5,754
edits
Changes
Template:Setting up iptv using rutxx router template (view source)
Revision as of 12:57, 8 April 2020
, 12:57, 8 April 2020→Network topology
==Introduction==
==Introduction==
Nowadays almost all people around the globe uses IPTV which is provided through their internet service provider. In a lot of cases, ISP (internet service provider) insist that you should use their router. The problem with those routers is that the usage of them is limited but you want to have more functionality then they provide. You start using other routers, but you can’t get IPTV to work. The question is how to do that? In this tutorial we want to show how it’s easy to set up IPTV using RUTX series routers.
Nowadays almost all people around the globe uses IPTV which is provided through their internet service provider. In a lot of cases, ISP (internet service provider) insist that you should use their router. The problem with those routers is that the usage of them is limited but you want to have more functionality then they provide. You start using other routers, but you can’t get IPTV to work. The question is how to do that? In this tutorial we want to show how it’s easy to set up IPTV using RUTX series routers.
===Network topology===
===Network topology===
[[File:{{{network_topology}}}|border|class=tlt-border]]
===Suggestions===
===Suggestions===
==Step 2: Configure VLANs==
==Step 2: Configure VLANs==
When <b>WAN</b> configuration is done, it’s time to configure VLAN’s. VLAN configuration can be found by navigating to “Network→VLAN”. You should see a page like in the picture below.
When <b>WAN</b> configuration is done, it’s time to configure VLAN’s. <b>VLAN</b> configuration can be found by navigating to “Network→VLAN”. You should see a page like in the picture below.
[[File:{{{vlan_settings_page}}}|border|class=tlt-border]]
[[File:{{{vlan_settings_page}}}|border|class=tlt-border]]
----
----
Now press the “ADD” button, which is located in the “VLANS ON SWITCH0” section.
Now press the “<b>ADD</b>” button, which is located in the “<b>VLANS ON SWITCH0</b>” section.
[[File:{{{vlan_section_add}}}|border|class=tlt-border]]
[[File:{{{vlan_section_add}}}|border|class=tlt-border]]
A new row should appear in the “VLANS ON SWITCH0” section.
A new row should appear in the “<b>VLANS ON SWITCH0</b>” section.
[[File:{{{vlan_section_configuration}}}|border|class=tlt-border]]
[[File:{{{vlan_section_configuration}}}|border|class=tlt-border]]
</li>
</li>
After changing the values press the "'''SAVE & APPLY'''" button for our configuration to take effect.
After changing the values press the "<b>SAVE & APPLY</b>" button for our configuration to take effect.
----
----
<b>NOTICE:</b>
Different ISP will provide IPTV service on different VLAN ID. In our case the ID number is 6.
Different ISP will provide IPTV service on different VLAN ID. In our case the ID number is 6.
The “untagged” port can be only one in the column.
The “<b>untagged</b>” port can be only one in the column.
----
VLAN configuration is now done. If you need a more detailed explanation about VLANs, you can find it [[RUTX10_VLAN|here]].
VLAN configuration is now done. If you need a more detailed explanation about VLANs, you can find it [[RUTX10_VLAN|here]].
[[File:{{{lan_interface_configurated}}}|border|class=tlt-border]]
[[File:{{{lan_interface_configurated}}}|border|class=tlt-border]]
----
If you need a more detailed explanation about LANs, you can find it [[RUTX10_LAN|here]].
If you need a more detailed explanation about LANs, you can find it [[RUTX10_LAN|here]].