Difference between revisions of "Template:Networking trb manual powering options"
(Created page with "This chapter contains information on <b>powering options</b> supported by {{{name}}} devices. __TOC__ ==Power socket== The device has a 4 pin power socket and can be powered...") |
m (Protected "Template:Networking trb14x manual powering options" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
(No difference)
| |
Revision as of 10:24, 7 March 2019
This chapter contains information on powering options supported by {{{name}}} devices.
Power socket
The device has a 4 pin power socket and can be powered by a 9-30 VDC power supply unit (PSU). Refer to the table below for the power socket's pinout information:
If you decide not to use our standard 9 VDC wall adapters and want to power the device from a higher voltage (15-30 VDC) please make sure that you choose a power supply of high quality. Some power supplies can produce voltage peaks significantly higher than the declared output voltage, especially during connection and disconnection.
While the device is designed to accept input voltage of up to 30 VDC peaks, high voltage power supplies can harm the device. If you want to use high voltage power supplies it is recommended to also use additional safety equipment to suppress voltage peaks from the power supply.
