The information in this page is updated in accordance with firmware version RUTX_R_00.07.03.3.
The Logs section contains information on various device related events. This article is an overview of the Logs section for RUTX11 routers.
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
The Events Log section contains a chronological list of various events related to the device. The figure below is an example of the Events Log page:
The Traffic Log section displays traffic which goes through one of the WAN interfaces. The device does collect data for the Traffic Log by default. To see Traffic Log information you must first enable Traffic Logging from the Services → Traffic Logging page.
The figure below is an example of the Traffic Log.
The Hotspot Log section displays Hotspot user information. The figure below is an example of the Hotspot Log.