Line 44: |
Line 44: |
| command in SSH:<br> | | command in SSH:<br> |
| <li>'''vi /etc/config/network''' press latter '''i''' to be able to edit.</li> | | <li>'''vi /etc/config/network''' press latter '''i''' to be able to edit.</li> |
− | ===Using DHCP=== | + | ===DHCP=== |
| ---- | | ---- |
− | Using the arrow keys on your keyboard, navigate and find '''config interface 'lan_wan'''' erase the current configuration and write these options: | + | Using the arrow keys on your keyboard, navigate and find <i>config interface 'lan_wan'</i> erase the current configuration and write these options: |
− | <li>'''option proto 'dhcp''''</li>
| + | |
− | <li>'''option ifname 'eth0.1''''</li>
| + | option proto 'dhcp' |
− | <li>'''option backup '1''''</li>
| + | option ifname 'eth0.1' |
− | <li>'''option metric '10''''</li>
| + | option backup '1' |
− | [[File:Networking_rutxxx_configuration_examples_use_lan_as_wan_4_v1.png]]<br> | + | option metric '10' |
− | ===Using Static IP=== | + | |
| + | [[File:Networking_rutxxx_configuration_examples_use_lan_as_wan_4_v1.png]] |
| + | |
| + | ===Static IP=== |
| ---- | | ---- |
− | Using arrows navigate and find '''config interface 'lan_wan'''' leave the current configuration and add these four options: | + | Using arrows navigate and find <i>config interface 'lan_wan'</i> leave the current configuration and add these four options: |
− | <li>'''option gateway '192.168.10.1''''</li>
| + | |
− | <li>'''option dns '8.8.8.8''''</li>
| + | option gateway '192.168.10.1' |
− | <li>'''option backup '1''''</li>
| + | option dns '8.8.8.8' |
− | <li>'''option metric '10''''</li>
| + | option backup '1' |
− | [[File:Networking_rutxxx_configuration_examples_use_lan_as_wan_5_v1.png]]<br> | + | option metric '10' |
− | After that you will need to go out of the '''vi.'''
| + | |
− | <li>Press '''ESC''', write ''':wq''' and press '''Enter''' | + | [[File:Networking_rutxxx_configuration_examples_use_lan_as_wan_5_v1.png]] |
− | Restart the network service on the router, for this use command:
| + | ---- |
− | <li>'''/etc/init.d/network restart'''</li><br>
| + | To exit the "vi" editor, press the "Esc" key, type in <i>:wq</i> and hit "Enter". While still on the command line, restart the <i>network</i> service on the router - this will apply the changes made to the configuration. Use this command: |
− | After restart is completed go back to routers WebUI and navigate to '''Network -> Firewall -> General Settings'''.
| + | |
− | Scroll down, in '''Zone Forwarding''' find source zone '''lan_wan''' and change “Default forwarding action” from '''reject''' to '''accept''' and also check '''Masquerading''' and save settings.<br> | + | /etc/init.d/network restart |
− | [[File:Networking_rutxxx_configuration_examples_use_lan_as_wan_6_v1.png|border|class=tlt-border]]<br><br> | + | |
| + | Next go back to the WebUI and navigate to <i>Network → Firewall → <b>General Settings</b></i> page. Scroll down to the "Zone Forwarding" section to find source zone 'lan_wan' and change the following: |
| + | |
| + | <ul> |
| + | <li><b>Default forwarding action</b>: accept</li> |
| + | <li><b>Masquerading</b>: on</li> |
| + | <li><b>Save</b> changes</li> |
| + | </ul> |
| + | |
| + | [[File:Networking_rutxxx_configuration_examples_use_lan_as_wan_6_v1.png|border|class=tlt-border]] |
| + | |
| ==Testing the configuration== | | ==Testing the configuration== |
| If you did the steps in the right way, your end device should have internet connection according the scheme.<br> | | If you did the steps in the right way, your end device should have internet connection according the scheme.<br> |