Changes

'''Topology 1''':

'''Topology 1''':

[[File:Tinctopo1.png|alt=]]

[[File:Tinctopo1.png|alt=|660x660px]]

The figure above depicts two RUTxxx routers (RUT1 and RUT2) connected by an tinc tunnel via the Internet.

The figure above depicts two RUTxxx routers (RUT1 and RUT2) connected by an tinc tunnel via the Internet.

'''Topology 2''':

'''Topology 2''':

[[File:Tinctopo2.png|alt=]]

[[File:Tinctopo2.png|alt=|669x669px]]

As mentioned earlier, configuration scheme 2 (figure above) is an extension of configuration scheme 1. While configuration scheme 1 only depicts a connection between two tinc instances, you can see that configuration scheme 2 includes additional two end devices (END1 and END2), each connected to a separate router's LAN. When this topology is set up, not only will the two routers be able to communicate with each other, but the end devices will also be reachable to one another and from each router.

As mentioned earlier, configuration scheme 2 (figure above) is an extension of configuration scheme 1. While configuration scheme 1 only depicts a connection between two tinc instances, you can see that configuration scheme 2 includes additional two end devices (END1 and END2), each connected to a separate router's LAN. When this topology is set up, not only will the two routers be able to communicate with each other, but the end devices will also be reachable to one another and from each router.