Template:Rms manual management commands update fw

From Teltonika Networks Wiki
Revision as of 11:55, 11 May 2018 by Dziugas (talk | contribs) (Created page with "The '''Update FW''' function is used to update the firmware(s) of devices selected from your device table. ---- * To update the firmware(s) of a device(s), first select the d...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

The Update FW function is used to update the firmware(s) of devices selected from your device table.


  • To update the firmware(s) of a device(s), first select the device(s) that you wish to update:

How to update fw from rms part 1 v3.png


  • Scroll your mouse pointer to the Commands submenu (Management → Commands) and click "Update FW":

How to update fw from rms part 2 v5.png


  • Choose a firmware that was previously uploaded to RMS (RMS Files: FW files) or click the "Choose file icon.png Choose a file..." button to upload a firmware file from your computer and click "Submit":

How to update fw from rms part 3 v1.png


  • You will be prompted to confirm the firmware update. Click "Yes" if you wish to proceed:

How to update fw from rms part 4 v1.png


  • Allow some time for the firmware to be uploaded into the router (progress will be shown under the "Event" field) until a green check mark shows up with the text "This router won't be reachable for few minutes" next to it. You can then close the pop-up box:

How to update fw from rms part 5 v1.png


  • Your router(s) will be unreachable for a few minutes and will thus be shown as "Offline". The power button symbols located next to each device in the device table indicate the monitoring status of these devices. When it turns green, the firmware updates will have finished and the router(s) will be seen as "Online" in RMS:

How to update fw from rms part 6 v2.png