9,567
edits
Changes
Template:Networking rutx manual device recovery bootloader (view source)
Revision as of 16:37, 14 December 2021
, 16:37, 14 December 2021→Bootloader menu
</ul>
</ul>
If you followed all the steps correctly, Ethernet LEDs should start lighting up and turning OFF one after the other, from WAN port to LAN1 port. This means that the router is in the bootloader menu state. If that is not the case, repeat the steps again.
If you followed all the steps correctly, all panel LEDs should light up. This means that the router is in the bootloader menu state. If that is not the case, repeat the steps again.
At this point you should be able to reach the router's HTTP server via this address:
At this point you should be able to reach the router's HTTP server via this address: