What is a Netmask?

From Teltonika Networks Wiki
Revision as of 05:58, 15 June 2021 by Dziugas (talk | contribs) (Reverted edits by 2A02:AA1:160C:4B0A:FCA5:3346:C939:ABBC (talk) to last revision by 78.56.249.86)

Main Page > FAQ > Networking > What is a Netmask?

AAAA Netmask is a 32-bit "mask" used to divide an IP address into subnets and specify the network's available hosts. In a netmask, two bits are always automatically assigned. For example, in 255.255.225.0, "0" is the assigned network address. In 255.255.255.255, "255" is the assigned broadcast address. The 0 and 255 are always assigned and cannot be used.

Netmask defines how "large" a network is or if you're configuring a rule that requires an IP address and a Netmask, the Netmask will signify to what range of the Network the rule will apply to:

IP NETMASK DESCRIPTION
192.168.55.161 255.255.255.255 Only applies to 192.168.55.161
192.168.55.0 255.255.255.0 Applies to IPs in the 192.168.55.0 - 192.168.55.255 range
192.168.55.240 255.255.255.240 192.168.55.240 - 192.168.55.255
192.168.55.161 255.255.255.0 192.168.55.0 - 192.168.55.255
192.168.0.0 255.255.0.0 192.168.0.0 - 192.168.255.255


Sometimes you will see that a Netmask is defined by one number, e.g., 24. This number is the length of the Netmask in bits:

NETMASK 255. 255. 255. 255
Netmask length 8 16 24 32


So, for example, a Netmask that is 24-bits long is 255.255.255.0:

NETMASK 255. 255. 255. 0
Netmask length 8 16 24 -


A Netmask that is 16-bits long is 255.255.0.0:

NETMASK 255. 255. 0. 0
Netmask length 8 16 - -

And so on.