RUTX09 CLI

From Wiki Knowledge Base | Teltonika Networks
This is the approved revision of this page, as well as being the most recent.
Main Page > RUTX Routers > RUTX09 > RUTX09 Manual > RUTX09 WebUI > RUTX09 Services section > RUTX09 CLI

The information in this page is updated in accordance with firmware version RUTX_R_00.02.04.1.

Contents

Summary[edit | edit source]

The CLI or Command Line Interface functionality allows you to enter and execute Linux commands within the device. This manual page provides an overview of the CLI page in RUTX09 devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

Networking rutx manual webui basic advanced mode v1.gif

CLI[edit | edit source]

CLI is a console interface similar to the Linux Terminal program. Use the following credentials to log in:

  • Username: root
  • Password: device's password

If the login was successful, you should be greeted with a window like this:

Networking rutx11 manual cli v1.png