Difference between revisions of "User Scripts examples"
From Teltonika Networks Wiki
Tags: Mobile edit Mobile web edit |
|||
| Line 5: | Line 5: | ||
This article will provide some examples on the usage of User Scripts. Although it must be noted that one should be at least be partially familiar with the syntax and basic principles of shell scripts beforehand as this guide will not provide a tutorial on shell scripts themselves. | This article will provide some examples on the usage of User Scripts. Although it must be noted that one should be at least be partially familiar with the syntax and basic principles of shell scripts beforehand as this guide will not provide a tutorial on shell scripts themselves. | ||
| − | = | + | #!/bin/ash |
| − | + | HOST=10.10.10.10 | |
| − | + | if ping -c5 $HOST > /dev/null; then | |
| + | echo "$HOST responded; VPN is up!" | ||
| + | else | ||
| + | echo "$HOST did not respond; trying to restart VPN" | ||
| + | /usr/sbin/ipsec restart | ||
==Example 2: filtering SMS messages== | ==Example 2: filtering SMS messages== | ||
Revision as of 23:25, 12 April 2022
Introduction
User Scripts is a service in RUT routers that provides the user with the possibility to create custom shell scripts that run at the end of router's boot process.
This article will provide some examples on the usage of User Scripts. Although it must be noted that one should be at least be partially familiar with the syntax and basic principles of shell scripts beforehand as this guide will not provide a tutorial on shell scripts themselves.
- !/bin/ash
HOST=10.10.10.10 if ping -c5 $HOST > /dev/null; then
echo "$HOST responded; VPN is up!"
else
echo "$HOST did not respond; trying to restart VPN" /usr/sbin/ipsec restart
Example 2: filtering SMS messages
