RUT955 CLI

From Teltonika Networks Wiki
Main Page > RUT Routers > RUT955 > RUT955 Manual > RUT955 WebUI > RUT955 System section > RUT955 CLI

The information in this page is updated in accordance with firmware version RUT9_R_00.07.00.
Note: click here for the old style WebUI (FW version RUT9XX_R_00.06.08.3 and earlier) user manual page.

Summary[edit source]

The CLI or Command-line interface functionality allows you to enter and execute Linux commands within the device. This manual page provides an overview of the CLI page in RUT955 devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

Networking rut9 manual webui basic advanced mode.gif

CLI[edit source]

The RutOS CLI is a console interface similar to the Linux Terminal program. Use the following credentials to log in:

  • Username: root
  • Password: device's password

If the login was successful, you should be greeted with a window similar to this:

Networking rutx11 manual cli v1.png