RUTX12 CLI
From Wiki Knowledge Base | Teltonika Networks
This is the approved revision of this page, as well as being the most recent.
Main Page > RUTX Routers > RUTX12 > RUTX12 Manual > RUTX12 WebUI > RUTX12 Services section > RUTX12 CLI
The information in this page is updated in accordance with firmware version RUTX_R_00.02.05.1.
Summary[edit | edit source]
The CLI or Command Line Interface functionality allows you to enter and execute Linux commands within the device. This manual page provides an overview of the CLI page in RUTX12 devices.
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
CLI[edit | edit source]
CLI is a console interface similar to the Linux Terminal program. Use the following credentials to log in:
- Username: root
- Password: device's password
If the login was successful, you should be greeted with a window similar to this:
