476
edits
Changes
Template:Networking rutxxx configuration example cli cisko gre (view source)
Revision as of 15:27, 16 April 2020
, 15:27, 16 April 2020→Prerequisites
* One RUTxxx router
* One RUTxxx router
* One Cisco router (this configuration example was created using Cisco 7200 Series Router)
* One Cisco router (this configuration example was created using Cisco ISR4321 Router)
* A PC to configure the routers
* A PC to configure the routers
* PuTTy or similiar terminal program
* PuTTy or similiar terminal program
# Set '''Local GRE interface IPv4 address''' to 172.16.0.1
# Set '''Local GRE interface IPv4 address''' to 172.16.0.1
# Enter '''Local GRE interface netmask''' - 255.255.255.0
# Enter '''Local GRE interface netmask''' - 255.255.255.0
# When creating new GRE interface you will first have to '''Add''' in '''Routing Settings''' before entering following information.
# When creating new GRE interface you will first have to press '''Add''' in '''Routing Settings''' before entering following information.
# Enter '''Remote subnet IP address''' - 192.168.5.0
# Enter '''Remote subnet IP address''' - 192.168.5.0
# Enter '''Remote subnet netmask''' - 255.255.255.0
# Enter '''Remote subnet netmask''' - 255.255.255.0