Template:Networking trb14x first start device configuration

From Teltonika Networks Wiki
Revision as of 10:24, 19 February 2019 by Dziugas (talk | contribs) (Created page with "==Device configuration== 1. Power on the device and connect the USB cable to your computer. <br> 2. Allow the gateway to boot up. This might take up to 30 s. <br> 3. Your com...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Device configuration

1. Power on the device and connect the USB cable to your computer.
2. Allow the gateway to boot up. This might take up to 30 s.
3. Your computer's OS should detect the USB device and install the drivers for the virtual NDIS network adapter. IP address is set automatically via DHCP.
4. Use a Web browser to go to gateway's default address: http://192.168.2.1
5. Use the following credentials to login:
Tr142 qsg device configuration 1 v2.png
6. Go to the WebUI's Status → Overview page to check the signal strength:
Tr142 qsg device configuration 2 v2.png