RUT240 User Scripts

From Wiki Knowledge Base | Teltonika Networks
This is the approved revision of this page, as well as being the most recent.
Main Page > RUT Routers > RUT240 > RUT240 Manual > RUT240 WebUI > RUT240 System section > RUT240 User Scripts

The information in this page is updated in accordance with firmware version RUT2XX_R_00.01.13.

Summary[edit | edit source]

The User Scripts function allows users to write their own shell scripts that will be executed during the router's booting process.

This chapter of the user manual provides an overview of the User Scripts page for RUT240 devices.

Startup script management[edit | edit source]

The startup script management section shows the contents of the /etc/rc.local file and allows the user to edit it. This scripts written in this file are executed at the end of the device's start up process. You can also execute the script via a command line interface with the following command:

sh /etc/rc.local

The figure below is an example of the startup script management section:

Networking rutxxx manual user scripts v1.png