RUTX08 First Start

From Wiki Knowledge Base | Teltonika Networks
This is the approved revision of this page, as well as being the most recent.
Main Page > RUTX Routers > RUTX08 > RUTX08 First Start

This Wiki page contains the online version of the Quick Start Guide (QSG) for the RUTX08 Ethernet Router. Here you will find an overview of the various components found on the front and back sides of a RUTX08 device, basic hardware installation, first login information, device specifications and general safety information. It is highly recommended that you acquaint yourself with with the Quick Start Guide before using the device. If you own a RUTX08 device, you can also find a printed version of the Quick Start Guide in the device's package.

Rutx08 hd 2 demo.jpg

Front view

No. Description
3 Power socket
4 Reset button
5 LAN Ethernet ports
6 WAN Ethernet port
7 Power LED
Networking rutx08 manual panels front v1.jpg

Back view

No. Description
1 Grounding screw
2 USB connector
Networking rutx08 manual panels back v1.jpg


Power socket pinout
No. Description Wire color
1 Power Red
2 Ground Black
3 Input Green
4 Output White
Trb142 power socket pinout v3.png

Configure your computer (Windows)

  1. Enable the Ethernet network connection (go to Start → Control Panel → Network and Internet → Network and Sharing Center. In the left panel click the Change adapter settings link. Right click on Ethernet Network Connection and select Enable).

    Qsg rutxxx enable wireless connection v2.png

  2. Setup Ethernet network adapter on your computer (right click on Ethernet Network Connection and select Properties. After that select Internet Protocol Version 4 (TCP/IP) and click Properties).
  3. Select Obtain IP address and Obtain DNS server address automatically if they are not selected. Click OK.

    Qsg rutxxx obtain ip address automatically v2.png

Login to device

  1. To enter the router's Web interface (WebUI), type into the URL field of your Internet browser.
  2. Use the following login information when prompted for authentication:

    Qsg rutxxx routers web interface v2.png

  3. After you login, you will be prompted to change your password for security reasons. The new password must contain at least 8 characters, including at least one uppercase letter, one lowercase letter and one digit. This step is mandatory and you will not be able to interact with the router's WebUI before you change the password.
  4. When you change the router's password, the Configuration Wizard will start. The Configuration Wizard is a tool used to setup some of the router's main operating parameters.

Safety information

The RUTX08 router must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.

Bundled accessories specifications
Power AC/DC power adapter 12 V 1.5 A, 4 pin plug

Qsg rut950 manual.PNG This sign on the package means that is necessary to read the User's Manual before you start using the device.

Qsg rut950 recycle.PNG This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste.