CAP700 LEDs

This page contains information the different types of LEDs and their behaviour on a CAP700 device.

Power LED

The power LED is located on the bottom of the front panel under LED button.

It indicates whether the device is powered on or not.

State	Description
LED turned on	Device is powered on.
LED turned off	Device is not powered on.

The WiFi LED is located on the bottom of the front panel under LED button.

They display whether a WiFi Access Point (AP) is active.

State	Description
WiFi LED turned on	At least one 2.4/5 GHz Access Point is running.
WiFi LED turned off	No 2.4/5 GHz Access Points are running.

The Ethernet port LEDs are located on the device's back panel, under each respective Ethernet port.

State	Description
LED on	Operating as a (LAN - 10/100/1000Mbps connection; WAN - 10/100/1000/2500Mbps connection).
LED off	No link established.
LED blinking	Connection established and there is activity on this port (data being transferred).

The mobile network type LEDs are located on the bottom of the front panel under LED button.

They display which type of Internet connection is currently active.

Action	Description
4G/3G LED turned on	Device is connected to a 3G/4G network.
5G LED turned on	Device is connected to a 5G network using 5G SA.
4G/3G blinking	Device is connected to a 4G/3G network but hasn't received an IP address.
5G blinking	Device is connected to a 5G SA network but hasn't received an IP address.
All network type LEDs blinking at the same time every 500 ms	No SIM card or incorrect PIN.

The LED button is located on the bottom of the front panel.

All LEDs can be turned off by pressing the LED button.

Action	Description
4G/3G, 5G, WiFi LED blinks	The device reboots.
4G/3G, 5G, WiFi LEDs light up one after the other and stay on continuously	Factory reset.