RUTX09 Realtime Graphs

From Wiki Knowledge Base | Teltonika Networks
This is the approved revision of this page, as well as being the most recent.
Main Page > RUTX Routers > RUTX09 > RUTX09 Manual > RUTX09 WebUI > RUTX09 Status section > RUTX09 Realtime Graphs

The information in this page is updated in accordance with firmware version RUTX_R_00.02.04.1.

Summary[edit | edit source]

The Graphs section contains various graphs that display various statistical data changes in real time. This chapter is an overview of the Graphs section in RUTX09 routers.

Load[edit | edit source]

The Realtime Load section displays a tri-graph that illustrates average CPU load values in real time. The graph consists out of three color coded graphs, each one corresponding to the average CPU load over 1 (red), 5 (orange) and 15 (yellow) most recent minutes.

The figure below is an example of the Realtime Load graph:

Networking rutx manual realtime graphs load v1.png

Traffic[edit | edit source]

The Realtime Traffic graphs provide users with the possibility to monitor average inbound and outbound traffic over the course of 3 minutes. Each new measurement is taken every 3 seconds. The graphs consist out of two color coded graphs: the green graph shows the outbound traffic, the blue graph shows the inbound traffic. Although not graphed, the page also displays peak loads and averages of inbound and outbound traffic.

The figure below is an example of the Realtime traffic graph for the Bridge connection:

Networking rutx09 11 manual realtime graphs traffic bridge v1.png


The figure below is an example of the Realtime traffic graph for the LAN connection:

Networking rutx09 11 manual realtime graphs traffic lan v1.png


The figure below is an example of the Realtime traffic graph for the wired WAN connection:

Networking rutx09 11 manual realtime graphs traffic wan v1.png



The figure below is an example of the Realtime traffic graph for the mobile (sim card slot 1) connection:

Networking rutx09 11 manual realtime graphs traffic mob v1.png


GRAPH DESCRIPTION
Bridge Cumulative graph, which encompasses wired Ethernet LAN and the wireless network
LAN Displays traffic that passes through the LAN network interface(s) in graph form
WAN Displays traffic that passes through the wired WAN connection in graph form
MobileDisplays traffic that passes through the mobile WAN connection in graph form


Connections[edit | edit source]

The Realtime Connections graph displays currently active network connections with the information about network, protocol, source, destination addresses and transfer speed. The table below the graph displays basic information on active connections.

The figures below are examples of both of the Realtime Connections graph and the corresponding table: Networking rutx manual realtime graphs connections graph v1.png
Networking rutx manual realtime graphs connections ip v1.png