Template:Rms manual management commands reboot

From Teltonika Networks Wiki
Revision as of 15:41, 2 December 2022 by JustasB (talk | contribs) (→‎Reboot)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Reboot

To Reboot device(s) selected from your device table go to the RMS web page, Left sidebar panel, (Management → Devices) and click on Devices submenu.

Move your mouse pointer to the Top control Actions menu and select Reboot (Actions → Reboot).

The Reboot function is used to reboot devices selected from your device table.


Instructions


  1. Select the device(s) that you wish to reboot.
  2. Move your mouse pointer to the Actions menu and click Reboot.
  3. You will get a pop-up asking whether you really want to reboot the selected device(s). If you're ready to proceed, click Yes.
  4. The next pop-up box will display the status of each device.

If the reboot is successful in the Status column you will you will get a message: Successfully Rebooted device.

Important!

  • Your device(s) will be unreachable for a few minutes and shown as (Offline) in RMS.
  • When the red circle (Offline) will change to green circle (Online) the device(s) have been rebooted and now are fully operational.