RUTX11 Printer Server

From Wiki Knowledge Base | Teltonika Networks
This is the approved revision of this page, as well as being the most recent.
Main Page > RUTX Routers > RUTX11 > RUTX11 Manual > RUTX11 WebUI > RUTX11 Services section > RUTX11 Printer Server

The information in this page is updated in accordance with firmware version RUTX_R_00.02.03.1

Summary[edit | edit source]

The Printer Server page is used to set up USB printer settings. After the printer is connected to the router's USB port and configured, it can be utilized by users in the local network (LAN, WiFi) or remotely.

This manual page provides an overview of the Printer Server page in RUTX11 routers.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

Networking rutx manual webui basic advanced mode v1.gif

Printer Server[edit | edit source]

The Printer Server provides the possibility to configure access to a printer that is connected to the USB port of the router. The Add button lets you add and manage additional printers. To configure a printer instance, click the Edit button located next to it:

Networking rutx manual printer server printer server v1.png

Field Value Description
Enable off | on; default: off Turns printer support on or off.
Device file path; default: /dev/usb/lp0 Printer's device file.
Port integer [9100..9109]; default: 9100 Printer's TCP port.
Bidirectional mode off | on; default: on Turns bidirectional mode on or off.

PC and router setup[edit | edit source]

For step-by-step instructions on how to set up a printer for use with the RUTX11 router, click here