9,312
edits
Changes
Template:Networking trb2 manual input output status (view source)
Revision as of 08:12, 19 August 2021
, 08:12, 19 August 2021no edit summary
<pre>
<pre>
ioman.adc.adc0
ioman.adc.adc0 - Analog input
ioman.gpio.dio0
ioman.gpio.dio0 - Configurable input/output (PIN2)
ioman.gpio.dio1
ioman.gpio.dio1 - Configurable input/output (PIN3)
ioman.gpio.dio2
ioman.gpio.dio2 - Configurable input/output (PIN4)
</pre>
</pre>
<li>"value": "<b>0</b>" means low level state.</li>
<li>"value": "<b>0</b>" means low level state.</li>
<li>"value": "<b>1</b>" means high level state.</li>
<li>"value": "<b>1</b>" means high level state.</li>
<li>"direction": "<b>in</b>" means input state.</li>
<li>"direction": "<b>out</b>" means output state.</li>
</ul>
</ul>
</li>
</li>
</li>
</li>
</ul>
</ul>
To change input settings, use the <i><b>update</i></b> command and specify a value:
ubus call ioman.gpio.dio0 update '{"value":"0"}'
ubus call ioman.gpio.dio0 update '{"value":"1"}'
ubus call ioman.gpio.dio0 update '{"direction":"in"}'
ubus call ioman.gpio.dio0 update '{"direction":"out"}'
