RUTXR1 Port Mirroring

From Teltonika Networks Wiki
Main Page > RUTX Routers > RUTXR1 > RUTXR1 Manual > RUTXR1 WebUI > RUTXR1 Services section > RUTXR1 Port Mirroring

The information in this page is updated in accordance with firmware version RUTX_R_00.07.05.4.


Port Mirroring is a service that relays a copy of all network packets (incoming and outgoing) on one Ethernet port (Source Port) to another (Monitoring Port). Port Mirroring enables packet monitoring. The service is applied widely, for example, network engineers can use it to analyze and debug data or diagnose errors, security teams can combine it with IDS to inspect traffic for threats on their networks without affecting the packet processing capabilities of the network devices.

This manual page provides an overview of the Port Mirroring page in RUTXR1 devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Networking rutos manual webui basic advanced mode 75.gif

General Settings

The General Settings section is used to set up the main Port Mirroring parameters. Refer to the table below for information on each configuration field.

Networking rutos manual port mirroring general settings v1.png

Field Value Description
Monitoring port LAN ports; default: disabled Defines the port which will mirror the packets.
Source ports LAN ports; default: none Defines the ports whose packets will be mirrored.
Enable mirroring of incoming packets off | on; default: off Enables mirroring of received packets.
Enable mirroring of outgoing packets off | on; default: off Enables mirroring of sent packets.