Changes

==CLI/SSH Router configuration==

==CLI/SSH Router configuration==

For the next part you will be configuring router via SSH. For this you need to use the command line interface (CLI) or a SSH software if you’re using Windows or iOS. In this example software '''“putty”''' will be used. Open “putty” enter routers LAN IP address and press '''“Open”'''.<br>

For the next part you will be configuring router via SSH. For this you need to use the command line interface (CLI) or a SSH software if you’re using Windows or iOS. In this example software '''“putty”''' will be used. Open “putty” enter routers LAN IP address and press '''“Open”'''.<br>

[[File:LAN TO WAN06.jpg|border|class=tlt-border|400px]]

[[File:LANASWAN005.jpg|border|class=tlt-border]]

After clicking '''“Open”''' you will need to enter router credentials.

After clicking '''“Open”''' you will need to enter router credentials.

<li>Login as: '''root'''</li>

<li>Login as: '''root'''</li>

<li>Password: routers admin password (by default admin01)</li>

<li>Password: routers admin password (by default admin01)</li>

[[File:LAN TO WAN07.jpg|border|class=tlt-border|400px]]<br>

[[File:LANASWAN06.jpg|border|class=tlt-border]]

<br>

Now when you are connected you will need to make changes to network settings, this will be

Now when you are connected you will need to make changes to network settings, this will be

<li>option backup '1'</li>

<li>option backup '1'</li>

<li>option metric '10'</li>

<li>option metric '10'</li>

[[File:LAN TO WAN08.jpg|border|class=tlt-border|400px]]<br>

[[File:LANASWAN006.jpg|border|class=tlt-border]]

<br>

Press '''Esc''' and write ''':wq'''.

Press '''Esc''' and write ''':wq'''.

After that you will need to restart network service on the router, for this use command:

After that you will need to restart network service on the router, for this use command:

<li>'''/etc/init.d/network restart'''</li><br>

<li>'''/etc/init.d/network restart'''</li><br>

[[File:LAN TO WAN09.jpg|border|class=tlt-border|400px]]<br>

[[File:LANASWAN007.jpg|border|class=tlt-border]]

<br>

After restart is completed go back to routers WebUI and navigate to '''Network -> Firewall -> General Settings'''.

After restart is completed go back to routers WebUI and navigate to '''Network -> Firewall -> General Settings'''.

Scroll down, in '''Zone Forwarding''' find source zone '''lan_wan''' and change “Default forwarding action” from '''reject''' to '''accept''' and also check '''Masquerading''' and save settings.<br>

Scroll down, in '''Zone Forwarding''' find source zone '''lan_wan''' and change “Default forwarding action” from '''reject''' to '''accept''' and also check '''Masquerading''' and save settings.<br>

[[File:LAN TO WAN10.jpg|border|class=tlt-border|400px]]<br>

[[File:LANASWAN08.jpg|border|class=tlt-border]]

<br>

==Testing the configuration==

==Testing the configuration==

If you did the steps in the right way, your end device should have internet connection according the scheme.<br>

If you did the steps in the right way, your end device should have internet connection according the scheme.<br>

[[Category:{{{name}}} Configuration Examples]]

[[Category:{{{name}}} Configuration Examples]]