Changes

[[File:Add device list to rms part 1 v1.PNG]]

[[File:Add device list to rms part 1 v1.PNG]]

----

----

* When you're done, don't save the file as is. Instead click click the "Save As" option. Then next to "Save as type" choose "All Files" and add the '''.csv''' extension next to the file name (if you're using Linux, you can just add the same extension to the file name after saving the file the regular way):

* When you're done, do not save the file as is. Instead click click the "Save As" option. Then next to "Save as type" choose "All Files" and add the '''.csv''' extension next to the file name (if you're using Linux, you can just add the same extension to the file name after saving the file the regular way):

[[File:How to save as csv.PNG]]

[[File:How to save as csv.PNG]]

[[File:Add device list to rms part 4 v1.png]]

[[File:Add device list to rms part 4 v1.png]]

----

----

* Don't forget to '''enable remote monitoring''' on the devices that you are trying to add. To do so, go to the router's WebUI and navigate to '''System → Administration → RMS''' and place a check mark next to the "Enable remote monitoring" field. This can be done either before or after clicking "Add device list" and '''must''' be done for each device that you are trying to add:

* Don't forget to '''enable remote monitoring''' on the devices that you are trying to add. To do so, go to the router's WebUI and navigate to '''System → Administration → RMS''' and place a check mark next to the "Enable remote monitoring" field (detailed instruction provided '''[[How to enable remote access for RMS on the router?|here]]'''). This can be done either before or after clicking "Add device list" and '''must''' be done for each device that you are trying to add:

[[File:Add device to rms part 1 v3.png]]

[[File:Add device to rms part 1 v3.png]]