31,703
edits
Changes
Template:Networking rutx manual input output (view source)
Revision as of 14:44, 16 April 2020
, 14:44, 16 April 2020no edit summary
<ul>
<ul>
<li>logic low: 0 - 5 V</li>
<li>logic low: 0 - 5 V</li>
<li>logic high: 8 - 40 V></li>
<li>logic high: 8 - 40 V</li>
</ul>
</ul>
</li>
</li>
==Status==
==Status==
The <b>Status</b> page displays the current states of the input and the output:
The <b>Status</b> page displays the current states of the router's input and output:
[[File:{{{file_status}}}]]
[[File:{{{file_status}}}]]
<td>Trigger</td>
<td>Trigger</td>
<td>Input open | Input shorted | Both; default: <b>Input open</b></td>
<td>Input open | Input shorted | Both; default: <b>Input open</b></td>
<td>Selects which input state triggers the rule.</td>
<td>Selects which input state will trigger the rule.</td>
</tr>
</tr>
<tr>
<tr>
<td>Action</td>
<td>Action</td>
<td>{{#ifeq:{{{modem}}}|1|Send SMS {{!}} |}} Change profile | Reboot | Activate output; default: <b>Send SMS</b></td>
<td>{{#ifeq:{{{modem}}}|1|Send SMS {{!}} |}} Change profile | Reboot | Activate output; default: <b>Send SMS</b></td>
<td>The action that will be taken when the rule is triggered:
<td>The action that will be taken when the rule is triggered.
<ul>
<ul>
{{#ifeq:{{{modem}}}|1|{{Template:Networking_rutx_manual_input_output_input_input_rules_modem}}|}}
<li><b>Change profile</b> - switches to another configuration profile. At least one configuration profile has to be created before this can be used. You can create configuration profiles from the <b>System → [[{{{name}}} Profiles|Profiles]]</b> page.</li>
<li><b>Change profile</b> - switches to another configuration profile. At least one configuration profile has to be created before this can be used. You can create configuration profiles from the <b>System → [[{{{name}}} Profiles|Profiles]]</b> page.</li>
<li><b>Reboot</b> - reboots the device when a specified amount of time passes after the trigger.</li>
<li><b>Reboot</b> - reboots the device when a specified amount of time passes after the trigger.</li>
<table class="nd-othertables_2">
<table class="nd-othertables_2">
<tr>
<tr>
<th style="width: 500px">ACTION</th>
<th style="width: 500px">Action</th>
<th style="width: 900px">POST/GET URL EXAMPLE</th>
<th style="width: 900px">POST/GET URL</th>
</tr>
</tr>
<tr>
<tr>
<td>Output</td>
<td>Output</td>
<td>Digital output (pin2); default: <b>Digital output (pin2)</b></td>
<td>Digital output (pin2); default: <b>Digital output (pin2)</b></td>
<td>Output that will be affected by the rule.</td>
<td>The output pin that will be be effected by the rule.</td>
</tr>
</tr>
<tr>
<tr>
<td>Mode</td>
<td>Mode</td>
<td>Fixed | Interval; default: <b>Fixed</b></td>
<td>Fixed | Interval; default: <b>Fixed</b></td>
<td>
<td>When the rule will be triggered.
<ul>
<ul>
<li><b>Fixed</b> - triggers the specified action on the specified day(s), hour and minute. For example, every Sunday at 8:30 AM.</li>
<li><b>Fixed</b> - triggers the specified action on the specified day(s), hour and minute. For example, every Sunday at 8:30 AM.</li>
<li><b>Interval</b> - performs the action periodically. For example, every 1 hour.</li>
<li><b>Interval</b> - performs the action at an interval. For example, every 1 hour during Mondays.</li>
</ul>
</ul>
</td>
</td>
===Scheduler===
===Scheduler===
----
----
With the help of the output <b>Scheduler</b> you can configure a timetable of when the output should be enabled or disabled, based on date and time.
With the help of the output <b>Scheduler</b> you can configure a timetable of when the output should be enabled or disabled based on date and time.
[[File:{{{file_output_scheduler}}}]]
[[File:{{{file_output_scheduler}}}]]
[[Category:{{{name}}} WebUI]]
[[Category:{{{name}}} Services section]]
