Changes

==Configuration==

==Configuration==

<b>Step 1</b>: go to www.zerotier.com and register an account. After the registration you will be able to create a network in the networks tab:

<ol>

 

    <li>Go to www.zerotier.com and register an account. After the registration you will be able to create a network in the networks tab:<br>[[File:Zerotier_1.png|1000px]]</li>

[[File:Zerotier_1.png]]

----

----

<b>Step 2</b>: your new created network should look somewhat similar to this:

    <li>Your new created network should look somewhat similar to this:<br>[[File:Zerotier_2.png|1000px]]<br>You will need to remember your <b>Network ID</b> and assign IP addresses that will not conflict with your current networks on your devices. You also need to decide your access control which will decide if you want to control who has access to your network (Private Network) or just allow everyone in (Public Network).</li>

 

[[File:Zerotier_2.png]]

----

----

<b>Step 3</b>:

    <li>Find out the public IP addresses of your routers. You can do this by visiting a website like [https://www.whatsmyip.org/ whatsmyip.org] or by using the <b><i>curl ifconfig.co</i></b> command via CLI or SSH.</li>

 

[[File:Zerotier_3.png]]

----

----

<b>Step 4</b>:  

    <li>Navigate to the <b>Services → VPN → Zerotier</b> page. Enable Zerotier, specify your network ID and save:<br>[[File:Zerotier_6.png|1000px]]<br>The first time Zerotier is enabled it creates a unique address for you which can take a bit of time.</li>

 

[[File:Zerotier_4.png]]

----

----