Changes

Wireless Mesh configuration example (view source)

Revision as of 11:37, 18 March 2022

149 bytes added ,  11:37, 18 March 2022
no edit summary
Line 7: Line 7:  
     <li>Other routers will operate as mesh nodes.  </li>
 
     <li>Other routers will operate as mesh nodes.  </li>
 
</ol>
 
</ol>
 +
==Topology==
 
==Configuration==
 
==Configuration==
 
===Mesh gateway===
 
===Mesh gateway===
Line 17: Line 18:  
[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_gateway_configuration_v2.png|border|class=tlt-border]]   
 
[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_gateway_configuration_v2.png|border|class=tlt-border]]   
 
[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_gateway_configuration_2_v2.png|border|class=tlt-border]]  
 
[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_gateway_configuration_2_v2.png|border|class=tlt-border]]  
−
----
  −
===Mesh nodes===
  −
In order to avoid conflicts, each node router needs to be leased their LAN IP by mesh gateway. To do so: 
  −
# Access router‘s WebUI. Navigate to '''Network''' → '''Interfaces'''.</li>
  −
# Press pencil icon on the right of the LAN interface.</li>
  −
# Change Protocol to DHCP.</li> 
  −
[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_node_configuration_1_v2.png|border|class=tlt-border]]
  −
[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_node_configuration_2_v2.png|border|class=tlt-border]]
   
----
 
----
 
===Common settings===
 
===Common settings===
Line 46: Line 39:  
[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_common_configuration_6_v2.png|border|class=tlt-border]]
 
[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_common_configuration_6_v2.png|border|class=tlt-border]]
 
[[File:Networking rutx11 configuration example wireless mesh mesh common configuration 7 v2.png|border|class=tlt-border]]
 
[[File:Networking rutx11 configuration example wireless mesh mesh common configuration 7 v2.png|border|class=tlt-border]]
 +
----
 +
===Mesh nodes===
 +
In order to avoid conflicts, each node router needs to be leased their LAN IP by mesh gateway. These settings should also be set after configuring access and mesh points setting, as, otherwise, you will loose access to the router. To do so: 
 +
# Access router‘s WebUI. Navigate to '''Network''' → '''Interfaces'''.</li>
 +
# Press pencil icon on the right of the LAN interface.</li>
 +
# Change Protocol to DHCP.</li> 
 +
[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_node_configuration_1_v2.png|border|class=tlt-border]]
 +
[[File:Networking_rutx11_configuration_example_wireless_mesh_mesh_node_configuration_2_v2.png|border|class=tlt-border]]
 
==Testing the configuration==
 
==Testing the configuration==
 
There are several ways to check the connection.  
 
There are several ways to check the connection.  
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/89744"

Navigation menu