Changes

VLAN: Tag-Based RUTOS (view source)

Revision as of 19:21, 12 August 2022

825 bytes added ,  19:21, 12 August 2022
no edit summary
Line 16: Line 16:  
[[File:Networking_rut_manual_vlan_tagged_based_device_settings_lan_creation_v1.png|border|class=tlt-border]]
 
[[File:Networking_rut_manual_vlan_tagged_based_device_settings_lan_creation_v1.png|border|class=tlt-border]]
   −
The configuration window will appear, for "protocol" select Static.
+
The configuration window will appear, in the "Protocol" drop-down box select Static.
    
[[File:Networking_rut_manual_vlan_tagged_based_device_settings_lan_protocol_v1.png|border|class=tlt-border]]
 
[[File:Networking_rut_manual_vlan_tagged_based_device_settings_lan_protocol_v1.png|border|class=tlt-border]]
Line 75: Line 75:       −
To further test if the changes were successful, download the Realtek Ethernet Diagnostic Utility.
+
'''To further test if the changes were successful, download the Realtek Ethernet Diagnostic Utility.'''
      Line 82: Line 82:        +
Change your wired connection from your PC to Ethernet Port 3 on the Router.
 +
 +
Open the Realtek Ethernet Diagnostic Utility application on your pc.  Click on "Realtek PCIe Gbe Family Controller"
    
[[File:Networking_rut_manual_vlan_tagged_based_device_settings_realtek_setting_v1.png|border|class=tlt-border]]
 
[[File:Networking_rut_manual_vlan_tagged_based_device_settings_realtek_setting_v1.png|border|class=tlt-border]]
   −
 
+
Select on "VLAN"
    
[[File:Networking_rut_manual_vlan_tagged_based_device_settings_realtek_vlan_v1.png|border|class=tlt-border]]
 
[[File:Networking_rut_manual_vlan_tagged_based_device_settings_realtek_vlan_v1.png|border|class=tlt-border]]
   −
 
+
Type "VLAN ID 2" to the box on the right and click "Add" at the bottom. 
 +
''If done correctly this will cause you to lose network service since VLAN 2 is not added to LAN Port 3''
    
[[File:Networking_rut_manual_vlan_tagged_based_device_settings_realtek_vlan_id2_v1.png|border|class=tlt-border]]
 
[[File:Networking_rut_manual_vlan_tagged_based_device_settings_realtek_vlan_id2_v1.png|border|class=tlt-border]]
   −
 
+
Delete VLAN ID 2 from the Utility and add VLAN ID 3.
 +
''Your network should be back online after a few moments.''
    
[[File:Networking_rut_manual_vlan_tagged_based_device_settings_realtek_vlan_id3_v1.png|border|class=tlt-border]]
 
[[File:Networking_rut_manual_vlan_tagged_based_device_settings_realtek_vlan_id3_v1.png|border|class=tlt-border]]
   −
 
+
Open Command Prompt on your pc and enter the command “ipconfig /all”.  You will see that you now have an IP address from the LAN_3 network.
    
[[File:Networking_rut_manual_vlan_tagged_based_device_settings_command_prompt_id3_v1.png|border|class=tlt-border]]
 
[[File:Networking_rut_manual_vlan_tagged_based_device_settings_command_prompt_id3_v1.png|border|class=tlt-border]]
   −
 
+
Delete VLAN ID 3 and add VLAN ID 1 and enter the “ipconfig /all" command in Command Prompt again and you should receive an IP address from the LAN network.
    
[[File:Networking_rut_manual_vlan_tagged_based_device_settings_command_prompt_id1_v1.png|border|class=tlt-border]]
 
[[File:Networking_rut_manual_vlan_tagged_based_device_settings_command_prompt_id1_v1.png|border|class=tlt-border]]
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/93611"

Navigation menu