or scanner button and wait until the note "The printer that I want isn't listed" appears; click it:<br>[[File:{{{file_windows_1}}}]]</li> | ||
<li>In the following window choose TCP/IP address option and click Next.</li><br> | <li>In the following window choose TCP/IP address option and click Next.</li><br> |
Revision as of 14:34, 1 July 2020
Introduction
This article provides step-by-step instructions on how to set up and utilize a printer connected to the USB port of a {{{name}}} router.
The information in this page is updated in accordance with the [[Media:{{{fw_version}}}_WEBUI.bin|{{{fw_version}}}]] firmware version.
Prerequisites
You will need:
- an RUTX router running FW version RUTX_R_00.02.3 or newer ([[{{{name}}}_Firmware_Downloads|FW downloads]]);
- a computer running Windows 10 OS;
- a USB A to B printer cable.
Instructions
- Connect the printer to your router's USB port. Connect your computer to the router via Ethernet cable or wirelessly.
- Login to the router's WebUI, go the Services → USB Tools → [[{{{name}}} USB Tools#Printer_Server|Printer Server]] page and configure the printer settings:
[[File:{{{file_printer_server}}}]]
Most importantly - Enable the printer. - Open the Printers & scanners page on your PC. Click the Add a printer or scanner button and wait until the note "The printer that I want isn't listed" appears; click it:
[[File:{{{file_windows_1}}}]] - In the following window choose TCP/IP address option and click Next.
- Select Device type: TCP/IP Device, enter the router's LAN IP address and port name. For example:
[[File:{{{file_windows_2}}}]] - In the next window, select Device Type: Standard, find and select your printer's manufacturer from the dropdown:
[[File:{{{file_windows_3}}}]] - Select your printer from the list:
[[File:{{{file_windows_4}}}]] - Next, the PC will look printer drivers. If the drivers for your printer have been installed prior, you can choose the option to replace them or use the currently installed drivers.
- In the next two windows you will be asked you to enter a custom name for the printer and set up sharing rights. The very last window will provide the option to print a test page in order to find out if the printer was set up successfully. If you choose it and see a test page coming out of your printer - congratulations, you have just successfully set up your printer!
[[Category:{{{name}}} Configuration Examples]]