Difference between revisions of "Template:Networking rutx manual input output status"
From Teltonika Networks Wiki
(Created page with " ioman.gpio.dio0 ioman.gpio.dio1 Call command <b>ubus call <u>value</u> status </b>: root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.dio0 status { "value": "0",...") |
|||
| Line 1: | Line 1: | ||
| − | ioman.gpio. | + | ioman.gpio.din1 - 4PIN input |
| − | ioman.gpio. | + | ioman.gpio.dout1 - 4PIN output |
Call command <b>ubus call <u>value</u> status </b>: | Call command <b>ubus call <u>value</u> status </b>: | ||
| − | root@Teltonika-{{{name}}}:~# ubus call ioman.gpio. | + | root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.din1 status |
{ | { | ||
"value": "0", | "value": "0", | ||
Revision as of 13:39, 21 June 2021
ioman.gpio.din1 - 4PIN input ioman.gpio.dout1 - 4PIN output
Call command ubus call value status :
root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.din1 status
{
"value": "0",
"direction": "in",
"bi_dir": false,
"invert_input": false
}
- din1 is the input:
- "value": "0" means low level state.
- "value": "1" means high level state.
- dout1 is the output:
- "value": "0" means low level state.
- "value": "1" means high level state.
