Changes

Using '''Upload backup''' option you can upload configuration (backup) file for your selected device(s). To upload files go to the RMS web page, Left sidebar panel, (<b>Management → Overview</b>) and click on <b>Overview</b> submenu.

Using '''Upload backup''' option you can upload configuration (backup) file for your selected device(s). To upload files go to the RMS web page, Left sidebar panel, (<b>Management → Devices</b>) and click on <b>Devices</b> submenu.

Move your mouse pointer to the Top control '''Actions''' menu and select '''Upload backup''' (Actions → Upload backup).

Move your mouse pointer to the Top control '''Configuration''' menu and select '''Upload backup''' (Configuration → Upload backup).

[[File:RMS-device-menu-left-sidebar-panel.jpg]] [[File:RMS-top-menu-configuration-upload-backup.jpg]]

[[File:RMS-device-menu-left-sidebar-panel.jpg]] [[File:RMS-top-menu-configuration-upload-backup.jpg]]

The '''Upload backup''' option provides you with the ability to upload configuration files to devices registered on your RMS profile.

The '''Upload backup''' option provides you with the ability to upload configuration files to devices registered on your RMS profile.

----

----

* Select the device(s) that will receive the uploaded configuration file:

Read the instructions to learn how to upload configuration (backup) for your device(s).

[[File:How to upload config to device in rms part 1 v1.png|1150px]]

# Select the device(s) that will upload configuration (backup) file to.

# Move your mouse pointer to the '''Configuration''' menu and click '''Upload backup'''.

* Scroll your mouse pointer to the Configuration submenu ('''Management → Configuration''') and click "Upload":

# After a pop-up window will appear. Select the configuration file you've uploaded to RMS previously from a drop-down menu. And click '''Select''' button.

 

# In the next window will display configuration upload progress.

[[File:How to upload config to device in rms part 5 v2.png]]

# After the configuration (backup) is uploaded in the Status column you will you will get a message: '''<span style="color:#6CAF8F">✔</span> Done'''.  

----

* Select a configuration file either from the ones you've uploaded to RMS before or from your computer:

 

[[File:How to upload config to device in rms part 2 v1.png]]

 

'''NOTE''': you can only load a configuration file that was downloaded from the same type of router with the same firmware version.

* You will be prompted to confirm the procedure. If you are ready to proceed, click "Yes":

 

[[File:How to upload config to device in rms part 3 v1.png]]

* The next pop-up will show the status of the process. When you see a green check mark and the text "This router wont' be reachable for few minutes" under the "Event" field, your configuration will have been uploaded and at that point you can close the pop-up box: 

 

[[File:How to upload config to device in rms part 4 v1.png]]

Your configuration will be applied in a few minutes.

* Allow some time for your device(s) to load new configuration. They wont be reachable for up to 1 minute.

* When the <span style="color:#BC5265">⬤</span> red circle ('''Offline''') will change to <span style="color:#6CAF8F">⬤</span> green circle ('''Online''') configuration got uploaded and device(s) are fully operational.