Changes

Add the new IP address for the LAN interface

Add the new IP address for the LAN interface

'''Note:''' The LANS must be on a different subnet from each other. For example: LAN 192.168.1.1, LAN_2, 192.168.10.1,   LAN_3 192.168.15.1

'''''Note:''''' ''The LANS must be on a different subnet from each other. For example: LAN 192.168.1.1, LAN_2, 192.168.10.1, LAN_3 192.168.15.1''

[[File:Networking_rut_manual_vlan_tagged_based_device_settings_lan_ip_address_v1.png|border|class=tlt-border]]

[[File:Networking_rut_manual_vlan_tagged_based_device_settings_lan_ip_address_v1.png|border|class=tlt-border]]

Click Save & Apply

Click Save & Apply

'''Note:''' You can Tag more than one VLAN for the Same Port with “Tagged”, meaning multiple Tagged VLANs can be used on the same Port.  In this example I have turned on “Tagged” for VLAN 1 and VLAN 3 on LAN 3 for testing later.   

'''''Note:''''' ''You can Tag more than one VLAN for the Same Port with “Tagged”, meaning multiple Tagged VLANs can be used on the same Port.  In this example I have turned on “Tagged” for VLAN 1 and VLAN 3 on LAN 3 for testing later.''  

[[File:Networking_rut_manual_vlan_tagged_based_device_settings_vlan_tagged_v1.png|border|class=tlt-border]]

[[File:Networking_rut_manual_vlan_tagged_based_device_settings_vlan_tagged_v1.png|border|class=tlt-border]]

[[File:Networking_rut_manual_vlan_tagged_based_device_settings_command_prompt_id1_v1.png|border|class=tlt-border]]

[[File:Networking_rut_manual_vlan_tagged_based_device_settings_command_prompt_id1_v1.png|border|class=tlt-border]]